• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1030-1034
• /
• 2005

The purpose of this study was to clarify the penetration behavior of particulate matters by wave and tidal actions in sandy beach located in enclosed bay and to evaluate the effect of stranded oil on penetration of particulate matters. Experiments were rallied out using a model sandy beach facility. The particulate matters penetrated into saturated sediments by wave action from breaking wave run-up point with a semi-circular forming in low energy beach as enclosed bay. On the other hand, the penetration velocity of the particulate matters was to be faster according to the increase of slope and breaking wave height. The particulate matters by tidal action penetrated into the sediments at an angie of 45 degrees in the direction of porous water flow. The stranded oil completely blocked the penetration of the particulate matters into the sediments. These results indicate that the penetrated oil prevents the penetration of the particulate matters into the sediments and, therefore, results in the reduction in the supply of plankton, bacteria and organic detritus for the benthic organisms in the sandy beach.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.17-27
• /
• 2003

In this study, a phenomenon of saltwater intrusion was monitored under various conditions regarding recharge and pumping rate using time domain reflectometry for a laboratory scale unconfined aquifer to verify the basic theory behind seawater intrusion and to investigate movement of salt-freshwater interface in accordance with the ratio of pumping and recharge rate. Results showed that a thick mixing zone was formed at the boundary instead of a sharp salt-freshwater interface that was assumed by Ghyben and Herzberg who derived an equation relating the water table depth $(H_f)$ to the depth to the interface $(H_s)$. Therefore our experimental results did not agree with the calculated values obtained from the Ghyben and Herzberg equation. Position of interface which was adopted as 0.5 g/L isochlor moved rapidly as the Pumping rate $(Q_p)$ increased for a given recharge rate $(Q_r)$. In addition, interface movement was found to be about 7 times the ratio of $Q_p/Q_r$ in our experimental condition. This indicates that Pumping rate becomes an important factor controlling the seawater intrusion in coastal aquifer.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.247-250
• /
• 2022

The maximum cutting force (MCF) was measured and analyzed under various conditions using a Miller/Hoseney toughness rig to measure the toughness of bread due to aging. In the bread crust, the MCF increased significantly as the cross-head speed increased, and different type of significant difference between the samples were observed under some measurement conditions (p<0.05). Within the bread, the MCF increased significantly as the cross-head speed increased at the same penetration ratio, and the significant differences between the samples did not change even if the cross-head speed changed regardless of the penetration ratio. In conclusion, when using this method to measure the toughness of bread (apart from the crust), the MCF varied with the changing measurement conditions; however, the significant difference between the samples did not change. Thus, MCF can be considered a useful and reliable parameter when measuring the difference between the samples.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.3-11
• /
• 1998

본 논문에서는 분포정수선로의 간단한 모델을 이용해서, 외부에서 진동을 가했을 때 에 뼈 표면에서 발생하는 굴곡파의 전파속도와 종파의 전파속도를 구할 수 있는 새로운 측 정원리를 제안했다. 이 측정원리를 이용해서, 봉(brass, polymethylmethacrylate)표면에 발생 하는 정재파에 대한 속도의 공간분포를 laser Doppler법으로 측정해서, 각각의 주파수에 대 한 전파속도를 구했다. 이 새로운 측정방법은 in vivo에서 초음파 Doppler법을 이용해서 뼈 의 이상(골다공증, osteoporosis)진단의 가능성을 제시했다.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.73-82
• /
• 2017

Recently, offshore bucket cut-off walls were developed to solve several problems in conventional offshore cut-off walls. In this study, a numerical analysis was carried out to investigate the seepage stability of offshore bucket cut-off walls. The ground was assumed as uniform homogeneous sand and steady state flow conditions were applied. The flow condition was compared among 2-dimensional flow (2-D), 2-dimensional concentrated flow (2-DC), and axisymmetric flow. The analysis results showed that the seepage velocities in axisymmetric flow were about 1.5 and 2 times larger than those of 2-DC and 2-D flow conditions, respectively. Thereafter, the axisymmetric flow condition was applied because the seepage flow was concentrated toward the center of the circular-shaped wall. A parametric study was performed varying bucket radius, penetration depth, total head difference between in and outside of the wall. The exit gradient, which used for the calculation of piping stability, decreased with increase of the penetration depth and bucket radius. Design charts were proposed to estimate the factor of safety and the exit gradient at various analysis conditions. Finally, the design equation was proposed to calculate the exit gradient for the preliminary design of the bucket cut-off wall.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.1
• /
• pp.39-48
• /
• 2017

We present penetration depth (PD) computation algorithms using explicit Minkowski sum construction ($PD_e$) and implicit Minkowski sum construction ($PD_i$). Minkowski sum construction is the most time consuming part in fast PD computation. In order to address this issue, we find a candidate solution using a centroid difference and motion coherence. Then, $PD_e$ constructs or updates partial Minkowski sum around the candidate solution. In contrast, $PD_i$ constructs only a tangent plane to the Minkowski sums iteratively. In practice, our algorithms can compute PD for complicated models consisting of thousands of triangles in a few milli-seconds. We also discuss the benefits of using different construction of Minkowski sums in the context of PD.

• The Journal of Engineering Geology
• /
• v.21 no.2
• /
• pp.133-145
• /
• 2011

Unsaturated soil column tests were performed for weathered gneiss soil and weathered granite soil to assess the relationship between infiltration velocity and rainfall condition for different rainfall durations and for multiple rainfall events separated by dry periods of various lengths (herein, 'rainfall break duration'). The volumetric water content was measured using TDR (Time Domain Reflectometry) sensors at regular time intervals. For the column tests, rainfall intensity was 20 mm/h and we varied the rainfall duration and rainfall break duration. The unit weight of weathered gneiss soil was designed 1.21 $g/cm^3$, which is lower than the in situ unit weight without overflow in the column. The in situ unit weight for weathered granite soil was designed 1.35 $g/cm^3$. The initial infiltration velocity of precipitation for the two weathered soils under total amount of rainfall as much as 200 mm conditions was $2.090{\times}10^{-3}$ to $2.854{\times}10^{-3}$ cm/s and $1.692{\times}10^{-3}$ to $2.012{\times}10^{-3}$ cm/s, respectively. These rates are higher than the repeated-infiltration velocities of precipitation under total amount of rainfall as much as 100 mm conditions ($1.309{\times}10^{-3}$ to $1.871{\times}10^{-3}$ cm/s and $1.175{\times}10^{-3}$ to $1.581{\times}10^{-3}$ cm/s, respectively), because the amount of precipitation under 200 mm conditions is more than that under 100 mm conditions. The repeated-infiltration velocities of weathered gneiss soil and weathered granite soil were $1.309{\times}10^{-3}$ to $2.854{\times}10^{-3}$ cm/s and $1.175{\times}10^{-3}$ to $2.012{\times}10^{-3}$ cm/s, respectively, being higher than the first-infiltration velocities ($1.307{\times}10^{-2}$ to $1.718{\times}10^{-2}$ cm/s and $1.789{\times}10^{-2}$ to $2.070{\times}10^{-2}$ cm/s, respectively). The results reflect the effect of reduced matric suction due to a reduction in the amount of air in the soil.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.449-453
• /
• 2005

하천의 물리적 생태적 특성에 대한 연구는 하천유형분류의 기초 자료로서 큰 의미가 있다. 그러나 국내의 경우 이를 위한 하천의 조사는 매우 드물며, 국부적이었다. 더욱이 이러한 생태적 물리적 특성을 근거로 한 하천 유형적 특성을 연구한 사례는 없었다. 본 연구에서는 하천의 유형을 분류하는 것은 아니지만 하천을 더욱 효율적으로 계획하고 관리하는데 필요한 기초자료를 구축하고자 하였다. 그리하여 1차적 연구로 자연환경이 유사한 하천들을 일시에 선정하여 동일한 방법으로 각 하천의 물리적 생태적 특성을 조사하고 평가하여 대상 하천의 공통적 특성을 가려내고자 하였다. 이와 관련하여 본 연구에서는 하천의 물리적 구조조사법을 유럽공동체에서 사용하는 기준과 방법에 따라 시범적으로 실시하여 국내하천의 하천환경조사를 위한 적용성 여부도 진단하고자 하였다. 하천의 물리적 구조등급이란 하천의 공간적 환경과 저수로 하상재료의 물리적 차이를 의미하는 것으로 하천 자체는 물론 하천범람지에 영향을 주는 생태적 기능의 수리 특성, 하천의 물리 특성, 수생태 특성 등을 포괄하게 된다. 따라서 하천의 물리적 구조등급은 하천구조의 생태적 질과 하천구조로 나타나게 되는 동적 과정(dynamic process)의 질을 평가하는 척도가 될 수 있다. 본 연구에서는 남한강수계의 청미천, 양화천, 복하천을 대상으로 물리적 구조조사법과 식생조사를 병행하였으며 이로부터 하천의 물리적 구조등급이 수질등급과 정량적이지는 않지만 전반적인 하천의 생태성 또는 자연도를 가늠할 수 있는 하나의 지료로 활용할 수 있음을 알 수 있었다.양토를 기준으로 할 때 강우량과 침투수의 관계는 $I_{10}(mm)=0.44R(mm)+5.8(r^2=0.55)$이었다. y절이 발생한 이유는 이전 강우에 의해 침투되고 있는 물이 있음을 함축하며 기울기 0.40은 강우의 $40\%$가 지하로 침투하였음을 의미한다. 침투수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 1.12로 가장 컸고, 식양토 0.94, 식토 0.91로 평가되었다. 이는 토성간의 침투속도 및 투수속도의 경향이 반영된 것이다. 경사에 따라서는 경사도가 증가할수록 지수적으로 감소하였으며 $10\% 경사일 때를 기준으로 $I(mm)=I_{10}{\times}1.17{\times}e^{-0.0164s(\%)}$로 나타났다. 같은 조건에서 강우량과 유거수의 관계는 $Ro_{10}(mm)=5.32e^{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.349-360
• /
• 2004

This study calculated the pore water pressure, the depth of seepage, the constant of the strength in accordance with the slope inclination and the rainfall intensity over the slope built by the weathered granite soil (SP, SM). And, the change of the shear strength in accordance with the rainfall has been compared and analyzed by applying the shear strength formula of the unsaturated soil. As a result, the rainfall intensity is stronger and the slope inclination is gentler the seepage speed in accordance with the rainfall became faster proportionally. As a result of comparing and analyzing both the theoretical value of Lumb and the actual value of the model, it can be said that the actual value is faster. Since SM shows the bigger shear strength than SP, it can also be said that as the granules increase, the coefficient of permeability becomes smaller; and as the seepage rate became smaller, it affects the seepage speed. Likewise, the shear strength within the slope displays the smallest shear strength at the inclination of 1:1.5 the reason of its decrease turned out that it was due to the increase of the pore water pressure.

• Defense and Technology
• /
• no.12 s.250
• /
• pp.46-53
• /
• 1999

미래 전술기의 생존성을 향상시키기 위한 기술적 수단으로 효과측면에서 충분히 고려할만한 가치가 있다고 생각되는 것을 다음과 같은 6개 항목으로 제한된다. (1) 침투비행시의 비행속도를 증가시킨다. (2) 침투비행시의 비행고도를 낮게 유지한다. (3)탑재무장에 큰 스탠드 오프 특성을 부여한다. (4) 탑재무장의 유도방식을 Fire and Forget 특성을 갖게 한다. (5) 기체에 스텔스 기술을 적극 활용한다. (6) EMC 능력을 더욱 강화시킨다.