• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.60-65
• /
• 1998

핵융합로 증식재용 Li$_2$TiO$_3$ 분말을 자발착화연소합성법으로 합성하였다. Li질산염과 Ti 질산염이 혼합된 전구용액은 연소반응을 위하여 가열되는 동안 침전물이 형성 되었지만 카르복실산기(carboxylic acid group)와 아민기(amine group)를 지닌 글라이신(glycine)이나 카르복실산기만을 가진 구연산(citric acid)과 아민기만을 가진 우레아(urea)를 흔합한 연료를 사용한 경우에는 연소합성반응이 일어나 분말을 쉽게 합성할 수 있었다. 또한 형성된 분말은 별도의 하소공정이 없더라도 원하는 결정상이 형성되었으며, 합성편 Li$_2$TiO$_3$ 분말은 비표면적이 15 $m^2$/g으로 약 30nm의 크기를 지닌 미세한 입자이었다.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.315-321
• /
• 1987

A high performance liquid chromatographic method was developed for the determination of glycyrrhetinic acid contained in licorice powder. Glycyrrhetinic acid which is hydrolysate of glycyrrhizin extracted from licorice powder, was determined with good result by HPLC using 2-bromoacetyltriphenylene labeling reagent. The glycyrrhetinic acids were labeled with 2-bromoacetyltriphenylene in acetonitrile using 18-crown-6-ether and KOH as a catalyst. Derivatized glycyrrhetinic acids were separated from the extracted licorice powder on a reversed-phase column (chemopak $C_{18}$) using 100% acetonitrile as a mobile phase and monitored by an UV-detector at 268nm. Linearity of calibration curve was obtained between 5 ng and 20 ng, and the lower limit of detection was 2 ng. The recovery of glycyrrhetinic acid to licorice powder was about 99.3%. This method was sensitive, reliable and useful for, determination of glycyrrhetinic acid.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.1 no.1
• /
• pp.69-75
• /
• 1983

Among the gelatin hardness for photographic emulsion, the formal dehyde , dialdehydes, n-Methylol compounds, ketonea, carbonylic acid and carbamic acid derivatives, and s-Triazine derivatives were studied. The greater purts of hardeners formed cross-link by the reaction with ${\varepsilon}$-Amino group in the lysine and OH group in the hydroxylysine. Glutaraldehyde produced most stable cross-link due to the formation of pyridinum ion. 2.5 hexanedione and 3-hexone-2.5-dione possible to use as the ketone hardner . The sodium salt of 2.4-dichloro-6-hydroxy-S-Triazine was newly developed as the olefinic hardners for emulsion.lsion.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.159-166
• /
• 2003

For the purpose of obtaining surface-anionized poly(vinyl alcohol) (PVA) hydrogel beads, vinyl acetate(VAc) and methacrylic acid(MMA) were copolymerized by the suspension polymerization technique and followed by the saponification. It was confirmed by $^1$H-NMR that the copolymerized microspheres contained carboxylic acid groups in their surface. poly(VAc-co-MAA) microspheres were completely saponified in the heterogeneous system. The saponification reaction was laster than that of PVAc microspheres. We observed the swelling property of saponified PVA microspheres treated in the acidic solution and in the alkaline solution successively. Saponified microspheres shrank in acidic solution and swelled in alkaline solution respectively, which was reversible. from the result, saponified microspheres were highly water-absorbing hydrogel beads and were certified -COOH group at their surface by $^1$H-NMR and FT-IR.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.373-380
• /
• 2002

Humic and fulvic acids present in soil of different depth were extracted and their characteristics were analyzed as a basic study to evaluate the effect of humic substances on the behaviour of radioactive elements deposited on soil. Molecular size distribution of the humic and fulvic acids was measured by stirred cell ultrafiltration technique and the structural informations were obtained from their UV-Vis., IR and synchronous fluorescence (SyF) spectral analysis. Main molecular size ranges of the soil 1) humic and fulvic acids were 30~100 kDa (46~56%) and 10~30 kDa (33~43%) respectively, and their overall molecular sizes were found to became smaller with increasing the soil depth. Absorptivities measured at 280 nm in the UV-Visible spectra of humic acids were 1.4~1.5 times higher than those of fulvic acids, and increased with increasing the soil depth. SyF spectral data showed two distinct peak components having maximum peak positions of 428 nm (type I) and 498 nm (type II) for the soil humic and fulvic acids. From the analysis of the peak components, it was found that humic molecules are mainly made up of aromatic compounds corresponding to longer wavelength (type II), and the molecular components increased with increasing the soil depth. Analysis of IR spectral data indicated that the humic molecules contain a higher relative concentration of carboxylic groups than those of fulvic molecules, and the carboxylic group contents are seen to increase as the soil depth increase.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.367-375
• /
• 2011

Succinic acid ester derivatives have been used as additives for the base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-esters were synthesized with over 97% yields by ring-opening reaction of succinic anhydride and fatty alcohol and were soluble in 100 N base oil within 1 wt% concentration. The structures and purities of ester derivatives were confirmed by $^1H-NMR$ and FT-IR spectrum and GC analysis. Anti-corrosion properties of the esters in sea water were evaluated through ASTM D665 method and weight loss method and compared to that of succinic alkyl esters without carboxylic acid group in the molecule. As the results, anti-corrosion properties of succinic acid alkyl half-esters with carboxylic acid group were better than those of succinic acid alkyl esters without carboxylic acid group. And, Anti-corrosion properties of the esters with a shorter alkyl chain of high concentration showed better performance than those with longer alkyl chain of low concentration. Inhibition efficiency % (IE%) of the esters was over 95% in the concentration of 80 ppm and corrosion rate (CR) was below 0.3 mm/year at the same concentration. Thus, the corrosion properties of succinic acid alkyl half-esters result from the carboxylic acid groups in molecules.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.26-34
• /
• 1995

In this study, polysulfone was carboxylated(CPSf), as a method of introducing carboxyl group to polymer main chain using direct lithiation reaction. Then, poly(1-alkyl-4-vinylpyridinium iodide-co-divinylbenzene) (MeVpI-DVB) containing pyridinium cation which has an anion selectivity as a fixed carrier was synthesized. And polymer membranes were prepared by mixing CPSf and MeVpI-DVB. Characteristics and permeation of membranes were investigated. As a result of synthesizing CPSf/MeVpI-DVB, blend was formed, not new copolymer. As the content of CPSf amount increasing, thermal stability of membranes was increasing. Ion exchange capacity was 1.0~1.8(meq/g dry mem.) and water content was 0.16~0.26(g $H_2{O}$)/g dry mem.) and fixed ion concentration was 6.4~7.3(meq/g $H_2{O}$) in synthetic membranes. The $Cl^-$ flux showed an increase due to the increase of CPSf content.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.1
• /
• pp.3-7
• /
• 1978

Quercus serrata degraded by Leminus edodes(berk) Singer was investigated. In order to evaluate on affect of the fungi on the sound logs, and the logs attacted for 2 years and five years were used as a sample tree. Large portions of carbohydrate mainly was decomposed by the fungy. It is supported by the increasing of alkaline extractives and the breaking up of crystallinity. Lignin is transformed considerably as shown the results of the determination of Klason lignin, gel filtration and nitrobezene oxidation. On the other hand, the decreasing of methoxyl group and the increasing of carboxyl group in parallel with demethlation and acidification are presented. Syringyl nuclei unit is decomposed easier than guaiacyl unit. It is also illustrated that the more decreasing of carboxyl group compared with aldehyde group was acidified biodegradation.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.83-90
• /
• 2015

In this study, we investigated optimum conditions for the introduction of a lot of free radical polymerizable methacrylate groups on the multi-walled carbon nanotube (MWCNT) surface. Carboxyl groups were introduced first on MWCNT surfaces by treating with a mixture of sulfuric acid and nitric acid with ultrasonic bath for 2 hours, and oxidized MWCNTs were reacted further with thionyl chloride followed by triethylenetetramine (TETA) to introduce amino groups on the oxidized MWCNT surface, to make MWCNT-$NH_2$. To introduce free radical polymerizable methacrylate groups on the MWCNT-$NH_2$, MWCNT-$NH_2$ was reacted with 3-(acryloyloxy)-2-hydroxypropyl methacrylate (AHM) by Michael addition reaction. We investigated progress of modification reactions for MWCNT by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and elemental analysis (EA). We found maximum degree of Michael addition reactions between AHM and TETA grafted on MWCNT-$NH_2$ for 10:1 mol ratio and 8 hour reaction time in our reaction conditions.