• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.413-414
• /
• 2008

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.311-312
• /
• 2008

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.167-177
• /
• 2013

최근 미세혈관 문합수술 시 봉합사 대신 기계식 문합커플러를 사용하는 수술례가 증가하고 있다. 그러나 기존의 비분해성 문합커플러는 염증반응 뿐만 아니라 수술 후 영구적으로 인체 내에 잔존한다는 한계성이 있다. 따라서 본 연구에서는 기존 비분해성 문합커플러의 한계성을 극복하기 위해 사출성형공정을 이용한 생분해성 PCL 문합커플러 제작을 채택하였다. 사출성형 공정조건 중 실린더온도와 사출압력에 따른 수축률을 계산하고 이에 따른 문합강도를 측정하였다. 그 결과 핀보다는 홀 파트의 수축률 변화가 크게 나타났다. 또한 수축률은 실린더온도가 상승할수록 증가하였으나 반대로 사출압력이 높아질수록 감소하는 경향이 나타났다. PCL 문합 커플러의 in-vitro 분해거동을 12주간 평가한 결과, 수분흡수는 증가하고 분자량은 감소하여 생체분해를 동반한 질량 및 문합강도의 감소를 확인할 수 있었다. 그러나 문합강도의 저하 수준이 전임상 요구조건을 충분히 상회하기에 PCL 문합커플러는 미세혈관수술에 적합한 후보재료임을 파악할 수 있었다.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.81-87
• /
• 2008

High-rise building is taking a place as one of building types from apartment housings to commercial buildings. With taking in account of stability and durability, strength of used materials is increasing gradually in these high-rise buildings. According to this, frequency in use of SD500 re-bar is increasing gradually in high-rise buildings. However the study of SD500 re-bar is insufficient because SD500 re-bar started to be used for domestic buildings lately. Specially because there is no guide or study to refer to, people get into difficulties when to decide the method of re-bar connection in construction using SD500 re-bar. Accordingly in this study, it suggests the method of estimating the economical efficiency on SD500 re-bar connection, and conducts benefit/ cost analysis on lapped splice and coupler splice by applying AHP theory, and then presents its result. After to analyze re-bar diameter of D25, 29, and 32, finally we attained the result that the coupler splice is advantageous in all parts of benefit/ cost more than the lapped splice.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.133-138
• /
• 2015

편광유지 광결정 광섬유를 이용하여 무게센서를 제작하여 실험을 하였다. 본 논문의 센서시스템은 3 dB 커플러, 반파장판, 광원으로 구성되어진다. 무게가 편광유지 광결정 광섬유에 가해지면 파장이동을 측정한다. 센서감지부로 원형형태와 직선형태의 2 종류로 제작하여 특성을 조사하였다. 직선형태로 이루어진 센서의 감도는 680 pm/kg 였으며, 원형형태로 구성된 센서의 감도는 270 pm/kg 이었다. 두 가지 형태로 제작된 센서는 선형성이 좋았으며, 감도는 직선형태로 이루어진 센서가 좋음을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1172-1178
• /
• 2006

Measurement of blade strain with sensors directly installed on the blade has one critical issue, how to send the sensor signal to the ground. Strain-gauges have been dominantly used to directly measure stress of a blade and either a slip ring or a telemetry system has to be used to send measured signal to the ground. However, both systems have many inherent problems and sometimes very severe limitations to be practically used. In this paper, new on-line strain monitoring method using. FBG(Fiber Bragg Grating) sensors and a beam coupler is introduced. Measurement of rotor stress using FBG sensors is nothing new, but unlike other system which installs all necessary instruments on the rotor and use telemetry system to send data to the ground, this system makes use of light's unique characteristic - light travels through space. In this new approach, single optical fiber with many FBG sensors is installed on the blade and all other necessary instruments can be installed at ground thereby giving tremendous advantages over slip ring or telemetry system. A reference sensor is also introduced to compensate the beam coupler's transmission loss change due to rotation. The suggested system's good performance is demonstrated with experiments.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.862-865
• /
• 2007

RFID 시스템에서는 현재 같은 주파수 대역에서 송신 단과 수신 단이 사용되며, 이에 따라 듀플렉서를 사용할 수 없게 되며 커플러를 사용하게 된다. 커플러를 사용함으로써 송신 누설 신호는 수신 단으로 직접적으로 영향을 주며, 이에 따라 태그의 인식 거리가 제한되는 부정적인 영향을 미치게 된다. 본 논문에서는 Rx 단으로 직접 적으로 영 향을 주는 Tx 누설 신호를 감쇄시키는 방법을 소개하고 ADS2006 시뮬레이션으로 이를 검증하였다

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.20-27
• /
• 2010

In this study, we improved problems in the existing product by PARKER and developed the swivel valve tube couplers that can be produced by a low price in Korea. The major development was that a modulized production method was implemented by introducing a part assembling method that uses a cocking jig, and the production cost was reduced by operating the production process more simply than that of PARKER. Also, it was possible to avoid the patient registered by PARKER through the differences in the number of grooving processes and the type of o-ring. In the results of the rotation test by varying its application angle after installing it to a vehicle, it was verified that the structure proposed in this study can endure the eccentric torque and transformation pressure for various angles that have been considered as the problem in the existing fixed tube couplers. In addition, the structure was developed to adopt the problem that represents differences in the installation position of an air tank or the length and direction of hoses according to the type of vehicles produced in vehicle manufacturers. Furthermore, it was possible to verify that the product developed in this study was more excellent than that of PARKER through comparing the performance according to the Federal Motor Vehicle Safety Standard.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.84-90
• /
• 2022

Hydraulic coupling systems play an important role in easily connecting or disconnecting pipes or hoses that transmit high-pressure fluids without hydraulic oil leakage in hydraulic power transmission equipment. A flat-face hydraulic quick coupler is a recently developed product that can reduce environmental pollution by minimizing hydraulic oil leakage during connection and disconnection. In this study, the influence of the shape of the inner ring of a 3/8" flat-face hydraulic quick coupler on its internal flow characteristics was analyzed and evaluated by numerical analysis based on computational fluid dynamics. The flow velocity distribution, temperature distribution, and optimal shape design of the inner ring were obtained by comparing the results of the flow characteristics, such as the pressure drop.