• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.3 s.147
• /
• pp.331-339
• /
• 2006

The objective of this paper is to calculate the fatigue strength for upper deck hatch corner insert plate of large container carriers without wave load analysis and global finite element analysis at the initial design stage. Wave load analysis and global F.E. analysis for three container carriers have been performed by GL(Germanischer Lloyd) procedure to propose the equation for hatch corner stress range which is the important factor in fatigue strength calculation. Considering the restraining effect of bulkhead, three types of equation, that is, single tight bulkhead, double tight bulkhead and support bulkhead have been proposed. Using the proposed equations, a simplified fatigue analysis based on GL rules has been performed for two container carriers of which fatigue strength analysis was carried out by GL. From the comparison between fatigue strength result of using the proposed equations and that of GL, it has been found that proposed stress range equations are useful for scantling of upper deck hatch corner insert plates for over 8,000 TEU class container carriers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.963-972
• /
• 2002

선박 거주구는 승무원 및 여객들이 상주하는 곳으로서 대형 상선의 경우 주선체 상부에 건물형태의 높은 구조이므로, 선박의 불균형력과 프로펠러 기진력으로 인해 주 선체와 연성되어 진동이 발생한다. 대형상선의 거주구는 육상구조물과는 달리 주선체와 마찬가지로 강성은 일정하나 화물적재량의 변화에 따라 선박 거주구의 유효질량이 변화함으로 가변적인 진동특성을 갖는 구조물 중의 하나이다. 본 연구에서는 가변 동특성을 갖는 대형상선의 거주구 진동을 수동형 및 능동형 흡진장치를 통하여 제어할 경우 거주구의 고유진동수 변화에 따른 제어성능의 변화를 반영할 수 있으면서도 제어성능과 안정성이 뛰어난 강건제어 시스템의 설계 가능성을 수치 시뮬레이션을 통하여 확인하고자 하였다. 적용대상은 진동문제가 많이 발생하는 컨테이너 운반선과 초대형 원유운반선의 거주구 진동특성을 3차원 유한 요소법을 이용하여 검토하고, 실험적인 방법으로는 거주구 형태의 구조물의 질량변화에 대한 동조형 흡진기의 제어성능을 시험과 선형이차 진동제어 장치의 진동제어성능 실험결과를 소개하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.38-45
• /
• 1998

In this parer, the effects of a skeg, rudder and stern hull form on the manoeuvrability of a container carrier with small length to draft ratio have been investigated through a series of model test. Rudder open water tests and PMM tests were carried out with varying rudder area, afterbody appendages and stern hull form to investigate their effects on the manoeuvrability. The MMG model developed in Japan was used for the manoeuvring simulation with experimentally obtained hydrodynamic coefficients. The result showed that the effects by the variation of stern profile and the skeg below stern bulb are much larger than those by any other types of appendages in improving directional stability of the vessel.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.223-228
• /
• 2007

In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.32-42
• /
• 2007

Container vessels are required to have a large KMT to load many containers which requires a wide transom stern form. The wide transom stern generates large stern waves particularly at the scantling draft. This means that reducing the stern wave leads to resistance reduction. Numerical analyses and Model tests for duck-tail of the stern part have been performed to reduce the resistance of the container vessel having the wide transom on the scantling draft and optimize the form of duck-tail with the change of the design parameter i.e. length and edge height. The optimized duck-tail increases the speed by 0.8 % at scantling draft.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.61-71
• /
• 1999

This paper resents a novel cargo system adapted for a sea port subjected to severe time-varying tide. The proposed system can perform loading or unloading by using a sort of hydraulic elevator associated with real-tim position control. As a preliminary phase, a small-sized model of the cargo system is designed and constructed. The model consists of three principal components ; container palette transfer(CPT) car, platform with lifting columns and cargo ship. The platform activated by the electro-rheological(ER) valve-cylinder is actively controlled to track the position of the cargo ship subjected to be varied due to the time-varying tide and wave motion. Following the derivation of the dynamic model for the platform and cargo ship motions, an appropriate control scheme incorporating time sequence and PID(proportional-integral-derivative) controller is formulated and implemented. Both the simulated and the measured control results are presented to demonstrate the effectiveness of the proposed cargo system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.369-376
• /
• 2021

The International Maritime Organization has developed the Energy Efficiency Design Index, an index related to carbon dioxide emissions, to enforce regulations on newly built ships. In this study, a new type of energy-saving device called the ring stator was used for 158k crude oil carriers, whose hull form was developed as a very thin after-body hull to reduce the resistance by delaying separation. The Energy-Saving Device (ESD) particularly involving the duct, is not adapted to the thin-after body hull form-like container ship. This new ring stator was developed considering these characteristics. A parametric study was conducted through Computational Fluid Dynamics (CFD) analysis using the Star-CCM+ program, and approximately 3.4 % improvement in propulsion efficiency was achieved. Further optimization investigations and experimental studies should be conducted in the future.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.22-30
• /
• 2005

Sloshing loads, produced by the violent liquid free-surface motions inside the cargo tank have become an important design parameter in ship building industry since there have been demands for the increased sizes of the cargo containment system of LNG carriers. In this study, sloshing impact pressure acting on the shell of the spherical cargo tank of an LNG carrier as well as dynamic pressure and flow behavior around the pump tower located at the center of the tank have been calculated. Comparative numerical sloshing simulations for a spherical LNG tank using 2-D LR.FLUIDS which is based on the finite difference method and 3-D MSC.DYTRAN which is capable of calculating nonlinear fluid-structure interaction have been carried out. A method of calculating sloshing-induced dynamic loads and the subsequent structural strength analysis for pump tower of a spherical LNG carrier using MSC. DYTRAN and MSC.NASTRAN have been presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.9-17
• /
• 2005

In the present maritime traffic conditions of Gwangyang harbor, there exists many hazardous factors which may lead to huge accidents including marine oil pollution. To mitigate the danger to vessels in Gwangyang harbor and to secure the safety of maritime environment, we established one way traffic between No.3 Route and No.4 Route, Designed of deep water line on No.3 route, Extended one-way route for Myo-Do Passage etc.

• The Journal of shipping and logistics
• /
• v.34 no.4
• /
• pp.615-635
• /
• 2018

Using data from 2008 to 2017, this study analyzed the financial characteristics of offshore freight shipping companies in Korea, categorized by vessel type, and their impact on business performance. The analysis showed an upward trend in the overall debt ratio of offshore freight transport companies and differences in the financial characteristics of each vessel type as well as the major factors affecting business performance. In particular, the significant factors affecting the ROA performance of the business are the size of business and debt ratio in the LPG line; the growth rate in the bulk line; the size of business, debt ratio, and year in the general freight line; and the size of business, growth rate, entertainment expense rate, debt ratio, and year in the full container line. Therefore, each shipping company needs to recognize differences in key financial factors affecting its performance based on vessel type, implement proactive measures, and diversify its vessel portfolio.