• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.139-142
• /
• 2003

레피어 직기는 1,000rpm 이상의 워터제트와 에어제트 직기의 생산성에 미치지는 못하지만 제직 범위가 넓고 다양한 색사 사용이 가능하다는 장점으로 인해 고급직물을 생산하기 위해 오늘날에도 폭넓게 사용되고 있다. 현재는 외국 선진국뿐만 아니라 국내에서도 레피어직기는 제트직기와 더불어 주력개발기종 중의 하나이다. 근래 레피어직기의 개발방향은 고속화에 주력하고 있다. 레피어를 고속화하기 위한 시도는 위입구동부, 바디침기구, 개구부, 송출부 및 권취부 등 전반적으로 검토되어야 하지만 본 연구에서는 바디침기구의 고속화를 위해 바디침기구의 구동원이 되는 구동캠의 성능향상에 목적을 두고 수행되었다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.7-15
• /
• 2009

This paper introduces a new variable valve actuation mechanism with movable second cam center. Valve lift and open duration can be continuously varied according to engine speed and load conditions. A new method to analyze the kinematic relations between the first and second cam profiles and valve motion are also introduced. Because of rocker motion of the second cam, conventional motion conversion program could not be used in this problem. An example shows continuous variations of valve motion and adequate ramp incorporation throughout all valve lift modes. Valve acceleration profile at the high lift mode is similar to that of conventional valvetrains. Contact geometry analysis of the mechanism gives basic information on the load conditions between the components.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.871-883
• /
• 1997

Kinetodynamics of a cam driving slider mechanism consists of kinematic analysis and force analysis. The kinematic analysis is to determine the kinematic characteristics of a cam driving mechanism and a slider mechanism. The force analysis is to determine the joint forces of links, the contact forces of the cam and follower, and the driving torque of a main shaft. This paper proposes a close loop method and a tangent substitution method to formulate the relationships of kinematic chains and to calculate the displacement, velocity and acceleration of the cam driving slider mechanism. Also, and instant velocity center method is proposed to determine the cam shape from the geometric relationships of the cam and the roller follower. For dynamic analysis, the contact force and the driving torque of the cam driving slider mechanism are calculated from the required sliding forces, sliding motion and weight of the slider.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.98-101
• /
• 1999

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.52-59
• /
• 2003

Cam mechanism is a machine part frequently used in machinery. Specially, conjugate cam mechanism is very suitable for the high speed working and the heavy power translation. Then a conjugate cam mechanism need high precision for the relations between cam profiles and follower rollers. So, its design and manufacturing are very difficult. Thus, this study is a branch of exclusive CAM systems for design and NC machining of conjugate earn mechanism based on a master plate earn profile in order to exchange an old plate cam mechanism to a new conjugate earn mechanism. For the design of the other cam profile by using a master cam profile, some calculation processes were used by vector summation methods, from master cam profile data to the center data of master follower, from the center data of master follower to the center data of the other follower considered in link mechanism, and offsetting in the center direction of base circle of the other cam from the center data of the other follower. Finally, a sample conjugate cam was selected and machined m order to prove the contents of this study.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.83-90
• /
• 2005

A mirror cam mechanism a kind of conjugate cam mechanism consists of two cams, two rollers, and two links. Since profiles of two mirror cam are identical, a simultaneous machining of two cams is achievable. Some machining errors on cam profiles do not result in the internal acting force, which often causes problems in high speed cam mechanism between two links. Also, since angular accelerations of two links are same, the internal acting force by the difference of the angular accelerations does not occur in the mechanism. Thus the mirror cam mechanism is very useful in high speed machinery. This paper studies a design method as well as a machining method, and develops an exclusive CAD/CAM software for mirror cam profiles. The developed CAD/CAM software is applied to a typical mirror cam mechanism and a mock-up equipment is built in order to test the machinism mirror cm. Experimental investigations show that the contact between cam surface and roller surface according to cam rotation agrees well with the simulation on the developed CAD/CAM software.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.528-529
• /
• 2010

VVA(Variable Valve Actuation) 기술은 엔진의 흡기 밸브 작동 모드를 가변하여, 엔진의 연비와 성능을 향상시키는 차세대 엔진 기술이다. 흡기캠에 의해 밸브가 직접 작동되는 일반 엔진과 달리 VVA 엔진은 흡기캠, VVA기구, 모터, 제어기 등에 의해 밸브 작동 모드가 정밀하게 제어되므로, 엔진에서 발생되는 손실을 줄여 연비가 크게 향상되고 엔진의 최고 성능이 향상된다. 또한 VVA 엔진을 장착한 차량은 차량의 발진 응답성이 향상되고, 배기가스 배출량을 줄일 수 있어 친환경 저연비 차량을 실현하는데 핵심 차량부품기술이다. 본 논문에서는 이와 같은 VVA 기구의 적용을 위한 DC모터 및 제어기를 개발하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.591-596
• /
• 2022

Since 4-bar linkage widely used in various industrial fields has a fixed link length, it is inconvenient to add an independent link structure or control device to change the movement of output link. Therefore, this paper proposes a new concept of variable 4-bar linkage mechanism to selectively adjust the movement of the output link to fit desired situations, and applied to the commercial table fans, which is a representative product using a 4-bar linkage system. The optimal rotation angle steps for efficiency are determined experimentally and the appropriate lengths of linkage to fit each step are calculated analytically. Changes in the linkage length are implemented by the rotational motion using a grooved cylindrical cam and the feasibility of the proposed variable linkage mechanism is verified through fabrication and measurement. The presented variable link mechanism is expected to improve the efficiency of industrial robots and fuel valve systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.55-60
• /
• 2013

Compound bows use levering systems consisting of cables and cam pulleys to bend limbs that are much stiffer than those of recurve bows, thus storing more energy while requiring less force for the archer to hold the bow at a fully drawn position. Many patents have thus far been proposed to improve the efficiency and performance of compound bows through empirical methods, whereas only a few analytical methods have been proposed. In this light, this paper presents a method for the kinematic analysis of levering systems in compound bows so that a designer can easily predict the effects of changes in the cam profiles and limb materials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.897-904
• /
• 2008

Egg grading machine is used in poultry raising industry to classify eggs by their weight and to pack up them. Packer holder mechanism is a main part of the egg grading machine, of which role is to take eggs fallen from conveyor belt, and afterward to transfer eggs vertically to mold tray. The vertical motion of packer holder is usually driven by slider-crank mechanism or cam. This paper describes development of the cam in packer holder based on kinematic analysis of packer holder mechanism and measurement of acceleration and noise of the cam to verify performance of it. Several cams that are designed and manufactured by the author of this paper according to different design specification are compared to determine the best solution for egg transfer in the packer holder mechanism.