• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.37-46
• /
• 1999

In order to ascertain the safety of the systemic insecticide carbofuran-treated crops, samples of garlic, peanut and potato were collected randomly from markets located in the main producing areas and analyzed for the residue of carbofuran and its main metabolite, 3-hydroxycarbofuran. The in vitro metabolism of carbofuran in phosphate buffer extracts of the crops was investigated. Two (M-12 and M-16) out of 20 mature garlic samples contained 0.13 and 0.07 mg/kg of carbohran, respectively, showing a detection incidence of 10%. The residue levels were less than the maximum residue limit (0.5 ppm) set by Korean Food and Drug Administration. Only one sample of mature garlic (M-12) out of 20 contained 0.13 mg/kg of 3-hydroxycarbofuran. The residues of carbofuran and 3-hydroxycarbofuran in the immature garlic, peanut and potato samples were less than the detection limits, 0.02 mg/kg for carbofuran and 0.06 mg/kg for 3-hydroxycarbofuran. The application of carbofuran to the fields of garlic, peanut and potato would be safe, considering that the estimated maximum acceptable daily intake of carbofuran from garlic was 0.0013 mg which is 0.24% of the maximum acceptable daily intake (0.55 mg). Carbofuran was hydrolyzed in vitro mainly to carbofuran phenol (m/z 164) in the respective phosphate buffer extracts of the three crops in contrast to the major oxidative metabolism in situ. The amount of the metabolite increased with the incubation time.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.207-215
• /
• 2003

This study was carried out to evaluate toxicities of 3 registered insecticides to greenhouse whitefly(GWF), Trialeurodes vaporariorum and sweetpotato whitefly(SWF), Bemisia tabaci, B-biotype. Insecticide activities were evaluated by testing systemic action, residual effect in the laboratory, and control efficacy in the greenhouse. All experiments were tested at the recommended concentration(RC), half and a quarter concentrations of RC of each insecticides. Acetamiprid showed 45%, 42% ovicidal effect to greenhouse whitefly and sweetpotato whitefly at 40 ppm, respectively. Acetamiprid showed more than 97% larvicidal activities on the 3rd instars larvae of GWF and SWF at the recommended and its half concentrations. On the adults of the two whitefly species, acetamiprid and acetamiprid+ethofenprox showed more than 92% mortality even at half of recommended concentrations. Acetamiprid and acetamiprid+ethofenprox showed both residual effect and systemic activity. In the control efficacy test on GWF and SWF, 90% control values were obtained at the 3th day after treatments of acetamiprid and acetamiprid + ethofenprox by application with recommended concentration. These results indicate that acetamiprid and acetamiprid+ethofenprox can be used in the control of the two whitefly species in field.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.94-105
• /
• 2009

Black locust (Robinia pseudoacacia) stand is representative lowland exotic plantation with low ecological quality and arrested succession in South Korea. To facilitate succession and restore natural vegetation, small canopy gaps (${\sim}57m^2$), which can modify minimally structural variables and reduce restoration related disturbances on stand, was established in the black locust stand, and oak (Quercus serrata) seedlings were introduced in the gap. Two types of varying levels were introduced for gap creation; cutting (C) and girdling (G) on canopies. Understory removal (CU and GU) treatment was applied as subtypes of structural modification. Growth (diameter, height and leaf area) of target species and responses (species composition, diversity and coverage) of understory community were monitored during study years (2007~2008). Canopy openness was different significantly among treatments but not for light availability. Based on the result of logistic regression, growth of height and leaf area of seedlings were significant variables on seedling survival. Height and leaf area of seedlings were increased during study years, although radial growth was reduced. During study years, there were no significant differences in species composition and diversity, and total coverage increased about 20%. Increase of resources by gap creation and understory removal likely affect growth of target species. Small gap creation was effective to reduce understory responses in composition and diverstiy. Synthesized, growth of target species and responses of understory community to small canopy gap creation exhibited, in short term, possibility of utilization in alternative forest restoration and management option. Long-term monitoring is necessary to certificate effect of artificial gap creation on forest restoration.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.72-81
• /
• 2016

Feeding behaviors of the pear psylla, Cacopsylla pyricola, and their changing feeding behaviors were recorded and analyzed with an electrical penetration graph (EPG) analysis against 5 insecticides. And their mortality against insecticides were carried out in the laboratory. General feeding behavior patterns of C. pyricola were changed by insecticide treatments. Especially, the type and frequency of waveforms differently occurred depending on a sort of insecticides treated. Total duration of transition to waveform PE1 and phloem ingestion (waveform PE2) were significantly different between treatment and non-treatment of insecticides. When 5 different insecticides were treated on pear leaves, difference of feeding patterns were recorded. In case of treatment of benfuracarb, total duration of non-probes (waveform Np) was appeared higher than any other insecticide. However, when flonicamid and deltamethrin were treatment, total duration of stylet penetration (waveform PA) and xylem ingestion (waveform PG) were appeared higher than other insecticide, respectively. As results feeding behaviour of C. pyricola after treated insecticides with time-based consumed rate of C. pyricola, the rate of non-probe (waveform Np) was longer than start penetration (waveform PA), penetration and ingestion in parenchyma cells (waveform PC1+PC2), ingestion at phloem (waveform PD+PE1+PE2) and xylem (waveform PG). As result of direct spray treatment to C. pyricola, mortality of C. pyricola against imidacloprid was higher than any other insecticide on 24 hours after treatment. However, all of insecticides showed 100% mortality of after 48 hours. On the other hand, when 5 insecticides sprayed on the pear leaves and then C. pyricola located on the treated leaves, benfuracarb showed the most toxicity against C. pyricola among insecticides. These result was consistent with the EPG results that showed relatively longer total duration time of waveform Np (non-probes) by benfuracarb treatment.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.394-402
• /
• 2002

2급 복합레진 수복 와동의 치은 변연이 상아질 상에 있을 때 유동성 레진 이장의 유무와 두께가 미세누출에 미치는 영향을 알아보기 위해 본 실험을 시행하였다. 60개의 발거된 대구치의 근, 원심면에 각각 협설측 3mm, 치은벽 깊이 1mm의 2급 와동을 형성하고 치은 변연은 법랑-백아 경계에서 약 1mm 하방에 위치 시켰다. 모든 와동을 32% 인산으로 15초 처리 및 30초 수세 후 Prime & Bond$^{\circledR}$ NT 상아질 접착제를 적용하였고, Tetric Ceram(TC), Tetric Flow(TF)를 이용하여 다음의 6가지 군으로 나누어 수복하였다. (1) TC로 수평 적층 충전, (2) TC로 수직 적층 충전, (3) 0.5-1mm두께로 TF 이장 후 TC로 수평적층 충전, (4) 0.5-1mm 두께로 TF 이장 후 TC로 수직 적층 충전, (5) 2-3mm 두께로 TF 이장 후 TC로 수평적층 충전, (6) 2-3mm두께로 TF이장 후 TC로 수직 적층 충전. 충전된 시편을 37$^{\circ}C$ 100% humidity에서 24시간 보관하고 5$^{\circ}C$와 55$^{\circ}C$에서 500회의 열순환을 실시하여 치은 변연의 0.5mm 외부에 nail varnish를 도포 하여 2% methylene blue 용액에 12시간 침잠시켰다. 시편을 아크릴릭 레진에 매몰하여 수복물의 중앙에서 종절단 한 후 입체현미경하에서 색소의 침투도를 관찰하여 다음과 같은 결과를 얻었다. 유동성 레진의 이장을 시행한 군과 하지 않은 군간에 미세누출은 유의차를 보이지 않았다(p>0.05) 유동성 레진의 두께에 따른 미세누출의 차이는 나타나지 않았다(p>0.05) 경사면 충전법을 시행한 군에서는 유동성 레진을 이장한 군들이 이장하지 않은 군보다 유의하게 많은 누출을 보였다(p<0.05). 수평적층 충전법을 시행한 군에서는 유동성 레진 이장이 미세누출에 유의한 차이를 보이지 않았다(p>0.05).

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.19-31
• /
• 2014

In order to investigate ground state change visually in physical model during centrifuge testing, electrical resistivity survey was adopted. Commercial resistivity survey equipment verified at various in-situ sites was utilized. The resistivity survey equipment installed in centrifuge facility was remotely controlled through intranet and electrical resistivity images obtained while centrifuge testing was being checked by real-time inversion. To verify the stable operation of the developed resistivity survey system, preliminary tests were conducted. Model ground was uniformly constructed using unsaturated soil and saline water was dropped on the ground surface to simulate contaminant flow situation. During the 10 g centrifuge tests, electrical resistivity was continuously detected and the testing results were compared with those of identically carried out 1 g centrifuge tests. In addition, the electrical resistivity was directly measured immediately after the centrifuge test by open cutting the model. Finally, reliability of electrical resistivity survey in the centrifuge test was verified by comparing those testing results.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.866-875
• /
• 2001

In this work, thermal decomposition mechanism based on kinetic parameters and thermal stability of carbon fiber-reinforced carbon matrix composites (C/C composites), have been studied under high temperature oxidative conditions with addition of tetra-ethylorthosilicate (TEOS) as an oxidation inhibitor. Thermogravimetric analysis (TGA) was executed to evaluate the thermal decomposition mechanism and thermal stability of C/C composites in the temperature range of 30 ～ $850^{\circ}C$. As a result, the kinetic parameters of the composites impregnated with TEOS, i.e., activation energy for thermal decomposition ($E_d$), order of reaction (n) , and pre-exponential factor (A) were evaluated as 136 kJ/mol, 0, and 2.3$\times$$10^9s^{-1}$, respectively. Especially, the IPDT and $E_d$ of C/C composites impregnated with TEOS were improved largely compared with the composites impregnated without TEOS, due to the formation of $SiO_2$ on composite surfaces, resulting in interrupting the oxygen attack to carbon active site in the composites.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.25-30
• /
• 2006

When wet soil overlies dry soil, which can be found in the infiltration test, the radar wave is not attenuated and guided within wet soil layer. This phenomenon is known to be the dispersive guided wave and happens when the thickness of upper wet layer is less than or comparable to the wavelength of radar wave. In this study, we have conducted the FDTD modeling and obtained the velocity dispersion curve to identify the dispersive guided wave through F-K analysis. This guided wave can be explained by modal propagation theory and a simple inversion code was developed to obtain the two layer's dielectric constants as well as layer thickness. By inverting the dispersion curve from synthetic modeling data, we could obtain the accurate dielectric constants and layer thickness. Moreover, we could enhance the accuracy by including the higher mode data. We expect this method will be very useful to get the quantitative property of subsurface when the condition is similar.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.69-75
• /
• 2004

The degree of the indentation damage and strength degradation for 3Y-TZP ceramics and (Y,Nb)-TZP/$Al_2O_3$ dental implant composites was investigated under the Hertzian cyclic fatigue. Fatigue tests were conducted at contact loads of 500 to 3000 N and up to $10^6$ cycles in exact in vitro environments. At 500 N, no strength degradation and crack generation was observed up to $5{\times}10^5$ contact cycles. Fatigue properties of 3Y-TZP ceramics was superior to (Y,Nb)-TZP/ㅍ composites due to stress relief caused by the phase transformation from tettagonal to monoclinic phase. As contact load increased, the drastic reduction in strength was found when the damage transition from ring to radial crack occurred. The extent of strength degradation was more pronounced in vitro environments probably due to chemical corrosion of artificial saliva through cracks introduced during large numbers of contacts.