• 제목/요약/키워드: 컨트롤 밸브

검색결과 123건 처리시간 0.024초

SimulationX를 이용한 부하 감지형 메인 컨트롤밸브의 효율에 관한 연구 (A Study on the Efficiency of a Load Sensing Main Control Valve Using SimulationX)

  • 김동명;이정민;정원지;장주섭
    • 대한기계학회논문집A
    • /
    • 제40권1호
    • /
    • pp.87-95
    • /
    • 2016
  • 본 연구에서는 오픈센터 시스템과 부하 감지형 시스템의 해석모델을 개발하고 시스템의 특성과 효율을 분석하였다. 오픈 센터 방식의 메인 컨트롤 밸브의 압력과 유량 특성을 분석하기 위해 각각의 포트별로 시험을 수행하였다. 시스템의 특성 분석 전 단계에서 시험 결과와 해석 결과를 비교함으로써 해석모델의 신뢰성을 검토하였다. 신뢰성이 검증된 오픈 센터 방식의 메인컨트롤 밸브에 유량 분배 밸브를 추가하여 부하 감지형 메인 컨트롤 밸브의 해석모델을 개발하였다. 두 가지 시스템의 효율을 분석하기 위해 동일한 부하 조건에서 해석을 수행하였으며 각각의 부하 특성에 따른 효율을 검토하였다. 또한, 서로 다른 부하 조건에서 유량 분배 시스템의 특성을 분석함으로써 복합 동작에 대한 성능도 검토 하였다.

콘 디스크 형 컨트롤 밸브의 유동특성 연구 (ANALYSIS OF FLOW CHARACTERISTIC FOR CONE DISC TYPE CONTROL VALVE)

  • 고성호;곽영균;이상현;강민구
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2007년도 추계 학술대회논문집
    • /
    • pp.177-180
    • /
    • 2007
  • A three dimensional numerical analysis has been made for the cone disk control valve and the flat disk control valve. The simulation of the incompressible flow in the each control vale are performed by using the commercial code. Six flow cases of each control valve are investigated.

  • PDF

공압구동용 솔레노이드밸브의 동특성 해석 (Analysis of Dynamic Characteristics of Pneumatic Driving Solenoid Valve)

  • 장제선;김병훈;한상엽
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.731-736
    • /
    • 2011
  • 우주발사체 추진기관 공급계에서 공압구동용 솔레노이드밸브는 제어시시템의 명령이 주어지면 구동가스 배관의 통로를 개폐해서 공압제어장치를 작동시킨다. 공압구동용 솔레노이드밸브의 제작에 앞서 설계검증 및 기본적인 작동특성을 분석하기 위해 AMESim 상용코드를 이용하여 해석모델을 수립하였다. 입구압력에 따른 작동시간을 시험결과와 비교하여 모델을 검증하였고 내부유동 해석결과 (FLUENT)를 이용하여 3차원 형상을 고려하여 모델의 정확도를 높였다. 밸브모델을 이용하여 다양한 설계변수에 따른 밸브의 개폐압력, 작동시간을 계산하여 설계인자 검증 및 작동성능을 분석하였다. 설계변수인 컨트롤밸브의 시트 형상, 주 밸브와 배출밸브의 시트 형상, 실링 직경비, 컨트롤 캐비티부피에 대해 밸브의 동특성 해석을 수행하였다. 해석을 통해 밸브 개폐작동시간, 작동성능, 개방압력을 예상하였다. 본 연구 결과는 한국형발사체 공급계 공압구동용 솔레노이드밸브의 설계/해석능력을 확보하고 밸브의 개발과정에서 효율성을 높일 수 있으며 파생형 밸브의 설계 및 선행연구에 적용할 수 있을 것으로 판단된다.

  • PDF

컨트롤 밸브용 침탄 SCM415강의 마멸 특성 (Wear Characteristics of Carburized SCM415 Steel for Control Valve)

  • 이정원;나성현;윤동현;한순형;김형곤;김재훈
    • 대한기계학회논문집A
    • /
    • 제40권10호
    • /
    • pp.873-878
    • /
    • 2016
  • 컨트롤 밸브용 SCM415강은 밸브케이스와 밸브의 지속적인 운동을 통해 마멸이 발생한다. 마멸은 밸브의 성능을 저하시키고, 사용 수명을 단축시킨다. 본 논문은 컨트롤 밸브용 모재 및 침탄 처리된 SCM415강에 대하여 마멸 특성을 평가하였다. 마멸 시험은 다양한 온도 및 하중에서 왕복동 마모시험기를 이용하여 수행되었으며, 마멸량, 비마멸율 및 마찰계수를 분석하였다. 마멸 메커니즘은 SEM을 통하여 분석하였다. 마멸량에 대한 하중과 온도의 교호작용은 MINITAB을 이용한 분산분석을 수행하였다.

IMV 비례 유량제어밸브 정특성 선형해석 (Liner Analysis of IMV Proportional Flow Control Valve Static Characteristics)

  • 정규홍
    • 드라이브 ㆍ 컨트롤
    • /
    • 제16권4호
    • /
    • pp.56-64
    • /
    • 2019
  • Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

굴삭기 IMV용 비례 유량제어밸브 정특성 해석 (Static Analysis of Dedicated Proportional Flow Control Valve for IMV)

  • 정규홍
    • 드라이브 ㆍ 컨트롤
    • /
    • 제15권4호
    • /
    • pp.39-47
    • /
    • 2018
  • Recently, as environmental regulations for earth-moving equipment have been tightening, advanced systems such as electronic control, have been introduced for energy savings. An IMV (Independent Metering Valve) consisting of four 2-way valves, is an electro-hydraulic control systems that provides more flexible controllability, and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully maximize use of an IMV, the bi-directional flow control valve that can regulate a large amount of flow in both directions, should be adopted. The hydraulic circuit of an IMV applied to an excavator from an overseas construction equipment company, reveals the flow control valve with the compound of proportional solenoid valve for first stage, and 2-way spool valve for the second stage. Moreover, the two spools are interconnected by a feedback spring, presumed to compensate for flow force acting on the second stage spool. This paper addresses the static analysis of flow control valve in an IMV to investigate the improvement of robustness, against flow force by the feedback spring. From the steady-state analysis of flow control valve model, it can be concluded that the feedback spring facilitates maintaining linearity of spool displacement for control input, and relatively constant flow for load disturbance.