• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.600-605
• /
• 2015

조정은 작은 속도차이가 경기에 큰 영향을 미치는 스포츠이다. 이에 따라 노 주변 유통에 대한 다양한 연구가 진행되어왔지만 정작 노 블레이드를 어떠한 형상으로 설계해야 어떤 영향에 의해 노의 성능이 향상되는지에 대한 연구는 이루어지지 않았다. 본 연구에서는 4-digit NACA 익형 캠버 식을 이용하여 최대 캠버와 최대 캠버 위치를 변화시켜가며 노의 추진력과 효율을 모두 높이는 노 블레이드 형상을 찾아보았다. 연구 결과 최대 캠버의 크기가 크고 최대 캠버의 위치가 블레이드 압전에 가까이 위치할수록 노의 추진력과 효율이 향상되는 것을 확인하였다. 본 연구의 실험 범위에서는 최대 캠버와 최대 캠버의 위치가 각각 시위길이의 4%, 20%인 노 블레이드의 경우 블레이드가 평판인 경우보다 배의 평균속도를 0.18m/s 향상시켰으며, 이는 실제 경기에서 57.2m의 거리 차와 약 13초의 기록차이를 가져온다.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.139-148
• /
• 2006

Valve train is one of the important noise sources in idling engines. Valve train noise comes mostly from two different impacts. One is the impact between cam and tappet at the beginning of the valve open period, which is an important source of impulsive noise of valve trains. The other is the impact between valve and valve seat at the closing of the valve open period. In case of mechanical lash adjusters, it is very difficult to control the initial impact. In this paper, we designed various types of cam profiles, especially in the opening ramp design, and investigated the effect of cam profiles on the magnitude of the initial impact. The effects that some cam design parameters have on the impulsive noise are also observed.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.185-192
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Since the motion of the cam mechanism depends on the shape of the cam and the type of the follower, the shape design procedure must be well defined in order to determine the accurate shape of the cam corresponding to the prescribed motion of the follower. This paper proposes a new approach for designing the shape of disk cams. The proposed relative velocity method uses the relative velocity at center of the follower roller or at contact point between the cam and the follower for 4 different types of the disk cam systems. Also, the relative velocity method for determining the cam profile uses the geometric relationships of the cam and the follower.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.612-615
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Specially cylindrical cam generates three dimensional motions. Thus, the shape design procedures must have high accuracy. This paper proposes the shape design procedure for a cylindrical cam and follower mechanism using a relative velocity method. The relative velocity method and the coordinate transformation are used to find a contact point between the cam and the follower. Also, the full shape of the cylindrical cam can be generated by using the geometric relationships and the contact constraints. As a result, this paper presents an example for the shape design of the cylindrical cam in order to prove the accuracy of the design procedures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.639-642
• /
• 1997

A cylindrical cam with a translation roller follower provides to transfer the translation motion and it s very useful mechanism in the automation. But. it's very difficult that the shape is defined accurately. This paper, proposes a new shape design method of the cylindrical cam with translation roller follower using the relative velocity method[l]. The relativc velocity method lculates the relative velocity of the follower versus the cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematical constraints. Finally, we present an example in order to prove the accuracy of the proposed methods.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1324-1330
• /
• 2003

A cylindrical cam with a translating roller follower provides to change the rotational motion of the cam to the translation motion of the follower. It's a very useful mechanism in the automation. But, it's very difficult that the shape is defined accurately. This paper proposes a shape design method of the cylindrical cam with a translation roller follower using the relative velocity method$\^$(9,11-13)/ : The relative velocity method calculates the relative velocity of the follower versus the cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematical constraints. Finally, we present examples in order to prove the accuracy of the proposed methods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.813-817
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Specially cylindrical cam generates three dimensional motions. Thus, the shape design procedure must have high accuracy. This paper proposes the shape design procedure for a cylindrical cam and follower mechanism using a relative velocity method. The relative velocity method and coordinate transformation are used to find a contact point between cam and follower. Also, the full shape of the cylindrical cam can be generated by using the geometric relationships and the contact constraints. As a result, this paper presents an example for the sape design of the cylindrical cam in order to prove the accuracy of the design procedures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1299-1302
• /
• 2005

Current mechanical devices are trending toward being a small size, high speedy, automation. For performing these functions, machinery elements organizing a machine should be designed exactly. Cams have high confidence and economics in ablility to transmit a motion. Accordingly, A cam mechanism is very important for processing the machine automatically. This paper introduce an inverse cam mechanism. A square shaped cam which cannot be commonly analyzed is designed and manufactured by using the NURBS interpolation algorithm. The objective of this paper is to develop a computer-aided design program. In this paper, a displacement curve of oscillating motion inverse cam mechanism with square shaped follower is analyzed. The data is redistibuted by the NURBS algorithm. A cam shape is designed by the instant velocity center method, and simulated to verify the validity of the operation state.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1613-1616
• /
• 2005

In this paper, we developed an algorithm of generating cam contour curve for hinge mechanism of folder-type mobile phone. The main feature of this hinge mechanism is that we can operate uniform torque to open or close the mobile phone. We divided the opening or closing intervals of the cam into finite sub-intervals, and then we determined the cam contour curve of each sub-interval as a parabolic curve. Finally, these finite parabolic curves form the total cam contour. We can design single cam, which composed moving cam with contour curve and fixed cam that plays only roller, and twin cam with contour curve that is made up the pair of two cams symmetrically.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.125-131
• /
• 1999

For linkage mechanisms driven by a cam, cam profile is the major design factor and is determined by the cam follower motion. If a cam mechanism has additional kinematic linkage besides cam and follower then the follower motion should be specified from the motion of end linkage member so that cam would be able to generate the desired end linkage motion. In this paper, a cam-linkage mechanism is constructed with the combinations of modular linkage elements including cam and follower and as a result, a planar cam-linkage mechanism design software with the cam profile optimization function is developed and presented.