• 한국식품저장유통학회지
• /
• 제17권1호
• /
• pp.151-159
• /
• 2010

전자선 조사에 따른 캠벨얼리 포도의 휘발성 유기성분의 조성과 저장 후(0, 30일)의 변화를 확인하고자 본 연구를 수행하였다. 캠벨얼리 포도에 0.25, 0.5, 0.75 및 1 kGy의 선량으로 전자선 조사한 후 SDE 방법으로 휘발성 유기성분을 추출하고 GC/MS로 분석하였다. 포도와 전자선 조사된 포도의 주요 화합물로는 butanol, hexanal, [E]-2-hexenal, hexanol, 3-methyl-butanol 등이 동정되었으며 전자선 조사에 따른 전체적인 휘발성 유기성분의 조성은 변화가 없었고 정량적인 변화만 관찰되었다. $4^{\circ}C$에서 30일 동안 저장된 포도에서는 대부분의 화합물의 함량이 감소되는 것을 확인하였으나 추숙의 영향으로 일부 ester 류 및 aldehyde 류 화합물의 함량이 증가하였다. 일부 화합물의 감소와 증가는 조사선량과 관계없이 불규칙적인 양상을 나타내어 전자선 조사가 저장된 포도의 휘발성 유기성분에 크게 영향을 미치지 않는 것으로 사료되었다. 전자선 조사된 포도의 휘발성 유기성분은 1 kGy 이하 선량의 사용이 가능할 것으로 판단되나 위생화 처리 방안으로 활용되기 위해서는 다양한 실험 방법을 통한 지속적인 연구가 필요할 것으로 사료된다.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.88-94
• /
• 2009

In this paper, vibration characteristics after applying variable speed control to fans with a rated speed used in a power plant are studied by performing experiments and analyzing finite element models. Then the campbell diagram is presented to verify the reason of the abnormal vibration measured from fan structure during variable operation of Forced Draft Fan & Induced Draft Fan. According to results, it is found that amplitude of acceleration increases abruptly when a 2X harmonic component meets the natural frequency of fan rotor. Therefore it is very important thing that investigate exactly dynamic characteristics for the rotor at variable speed zone before applying variable speed control to a rotor with a rated speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.803-806
• /
• 2002

This paper estimated the stability of centrifuge as its rotating speed compared with the natural frequency of cylinder and screw by finite element analysis. It shows that the one of exciting causes is the tooth passing frequency of input and output parts by the periodic characteristics of transmission error due to an planetary gear having three stages. Also, it proposed the critical speed of cylinder and screw by the Campbell diagram.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.764-765
• /
• 2011

In this paper, rotordynamic analyses of the Campbell diagram, critical speeds, and harmonic responses for a TMP rotor system are performed. Since the finite element model of the TMP rotor system has a very large number of degrees of freedom because of its complex geometry, and dynamic analyses for investigating the critical speeds, stability, and harmonic response are repeated for various design parameters, model order reduction (MOR) is necessary to reduce the computational cost. The Krylov-based model order reduction via moment matching significantly speeds up the rotordynamic analyses for the TMP rotor system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.262-265
• /
• 2006

The purpose of this study is to design 200 kW, 15,000 rpm 3 phase induction motor. This research deals with natural frequency and mode shape of rotating shaft of 3 phase induction motor with bearing stiffness by finite element analysis. We present natural frequency characteristic variation of rotating shaft according to change bearing stiffness. Also we are verified stability of rotating shaft from backward and forward critical speed by campbell diagram.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.78-85
• /
• 2007

In this study, we performed finite element analysis for the design of a medical centrifuge and two-types of centrifuge were compared with each other. The types of centrifuge are 2-arm straight type and 3-arm type. Structural analysis was done with respect to the change of the rotational speed of the rotor of a centrifuge. When the rotor of centrifuge was rotated, the von Mises stress of 2-arm straight type-rotor was compared with the von Mises stress of 3-arm type. The margin of safety was estimated from the result. We found the critical speed of centrifuge from the campbell diagram by modal analysis.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.82-84
• /
• 2015

유한요소법을 이용하여 카페리선 제작 시 축계의 제작 및 강도의 문제를 Campbell Diagram 및 Modal 해석을 통한 동특성 분석을 하였다. 이를 통하여 양방향 차도선의 추진 방향 및 후진 방향 축계 작동 시 공진 현상 및 위험속도를 분석 결과 안정성을 보인 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.329-336
• /
• 2015

This paper presents a sorting method of mode vectors and natural frequencies about a rotor-journal bearing system. The rotor is solved by the finite element method, the bearing stiffness and damping coefficient are solved by the finite difference method. At any rotation speed section through the eigenvalue analysis of the system, mode vectors and natural frequencies not sorted are confirmed via the Campbell diagram and the MAC(modal assurance criterion). To sort mode vectors and natural frequencies of the section, a mode sorting method is presented through a method of rearranging the MAC of the mode vectors. Finally, the mode vectors and the natural frequencies are sorted by using the presented method, these are verified through the MAC.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.566-572
• /
• 2013

In the present study, structure analysis has been performed to understand the deflection and stress distribution for a hybrid street-lamp having a vertical-axis wind turbine and a photovoltaic panel. Modal analysis is also evaluated to avoid resonance gerenerated by sychronism between a turbine and a lamppost. To analyze deflection, stress and frequency, general analysis code(ANSYS-Mechanical 13) is employed in the present work. Throughout structure analysis in the hybrid street-lamp, maximum stress is observed at the connecting position between a turbine blade and a blade supporter. Campbell diagram which is combined the natural frequency of turbine blades and blade passing frequency is presented to analyze a system resonance. It is found that the resonance of the system having a rotating turbine blade and a lamppost can avoid by the optimal selection of geometric parameters of a wind turbine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1057-1067
• /
• 2010

다단 기어연쇄, 베어링, 축, 로터로 구성되는 함포용 synchro system의 구동장치를 개발하기 위하여, AGMA규격에 의한 기어 굽힘강도, 면압강도해석, 기어치형설계를 포함한 정적설계를 수행하였다. 또한 전달행렬법을 효과적으로 적용시킬 수 있는 Hibner's branch법과 자유도가 큰 경우에도 계산 오차 없이 고유특성치를 빠뜨리지 않고 산출할 수 있는 ${\lambda}$-matrix법을 도입하여 함포용 Synchro system의 좌우 선회용과 상하 고각형의 위험속도 해석 및 평가를 하였고, 운전속도 범위 내에 위험속도가 존재하지 않았다.