• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.869-879
• /
• 1991

본 연구에서는 여러가지 평판 캠 기구에 대하여 효율적이며 정밀한 설계 및 가공을 할 수 있도록 CAD/CAM 소프트웨어를 개발하는데 목적이 있다. 즉, 주어진 캠 곡선과 캠 기구의 구성조건을 바탕으로 포락선 이론에 의하여 캠 형상을 구하고, 원하 는 가공 방법을 선정하여 황삭가공과 정삭가공에 대한 NC 파트프로그램을 얻는 기능들 을 하나의 통합된 CAD/CAM 소프트웨어로 구성하여 생산성과 효율성 및 정밀성 향상에 기여하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.519-528
• /
• 1998

A numerical method is presented for the dynamic analysis of cam and follower. Contact and separation between the cam and the follower are analyzed by imposing dynamic contact condition. The correct solution is obtained without spurious oscillation by imposing the velocity and acceleration constraints as well as the displacement constraint on the possible contact point. The constraints are satisfied by iteratively reducing the constraint errors toward zero, and a simple time integration of ordinary differential equation is employed for the solution of the equation of motion. The solution procedure associated with the iterative scheme is presented, and numerical simulations are conducted to demonstrate the accuracy of the solution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.361-367
• /
• 2010

The barrel cam, which is a type of cylindrical cam, has been widely used as a part of index drive units for automatic manufacturing machines. The axis of rotation of the barrel cam is orthogonal to the axis of rotation of the follower. The index drive rotates or dwells depending on the cam profile, while the cam rotates with a constant velocity. Continuous sliding contact between the barrel cam and the follower surfaces causes wearing of the adhesive between them. This study shows that the contact force between two sliding bodies is responsible for the wear of the barrel cam in the paper-cup-forming machine. This contact force is calculated by using the multibody dynamics model of the paper-cup-forming machine. The analytical result is validated by comparing it to the actual wear spots on the real product.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.225-225
• /
• 2003

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.167-172
• /
• 2004

A method for the design of a disk cam with a remote follower is presented. ADAMS software is utilized for the design process. The whole process is applied for the design of a cam profile to be used in a tappet shedding device of a shuttle loom. First the desired motion of the remote follower, the hearld frame in this case, is determined to improve the characteristic of a certain weaving process. Next, the desired displacement data is input to the ADAMS software and the cam profile is obtained as an output. To test the validity of the proposed method, designed cams were actually manufactured and implemented on a experimental loom. And with the help of potentiometer type displacement transducers, the motion of the remote followers were actually recorded. And the result was sufficient to prove the validity of the presented method.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.185-192
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Since the motion of the cam mechanism depends on the shape of the cam and the type of the follower, the shape design procedure must be well defined in order to determine the accurate shape of the cam corresponding to the prescribed motion of the follower. This paper proposes a new approach for designing the shape of disk cams. The proposed relative velocity method uses the relative velocity at center of the follower roller or at contact point between the cam and the follower for 4 different types of the disk cam systems. Also, the relative velocity method for determining the cam profile uses the geometric relationships of the cam and the follower.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.612-615
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Specially cylindrical cam generates three dimensional motions. Thus, the shape design procedures must have high accuracy. This paper proposes the shape design procedure for a cylindrical cam and follower mechanism using a relative velocity method. The relative velocity method and the coordinate transformation are used to find a contact point between the cam and the follower. Also, the full shape of the cylindrical cam can be generated by using the geometric relationships and the contact constraints. As a result, this paper presents an example for the shape design of the cylindrical cam in order to prove the accuracy of the design procedures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1324-1330
• /
• 2003

A cylindrical cam with a translating roller follower provides to change the rotational motion of the cam to the translation motion of the follower. It's a very useful mechanism in the automation. But, it's very difficult that the shape is defined accurately. This paper proposes a shape design method of the cylindrical cam with a translation roller follower using the relative velocity method$\^$(9,11-13)/ : The relative velocity method calculates the relative velocity of the follower versus the cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematical constraints. Finally, we present examples in order to prove the accuracy of the proposed methods.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1361-1371
• /
• 1993

The effort of this paper is to develop a methodology of computer aided design and manufacture of spatial cams. The integrated CAD/CAM systems for spatial cams are developed to enable manufacturer to design and machine them readily. The contour of spatial cams can be obtained by applying envelope theory to the cam/follower motion. The mathematical cam contour is evaluated at some increment to generate the numerical data for the CNC programming. Incremental generation of points along a cam contour can be accomplished in consideration with the specified tolerance. The computerized procedure is described in detail with accompanying examples.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.678-683
• /
• 2010

The drum cam with rotational follower is used to apply the ATC and index table of machine tools and it has the merit of minimizing the backlash. In general, to machine the drum cam with rotational follower, 5-axis CNC machine must be used and its kinematic principle must be included in modeling on CAM. So, the commercialized CAM software can't be applied to this machining of drum cam. Though some special software for machining drum cam was developed, it could be applied to special 5-axis CNC machine tools and the finish machining module was not applied. To solve this problem, this study includes the induction of the post processing algorithm for the rough machining of drum cam on several 5-axis CNC machine tools, type AC, AB and Be. The finish machining software will be treated in next study. A sample drum cam was machined on 5-axis CNC machine tool of AC type. The designed geometric profile of drum cam consist to the measured profile after machining well. This post processing algorithm for rough machining of the drum cam was clearly verified.