• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.191-196
• /
• 1981

In order to utilize the Koryangju distillers' grain for the acetic acid fermentation, the extracting methods and effects of the extracts on the fermentations were investigated. The result obtained are as follows. 1. Cold extracting method by which the distillers grain is extracted with 3 times of water for 60 hours at room temperature was better than hot extracting method in terms of the fermentation rate and the quality of vinegar product. 2. Optimum conditions and some results of surface fermentation based on the medium added by the extracts are as follows, optimum amount of the extracts to be added to the medium is 20-30% of total media; acetic acid production rate at log phase was 0.16g/100$m\ell$, hr.; recovery was 91.17%; and the time of 40 hours was required for the completion of fermentation. 3. Organoleptic quality of the vinegar which is produced by adding the extracts was superior to two commercial products examined.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.9-16
• /
• 1997

Cut-off methods of controlling leachate migration from waste landfills and contaminated sites are studied. Permeability and chemical compatibility tests are prrforlned on slurry wall materials including soil-bentonite, cement-bentonite, cement / fly ash-bentonite, plastic concrete. Hydraulic conductivity of soil-bentonite mixture is the lowest of these four bacuill materials. The leachate from municipal solid waste has little influence on the permeability of the backfill materials. The bentonite slurry becomes flocculated and aggregated when exposed to the leachate. The results of the permeability test showed that the hydraulic conductivities of the backfill materials are in the order soil-beiltonite, Plastic concrete, cement-bentonite. And the result c: the compatibility test showed increase in permeability due to the effects of leachate. Thus, in designing the slurry wall it is essential to check the behaviour of the bentonite slurry and backfill materials on the compatibility with the contaminants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.50-54
• /
• 2008

NIR spectroscopy is newly developed tools determining the soil properties. Phosphorus in soil is one of the most difficult and time consuming elements to assess for plant needs. The calibration coefficient(R) of NIR method for total phosphorus by $HClO_4$ and $Na_2CO_3$ P was 0.91 and 0.88, and available phosphorus by Lancaster and Bray 1. extractant was 0.88 and 0.82. According to Williams guidelines for the calibration coefficient, NIR method could also be used for estimating total and available phosphorus if one performed optimal calibration for predicting soil properties. Applicability of NIR spectra, if improved accuracy, may allow the use of soil testing.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.189-195
• /
• 1999

A study on the separation Cu, Ni, and Co was carried out using LIX 84 leachate, chelate extractant. For this test, artificial test solution was prepared by varing concentrations of Cu, Ni, Co, $(NH_4)_2CO_3$ and $(NH_4)_2SO_4$. It found that pH of the solution was very important factor for the separation of nickel from copper. The results showed that nickel was effectively extracted from copper by using LIX 84 at pH 1.0 to 1.2. The volume ration or organic to aqueous phases was 1.0. According to the McCabe-Thiele diagram, the extraction rate of copper was 99 percents at the equal ratio of organic to aqueous phase in three stages.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.17-23
• /
• 1965

These experiments aim to discriminate the seeds which belong to the genus Prunus. In order to carry out these experiments, 19 kinds of Prunus have been used as materials and they have been tested by means of the morphological observation, the statistic analysis of measured data of their length and width and their colour reactions of the hydrochloric acid for the methanol extracts and their water extracts, and their Maeule reactions. From the abovementioned experiments, I have found out the possibilities of the indentificaton of the genus Prunus.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.126-132
• /
• 1992

Experiment has been performed to investigate the thermal and magnetic properties of Mn-ferrite by electrolysis. Using the 0.2%C mild steel as soluble anode and SUS 304 stainless steel as cathode, Mn-ferrite could be made from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. As the result of X-ray diffraction, thermal analysis and magnetic measurement, Mn-ferrite was the spinel type in $Mn_{x}Fe_{3-x}O_4$ (X=1), the weight loss rate of $Mn_{x}Fe_{3-x}O_4$ were linearly increased up to the $200^{\circ}C$. Ms, Mr and Hc values were decreased with increasing Mn content and heating temperature. When Mn-ferrite was formed by $MnCl_2$reagent electrolysis, Ms values were higher than those formed from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. In Mn-ferrite, which was formed from the sulfuric acid leaching of the wasted manganese dry cell by electrolysis, Ms and Mr values were higher, Hc values were lower than which was formed by $MnSO_4$ reagent electrolysis at $200^{\circ}C\;and\;300^{\circ}C, while the same values at $100^{\circ}C$. The shape of particles was spherical type, the sizes of them were about $0.1{\mu}m$ sub-micron in $MnSO_4$reagent electrolysis, $0.5{\mu}m$ in the sulfuric acid leaching of the wasted manganese dry cell by electrolysis.

• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.28-36
• /
• 2005

A hydrometallurgical process to leach cobalt from the waste cathodic active material, $LiCoO_{2}$, and subsequently to separate it by solvent extraction was developed. The optimum leaching conditions for high recovery of colbalt and lithium were obtained: 2.0 M sulfuric acid, 5 $vol.\%$ hydrogen peroxide, $75^{\circ}C$ leaching temperature, 30 minutes leaching time and an initial pulp density of 100 g/L. The respective leaching efficiencies for Co and Li were $93\%$ and $94.5\%$. About $85\%$ Co was extracted from the sulfuric acid leach liquor containing 44.72 g/L Co and 5.43 g/L Li, using 1.5 M Cyanex272 as an extractant at the initial pH 5.0 and in organic to aqueous phase ratio of 1.6:1 under the single stage extraction conditions. The Co in the raraffinate was completely extracted by 0.5 M Na-Cyanex272 at the inital pH 5.0, and an organic to aqueous phase ratio of 1;1. The cobalt sulfate solution of higher than $99.99\%$ purity could be recovered from waste $LiCoO_{2}$, using a series of hydrometallurgical processes: sulfuric acid leaching of waste $LiCoO_{2}$- solvent extraction of Co by Na-Cyanex 271 - scrubbing of Li by sodium carbonate solution - stripping of Co by sulfuric acid solution.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2004

The extraction of platinum group metals such as Pt, Pd and Rh from spent automobile catalyst has been investigated by leaching in HCl solutions using $HNO_3$ or NaOCl as a oxidant. The effect of type and amount of oxidant, reaction time and pulp density on the extraction of platinum group metals was examined. Platinum group metals were recovered by the cementation method using aluminum as a reducing agent. The extraction ratio was higher when NaOCl was used as a oxidant. The optimum leaching conditions were obtained to be: HCl 8 M, the amount of NaOCl 1.4 mole, leaching temperature $90^{\circ}C$, leaching time 180 minutes, pulp density 400g/L. Under the optimum conditions, the extraction of Pt, Pd and Rh were 96.1%, 93.6% and 77.3%, respectively. With the addition of 2.0g of aluminum which corresponds to 28 equivalent the reduction were 98% for Pt. 98.8% for Pd and 65.3% for Rh, respectively.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.51-58
• /
• 2008

Artificial mattes were prepared with adding pyrite or chalcopyrite as sulfur sources with Cu-Ni-Co-Fe alloy. The major phases identified by X-ray diffraction pattern were $(FeSi)_9S_8$, $CuFeS_2$, FeS, $Co_4S_3$, $Ni_3S_2$ and $Cu_2S$ for both mattes, and the matte prepared by adding chalcopyrite showed the higher peak of $Cu_2S$ due to high content of copper. Under optimum conditions, more than 95% copper, 90% nickel and 90% cobalt were extracted into leaching solution and sulfur concentration in the mattes did not much affect the leaching efficiency of the metals. The increase of the amount of pyrite or chalcopyrite added decreased pH in leaching solution and increased the concentration of iron ion dissolved in the leaching solution and the amount of residue.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.63-67
• /
• 2014

Gallium is an important material and is used by industry of oxide semi-conductor and LED chip. However, the most of the gallium-containing waste resources became outflow abroad and the most of which is imported from oversea by following technical problem and low circulation rate. In this research, the recovery of high purity Gallium metal from Gallium scrap, which containing about 30% of Gallium, was investigated by using hydro-metallurgical process. As pretreatment, the Gallium scrap was pulverized and leached by strong acid such as hydro chloric acid. At the leached solution, Indium was separated as an Indium sponge by substitution reaction and then Gallium and Zinc hydroxide separated and filtrated using strong alkaline solution such as sodium hydroxide by precipitation method. Also, Gallium metal and Zinc metal was recovered by electrowinning method. To make an electrolytic solution, Gallium and Zinc hydroxide was leached by strong alkaline solution. Finally, High purity Gallium metal was recovered by vacuum refining process to remove the Zinc impurity.