• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.494-502
• /
• 2016

The accurate assessment of hull-appendage interaction in the early design stage is important to control the inflow to the propeller plane, which can cause undesirable hydrodynamic effects in terms of cavitation phenomenon. This paper describes a numerical analysis for the flow around a fully appended surface ship model for which KRISO has carried out a model test in the Large Cavitation Tunnel(LCT). This numerical study was performed with the LCT model test in a complementary manner for a good reproduction of the wake distribution of surface ships. A second order accurate finite volume method provided by a commercial computational fluid dynamics(CFD) program was used to solve the governing Reynolds Averaged Navier-Stokes(RANS) equations, where the SST $k-{\omega}$ model was used for turbulence closure. The numerical results were compared to available LCT experimental data for validation. The calculations gave good predictions for the boundary layer profiles on the walls of the empty cavitation tunnel and the wake at the propeller plane of the fully appended hull model in the LCT.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.271-279
• /
• 2022

In order to study the self-propulsion test and analysis techniques for the submerged body with pumpjet propulsors in the Large Cavitation Tunnel (LCT), at the Korea Research Institute of Ships and Ocean Engineering, a set of test equipment was designed and manufactured. The pumpjet propulsor is composed of rotor, stator and duct which results in the strong interaction between the components. To measure the thrust and torque for duct and stator, a ring-shaped sensor was applied. The test equipment including pumpjet is installed on the stern of the submerged body. As the whole pumpjet including duct and stator was considered as the propulsor from pumpjet open-water test, the self-propulsion test was conducted in the same way. The total thrust, combined thrust of rotor, duct and stator was used for the pumpjet self-propulsion test analysis. Accordingly, the self-propulsion test and analysis were conducted in the same way as those of the conventional propeller. The full-scale performances of the pumpjet propulsor were compared with those of the reference propeller. On the basis of the present study, it is thought that the pumpjet propulsor would be designed optimally.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.66-75
• /
• 1993

캐비테이션 터널에서 모형선 혹은 부분모형선을 사용하여 3차원 반류분포를 재현시키고자 할 때, 유동조절체를 사용하여 터널 위벽효과(Tunnel wall effect)를 감소시키는 경우가 있다. 유동조절체가 선미후류 유동에 미치는 영향과 터널 위벽효과를 해석하기 위하여 직사각형 단면의 시험부에 설치되어 있는 모형선과 유동조절체 주위 유동을 표면양력판 이론을 사용하여 해석하였다. Sydney Express 모형선 주위 유동에 대한 계산결과에 의하면 선체 표면 압력분포에 미치는 캐비테이션 터널의 위벽효과는 막음비(Blockage)가 5% 이내인 경우에는 무시할 정도이며, 막음비가 20% 이상인 경우에는 상당히 큼을 알 수 있다. 유동조절체를 선미 부근 터널벽에 설치함으로써 선미 유동중 축방향속도가 증가되었으며, 선체표면에서의 압력구배(pressure gradient)는 선미 경계층의 두께가 덜 증가되는 방향으로 변화되었음을 알 수 있었다. 유동조절체를 설치하여 재현된 반류분포는 등속도곡선의 폭이 좁아지기 때문에 추정된 실선반류 분포를 재현하기 위하여 유동조절체를 사용하는 경우가 있다. 표면양력판에 의해 계산된 반류분포는 이상유체 가정을 토대로 계산되었기 때문에 계측된 반류분포와의 차이를 보정하기 위해서는 경계층 계산이나 점성유동계산이 필요하다.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.122-131
• /
• 2010

The increasing size and speed of cargo ships result in high speed flow in propeller slipstream, and thereby cavitation is frequently observed on and around a rudder system. Rudder gap cavitation is the most difficult one to control and suppress among various types of the cavitation on a rudder system. In the present study, experiments of the incipient cavitation and pressure measurement were carried out for typical cargo ship rudder sections with and without the suppression devices, which were suggested by the authors. Fundamental understanding of the rudder gap cavitation inception was obtained along with its relevance to the surface pressure distribution. It is confirmed that the gap flow blocking devices effectively suppress the rudder gap cavitation and, at the same time, augment lift.

• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.10-16
• /
• 2021

This paper systematically investigates and correlates pressure fluctuation and nominal wake characteristics according to the angle of the vortex generators by introducing the angle adjustment method of the Vortex Generator (VG). The vortex generators are installed at the port and starboard of a model ship. The vortex generator performance test is executed on a model ship installed in the Large Cavitation Tunnel (LCT) and the angle of VG is freely controlled by a servo motor. The systematic test results for the vortex generator show that the well-designed VG is an effective appendage for reducing the pressure fluctuation level and shows the direction of VG's angular design optimization.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.428-434
• /
• 2015

The objective of the present study is to analyze the results of the trial-test for the full-scale driving pump, which is arranged in the LCT (Large Cavitation Tunnel). Firstly, the reasons of selecting the final design pump are introduced in terms of the performance analysis in model tests. The trial-test items for the full-scale driving pump are measurements of output current/voltage at the inverter of the main motor and the flow velocity in the LCT test section. The test results show the increase in flow rate of about 10.7% and the decrease in pump head of about 26%, compared with those of final design-pump specification. The motor power has the margin of about 22%. The performance analysis for the full-scale pump is conducted using the commercial code (CFX-10). The delivered power calculated with CFX-10 shows good agreement with that extracted from the full-scale pump test. It is found that CFX-10 is useful to analyze a full-scale pump.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.408-416
• /
• 2007

This paper summarizes an experimental study on the marine propeller BPF noise. The main objective of this study is to show the worthiness of the noise measurement at the MOERI middle size cavitation tunnel and to acquire useful propeller noise data. Background noise of MOERI(Maritime and Ocean Engineering Research Institute) cavitation tunnel is experimentally analyzed. Experiment carried out in the MOERI cavitation tunnel with wake screen or dummy body, which is simulated the wake. Propeller BPF noise is measured under various operating conditions. In order to secure the reliance of measured propeller noise dada, background noise of each operating conditions are measured and analyzed. The noise characteristics are analyzed according to the operating condition.

• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.133-139
• /
• 2020

In order to study the resistance test technique for the submerged body in Large Cavitation Tunnel (LCT), DARPA Suboff, submarine model publicly available was manufactured. DTRC released the resistance test data of DARPA Suboff conducted at ship speeds up to 18.0 knots in high-speed towing tank in 1990. As LCT is considered restricted waterways with walls, the resistance test results must be corrected with three wall blockage effects called buoyancy effect, solid blockage effect and wake blockage effect. Before correction, the resistance of LCT was 16~20 % higher than that of DTRC. After correction, the resistance and the resistance coefficients were compared with those of DTRC. The corrected resistance of LCT shows good agreement with that of DTRC. The residual resistance coefficient shows the difference according to the calculation method of buoyancy and frictional resistance coefficient. This paper suggests the best way for the calculation of residual resistance coefficient, On the basis of the present study, it is thought that the operating conditions for the propeller cavitation and noise tests can be drawn through LCT tests.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.58-65
• /
• 2021

In order to study the self-propulsion test and analysis techniques for the submerged body in Large Cavitation Tunnel (LCT). DARPA Suboff, a submarine model publicly available was manufactured. The resistance results of DARPA Suboff was acquired from the LCT tests and compared with those of DTRC. After the wall blockage correction, the resistance results of LCT were in good agreement with those of DTRC. On the basis of the resistance results of LCT, the self-propulsion tests were conducted in LCT. The test objective was to get the full-scale propeller operating conditions for the propeller cavitation and noise tests. The test results of DARPA Suboff were analyzed in a way similar to the analysis techniques of those of the Towing Tank (TT). Another submerged body, for which self-propulsion tests were conducted in TT, was selected for results verification. The results of LCT were in good agreement with those of TT. On the basis of the present study, it is thought that the operating conditions for the full-scale submerged body can be drawn through LCT tests.

• 대한조선학회논문집
• /
• 제59권3호
• /
• pp.149-156
• /
• 2022

In order to study the open-water test and analysis techniques for pumpjet propulsors in the Large Cavitation Tunnel (LCT), at the Korea Research Institute of Ships and Ocean Engineering, a set of test equipment was designed and manufactured. The pumpjet propulsor is composed of rotor, stator and duct resulting in the strong interaction between the components. A ring-shaped sensor was developed to measure the thrust and torque for duct and stator. The test equipment including the pumpjet is installed on an existing POW dynamometer in the reverse direction. The results from the reverse POW test setup were validated against those from the conventional POW test setup in the Towing Tank (TT) as well as in the LCT. The pumpjet open-water test was conducted at the Reynolds number of around 1.0×106, at which the obtained experimental data became stable in the Reynolds number effect test. The open-water test for the rotor (rotor-only) was conducted to study whether the duct and stator should be considered as a part of the hull or the propulsor. On the basis of the test results, it was shown that the duct and stator could be included in the propulsor. The total thrust, combined thrust of rotor, duct, and stator was used for the pumpjet open-water test analysis. As the whole pumpjet is defined as a propulsor, it is thought that the self-propulsion test and analysis could be conducted in the same way as that of the conventional propeller.