• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.327-327
• /
• 2011

DLC 필름은 바이오 적합성, 특히 생체 적합성이 뛰어나기 때문에 바이오 코팅분야에서 널리 이용된다. 많은 연구 결과에 의하면 세포와 장기 등이 바이오 재료 표면에 적절히 접합할 수 있도록, 재료 표면을 산소나 질소를 이용하여 플라즈마 처리로 초친수성 표면으로 개질하고 있다. 하지만, 시간이 지남에 따라서 친수성 표면은 점차 재료의 표면 처리 전의 성질인 소수성을 회복하게 된다. D실제 생체에 적용하기 위해서 이러한 시효 효과에 대한 정확한 평가가 이루어져야 한다. 따라서 산소와 질소 플라즈마 처리 후의 친수성 성질이 소수성 성질로 변해가는 거동을 조사하는게 중요하다. 13.56 MHz의 plasma assisted chemical vapor deposition (PACVD) 법을 이용하여 DLC와 Si-DLC를 500 ${\mu}m$ 두께의 P-type 실리콘(100) 기판에 증착하였다. 박막 증착 과정에 사용한 기체는 벤젠과 희석된 silane이 사용되었다(SiH4/H2=10:90). 박막 증착은 -400 V의 바이어스 전압을 인가하였으며, 이때 증착 압력은 1.33Pa으로 일정하게 유지하여, 두께 $0.55{\pm}0.01{\mu}m$로 증착하였다. X-ray Photoelectron Spectroscopy (XPS) 법을 이용하여 실리콘 함량을 측정하였으며, 증착 된 Si-DLC의 실리콘 함량은 0~4.88 at. %였다. 이후에 질소와 산소 플라즈마를 이용하여 챔버 압력을 1.33 Pa로 유지하여, -400 V의 바이어스 전압을 인가하여 10분간 표면 처리를 하였다. 표면 처리된 DLC와 Si-DLC 표면 위에서의 물방울(water droplet)의 젖음각을 20일간 측정하였다. 플라즈마 표면 처리 된 모든 시편에서 초기 젖음각은 $10{\sim}20^{\circ}$의 친수성 성질을 보였지만, 점차 젖음각이 상승하여 산소 플라즈마 처리 된 Si-DLC를 제외하고는 5일이 지나면서 거의 소수성 표면으로 회복되었다. 산소 플라즈마 처리 된 Si-DLC의 경우, 젖음 각 측정 기간(20일) 동안 $15^{\circ}$ 미만의 친수성 성질을 유지하였다.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.247-254
• /
• 1994

Nonionic surfactants, diglycerol N-acyl glutamates were prepared through the esterification of N-acryl glutamic acids and glycidol in the presence of quarternary ammonium salts. Their cmc evaluated by the surface tension method was $0.15{\sim}0.75mol/{\ell}$, and the surface tension of aqueous solution was decreased to 28~35dyne/cm. L-DGLG with acyl group of carbon number of 12 showed good foaming power and emulsifying power, and the emulsifying power in toluene was stronger than in soybean oil. Dispersion effect of L-DGPG and L-DGSG with acyl group of carbon number of 16 and 18 in carbon black and ferric oxide were higher than L-DGLG. All of them showed good biodegradability at $20^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.4
• /
• pp.336-343
• /
• 2014

Modern advanced-turboprop propellers are required to have high structural strength to cope with the thrust requirement at high speed. The high stiffness and strength carbon/epoxy composite material is used for the major structure and skin-spar-foam sandwich structural type is adopted for advantage in terms of the blade weight. As a design procedure for the present study, the structural design load is estimated through investigation on aerodynamic load and then flanges of spars from major bending loads and the skin from shear loads are sized using the netting rule and Rule of Mixture. In order to investigate the structural safety and stability, stress analysis is performed by finite element analysis code MSC. NASTRAN. It is found that current methodology of composite structure design is a valid method through the static structural test of prototype blade.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.581-584
• /
• 2020

The effect of a chemical pretreatment on the surface carbon was investigated using a scanning electron microscope (SEM) and electrochemical methods. Primitive carbon has a reducing power likely due to incompletely oxidized functional groups on the surface. We aim to control this reducing power by chemical treatment and apply for the spontaneous deposition of nanoparticles (NPs). Highly ordered pyrolytic graphite (HOPG) was initially treated with a reducing agent, NaBH4 or an oxidizing agent, KMnO₄, for 5 min. Subsequently, the pretreated carbon was immersed in a platinum (Pt) precursor. Unexpectedly, SEM images showed that the reducing agent increased spontaneous PtNPs deposition while the oxidizing agent decreased Pt loading more as compared to that of using bare carbon. However, the amount of Pt on the carbon obviously decreased by NaBH₄ treatment for 50 min. Secondly, spontaneous reduction on pretreated glassy carbon (GC) was investigated using the catalytic hydrogen evolution reaction (HER). GC electrode treated with NaBH4 for a short and long time showed small (onset potential: -640 mV vs. MSE) and large overpotential for the HER, respectively. Although the mechanism is unclear, the electrochemistry results correspond to the optical data. As a proof-of-concept, these results demonstrate that chemical treatments can be used to design the shapes and amounts of deposited catalytic metal on carbon by controlling the surface state.

• Korean Journal of Food Science and Technology
• /
• v.19 no.6
• /
• pp.556-560
• /
• 1987

In this study, silicone oil was added into soybean oil in order to investigate its effect on acid value (AV), carbonyl value (COV), TBA value, fatty acid composition and color intensity of soybean oil during frying at $170^{\circ}C$. It was found that the AV, COV and TBA value were significantly decreased as the concentration of silicone oil increased from 0 to 5 ppm in soybean oil after frying for 7 hours. The color intensity was also decreased by 26% of color of 7 hours-heated soybean oil without silicone oil addition. Little changes in fatty arid composition was measured between the samples after 7 hours frying. From the overall result of this study, addition of silicone oil by 1 ppm was recommended for effective reduction of rancidity development of soybean oil ing frying.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.135-142
• /
• 2002

본 연구는 Chemical hydride 형태의 수소발생제를 포함한 액체연료를 이용한 신개념의 알칼라인 연료전지의 특성을 분석하였다. Chemical hydride는 연료전지의 수소공급원으로써 사용될 수 있으며, 본 연구팀은 KOH 전해질에 수소발생제인 Sodium Borohydride ($NaBH_4$)를 첨가하여 제조된 액체연료를 알칼라인 연료전지에 공급함으서 상온에서 매운 우수한 전기 화학적 성능결과를 얻을 수 있었다. 이때 음극 찰물질로 $ZrCr_{0.8}Ni_{1.2}$ 수소저장합금이 사용되었으며, 양극은 방수처리된 카본지 위에 분산된 Pt/C 가 사용되었고, air가 latm으로 양극에 공급되었다. 음극에 대한 XRD 분석결과 음극에서의 산화에 의해 Sodium Borohydride ($NaBH_4$)가 분해되어 수소가 발생되며, 연속적으로 액체연료가 주입되어도 전지가 작동하는 것을 확인할 수 있었다. 이때 에너지밀도는 6,000 Ah/kg (for $NaBH_4$ or $KBH_4$)이다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.2
• /
• pp.124-131
• /
• 2007

Methane is partially oxidized to produce the syngas by the lattice oxygen of metal oxides in the absence of gaseous oxygen. The present work deals with ferrite including copper component, which does not chemisorb methane, to investigate the suppression of the carbon deposition during the reduction of metal oxides by methane. Iron-based oxides of $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0) was synthesized by the co-precipitation method. Thermogravimetric Analysis(TGA) was used to observe the isothermal reduction behavior of $Cu_xFe_{3-x}O_4$ and $Fe_3O_4$ at $600-900^{\circ}C$ under methane atmosphere. The crystal structures of reduced specimens were characterized by X-rays powder diffraction(XRD) technique. From the analyses of TGA, it is concluded that the reduction kinetics of $CuFe_2O_4$ was the fastest among $Fe_3O_4$ and $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0). The X-ray diffraction analyses indicated that $Cu_xFe_{3-x}O_4$ was decomposed to Cu and $Fe_3O_4$ phase at $600^{\circ}C$ and was reduced to Cu and Fe phase at $800^{\circ}C$. $Fe_3O_4$, which was reduced at $900^{\circ}C$, showed Fe, graphite and $Fe_3C$ phases. On the contrary, $Cu_xFe_{3-x}O_4$ does not show the graphite or $Fe_3C$ phases. This results infer that Cu component suppress the carbon deposition on Cu-ferrite.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.187-192
• /
• 2014

In this article, we report the fabrication and characterization of $CNT/Co_3O_4$ nanocomposite for lithium ion batteries. We expected that the composition with CNT is effective method to compensate for the low electronic conductivity of $Co_3O_4$ and suppress the stress from phase transition of $Co_3O_4$ during cycling. $CNT/Co_3O_4$ nanocomposites were composed of nano-sized $Co_3O_4$ particles, which were homogeneously distributed on the surface of CNTs. The $CNT/Co_3O_4$ electrode presented higher capacity than commercial graphite, good rate capability and stable cyclic performance. This implies that the $CNT/Co_3O_4$ could be a promising anode material for lithium ion batteries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.101-105
• /
• 2001

For high voltage XLPE power cables, semiconducting layers have been applied to prevent discharge at the interface between conductor and insulation, and/or insulation and external shielding layer. The semiconducting layers may be also effective to release electrical stress in the interface. The property of semiconducting layers are significantly related to the quality and reliability of power cables. Generally, these semiconducting layers are formed by extruding, the conductibility of the material is given by the carbon black mixed with base polymer. The life of power cables is depended on the smoothness of the interface between insulation and semiconducting layer. If the smoothness is no good, the life of power cables is shorter because the electrical stress and water tree is increased. The causes of no good smoothness are the void of the interface, the protrusions, the contaminants and impurities of the semiconducting layer. The selection and dispersion of the Carbon Black is the significant factor to determine the life of power cable in the manufacturing of semiconducting compound.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.326-333
• /
• 2003

Even though many studies have been reported about rubber vulcanization, it is still remained difficult to find a quantitative relationship between the final states of vulcanized rubber and initial formulation or processing conditions. Dynamic differential scanning calorimetry (DSC) method is known as a comparatively easy method to research for the rubber vulcanization in both experimental and analysis. In the present research, a study on the vulcanization reaction of NR/CB composites modified by isoprene(IR) and chloroprene(CR) rubbers is carried out using dynamic DSC method. Thermograms with several different heating rates were obtained and analyzed using the Kissinger method. Analysis showed that the vulcanization reaction was progressed through the first order reaction mechanism. In addition, the reaction temperature was severely influenced by the kinds or rubber modifiers, in this case, more influenced by CR than by IR. Those effects were clearly verified in the values of activation energy. Kinds of carbon blacks, however, could hardly influence on the reaction mechanism.