• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.47-53
• /
• 2018

Recovery of lactic acid from fermentation broth using chemical precipitation was investigated with various chemicals. Effects of chemical types, mixing speeds, settling duration, and solvent addition were evaluated to improve the recovery rates of lactic acid. Overall, recovery efficiencies increased as the dosage of chemicals increased. Recovery rate of lactic acid by CaO was higher than those of $Ca(OH)_2$ and $CaCO_3$. Recovery of lactic acid increased by 48% under the optimized reaction conditions which included a mixing speed at 180 rpm, a settling duration of 24 h, and addition of ethanol at 25%(v/v). Practical application needs to consider types and concentrations of other organic acids as well as lactic acid. Based upon the results of fluorescence excitation emission matrix (FEEM), size exclusion chromatography (SEC), characteristics of recovered lactic acid were same as that in the fermentation broth.

• Korean Journal of Clinical Pharmacy
• /
• v.13 no.2
• /
• pp.91-96
• /
• 2003

Paclitaxel과 cephalosporines(제 1세대인 ceftezole sodium과 cephradine, 제2세대인 cefamandole sodium과 cefmetazole sodium, 제3세대인 cefoperazone sodium과 cefotaxime sodium 그러고 제4세대인 cefepime hydrochloride)을 $5\%$포도당주사액 그리고 $0.9\%$ 염화나트륨주사액과 함께 Y-Site 장치를 써서 환자에게 주입할 때 paclitaxel의 안정성에 관하여 연구하였다. Paclitaxel 0.3 mg/ml 및 1.2 mg/ml과 cephalosporines 20 mg/m을 각각 1 : 1로 혼합한 후 0, 1, 2, 4, 12시간 시점에서 paclitaxel의 농도를 HPLC로 분석하였다. 방해물질에 의한 분석오차를 줄이기 위해 분석법을 여러 상태에서 확인하였으며, 각 농도에서 3차례씩 실험하였고 각 샘플은 2차례 반복하여 HPLC로 분석하였다. 분석전에 각 시료의 투명도, 색의 변화, 침전상태 및 pH를 검사하였다. Paclitaxel 0.3 mg/ml 및 1.2 mg/ml와 cephalosporines 20 mg/ml를 각각 혼합하였을 때 12시간 동안 안정하였으며, 주사액의 혼탁이나 색의 변화 및 침전은 나타나지 않았으며 pH도 변하지 않았다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.356-359
• /
• 2005

하수를 처리하는 공정에서 해마다 슬러지의 발생량은 증가하고 있으며, 이를 효과적으로 처리하는 것이 매우 중요하다. 따라서, 본 연구는 경제적이면서도 측정이 간편한CST(Cap-illary Suction Time)을 통해 슬러지 의 탈수성 과 적 정 주입량을 산출하는 방법을 연구하였다. 이를 위하여 본 실험의 대상인 도시 하수슬러지에 대하여 함수율 및 pH변화, 무기 및 유기 응집제의 주입량 변화, 그리고 응집제 투입 후 침전된 응집제량을 조사하여 탈수성을 조사하였다. 슬러지의 함수율을 97%, 98%, 99%로 했을 때, CST는 99%일 때가 가장 적은 값으로 나타났다 응집제 주입 후 침전된 슬러지의 생성량은 응집제가 증가됨에 따라 증가하다가, 최적 주입량보다 더 많은 응집제를 주입할 경우에는 그 양이 감소했다. 이는 형성된 응집물의 구조적 특성의 변화를 나타내고 있음을 알 수 있다. 위와 같은 실험 결과를 통해 CST는 수분이내(< Smin)에 슬러지의 탈수성을 신속하게 측정할 수 있는 방법이며 비교적 정확하게 측정할 수 있음을 알 수 있다. 뿐만 아니라 응집제의 최적 주입량 및 응집물의 구조적 특성을 평가하는 데에도 유용하게 사용할 수 있다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.101-109
• /
• 2004

In this study, the solid-liquid separation characteristics of swine wastewater were investigated for the coagulation and dissolved air flotation (DAF). Coagulation characteristics were studied using jar-tester with the different coagulants and dosage amounts. DAF characteristics were also investigated in terms of the different flotation conditions with the raw swine wastewater, pH adjustment only, and adding coagulants. When the raw swine wastewater was coagulated with the only inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > PAC > Alum orderly, and the optimal coagulant dosages were founded as $1,000mg/{\ell}$, $1,500mg/{\ell}$, $1,500mg/{\ell}$, respectively. As the raw swine wastewater was treated with the polymer coagulants, the only cationic polymer coagulant showed an effective coagulation and the optimal dosage of cationic coagulant was founded as $200mg/{\ell}$. When the different dosages of cationic polymer was added to each $500mg/{\ell}$ of the inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > Alum > PAC orderly, and optimal cationic polymer dosages was founded as $25mg/{\ell}$, $25mg/{\ell}$, and $100mg/{\ell}$, respectively. Resulting from the raw swine wastewater experiments using DAF without coagulation, the proper operation conditions of DAF were set to 400% of recycling ratio, 4 atm in air dissolving tank, and under pH 3. But the raw swine wastewater was difficult to successfully operate DAF without pre-coagulation. While the DAF separation after pre-coagulation using inorganic coagulants was not accomplished due to the low intensity of the floc, DAF after pre-coagulation using both the inorganic and cationic polymer coagulants was accomplished very well. Optimal dosage of cationic polymer coagulant in case of $500mg/{\ell}$ Alum dosage was founded as $500mg/{\ell}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.112-112
• /
• 2016

인체접촉시 니켈도금의 알러지 반응을 억제하기 위한 대체 도금기술인 비 시안계 Cu-Sn 합금도금을 개발함에 있어서, 황산구리5수화물과 황산제일주석을 금속염으로 하여 황산 및 계면활성제, 유화제 등을 포함한 각종 유기첨가제를 포함하였고 특히 은백색조의 외관 색상과 안정적인 Cu-Sn 합금전착을 위해 2종의 착화제인 EDTP($C_{14}H_{32}N_2O_4$)와 TEA(Triethanolamine)를 첨가한 비 시안계 Cu-Sn 합금 도금액을 도출하였다. Cu-Sn 합금도금 피막 조성의 균일화를 도모하기 위해서는 합금 도금액중의 Cu와 Sn 금속이온 농도를 일정하게 유지하는 것이 필요하다. 그러나 합금 도금액중 2가 주석이온($Sn^{2+}$)은 수용액중에서 4가 주석이온($Sn^{4+}$)으로 산화됨으로써 도금액 색상이 백탁이 되고 Stannic Hydroxide($Sn(OH)_4$, $SnO_2{\cdot}2H_2O$)이 생성되어 대량의 침전물이 침강하는 문제점이 발생되는 등 시간 경과에 따른 도금액의 경시 변화가 발생되었다. 상기 침전물은 연속여과에 의해 제거 가능하나 합금 도금액중 $Sn^{2+}$ 농도가 지속적으로 감소하게 된다. 이는 합금 도금액중 금속이온 비율이 변동함으로써 합금도금 피막의 조성비를 일정하게 유지하는 것이 곤란해진다. 이에 $Sn^{4+}$ 침전물 생성을 방지하기 위한 산화방지제를 개발하고 또한 산화방지제의 첨가에 따른 도금 피막 외관에 미치는 영향을 평가하여 외관 개선을 위한 광택제를 개발하고자 한다. 본 연구의 결과를 토대로 니켈도금과 동등 이상의 기능 특성을 갖는 비시안계 Cu-Sn 합금도금액을 개발하여 실용화하는 것을 목적으로 하였다.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.3-10
• /
• 2016

The passive treatment was required a large area for the treatment of acid mine drainage (AMD), and pollutants were discharged with mine drainage by the increased flow rate in summer. This study was performed to improve the turbidity and to precipitate the pollutants quickly using coagulants and flocculants in AMD of abandoned mine sites that were difficult to build the passive treatment system. The coagulant PAC (Poly aluminium chloride) and flocculant PAM (Polyacrylamide) were selected to improve turbidity in W mine waters. We also tested the particle size analysis, ICP-OES and/or SEM-EDS for water and sludge samples.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.503-508
• /
• 1997

The extraction and separation methods of protein-bound polysaccharides from the mycelium and culture broth of L. edodes were investigated. The use 2% solution of surface active agent, Triton X-100 was effective for extraction of the protein-bound polysaccharide from the mycelium. The extraction of the protein-bound polysaccharides from mycelium with hot water was achieved by 4 hours extraction at 10$0^{\circ}C$. For the separation and partial purification of the protein bound polysaccharides the column chromatography using DEAE-Cellulose, DEAE-Sephadex and Sephadex proved to be effective.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.220-227
• /
• 1998

Homogeneous precipitation of $Y^{3+}$ with urea has been studied in order to investigate the effect of urea concentration on the preparation of monodispersed colloidal "Yttrium Hydroxycarbonate $(Y(OH)CO_3 \cdot nH_2O)$". As the initial concentration of urea increased, the mean size of colloidal precipitates decreased, and the rate of precipitation of $Y^{3+}$ increased. When the initial concentration of urea was higher than $4.0 \sim 7.0 M$, precipitates obtained were no more monodispersed colloidal particles, but coagulated big particles; and, although the initial concentration of urea increased over 4.0 M, the rate of precipitation did not increased. It is important to decide the proper initial concentration of urea, because excessive urea can cause the environmental problems such as water pollution.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.21-31
• /
• 1998

A study on the acid leaching and precipitation has been conducted to remove arsenic from the closed-mine tailings. HCI and H$_2$SO$_4$were used as the leach liquor of arsenic and the tailing obtained from the Da-Duck Mine, which was already closed several decades ago, was also used as the source of arsenic. The effect of the concentration of acid, leaching time and the slurry density on the leaching efficiency of arsenic has been examined. In addition, pH controls and the addition of sodium sulfide were also attempted to remove the arsenic compound as the precipitation from the leachate. After 1 hr leaching by HCI, 40 to 86% of arsenic was leached out depending on the concentration of acid or the slurry density while 47 to 77% of it was leached out by $H_2$$SO_4$. The leaching of arsenic by both acids was almost accomplished within 10 min. and after that only a slight increase in leaching efficiency was observed with leaching time. When the leach liquor was used repeatedly for the leaching of arsenic, the concentration of arsenic in the leach liquor was found to increase continuously although the leaching efficiency was diminished. As far as the precipitation of arsenic in the leachate was concerned, more than 99% of arsenic could be precipitated through the addition of sodium sulfide as the precipitator while the pH controls resulted in the precipitation of up to 84%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.68.2-68.2
• /
• 2017

인체접촉시 니켈도금의 알러지 반응을 억제하기 위한 대체 도금기술인 비 시안계 Cu-Sn 합금도금을 개발함에 있어서, 황산구리5수화물과 황산제일주석을 금속염으로 하여 황산 및 계면활성제, 유화제 등을 포함한 각종 유기첨가제를 포함하였고 특히 은백색조의 외관 색상과 안정적인 Cu-Sn 합금전착을 위해 2종의 착화제인 EDTP (Ethylenediaminetetrapropanol, $C_{14}H_{32}N_2O_4$)와 TEA (Triethanolamine)를 첨가한 비 시안계 Cu-Sn 합금 도금액을 도출하였다. Cu-Sn 합금도금 피막 조성의 균일화를 도모하기 위해서는 합금 도금액중의 Cu와 Sn 금속이온 농도를 일정하게 유지하는 것이 필요하다. 그러나 합금 도금액 중 2가 주석이온($Sn^{2+}$)은 수용액 중에서 4가 주석이온($Sn^{4+}$)으로 산화됨으로써 도금액 색상이 백탁이 되고 Stannic Hydroxide($Sn(OH)_4$, $SnO_2{\cdot}2H_2O$)이 생성되어 대량의 침전물이 침강하는 문제점이 발생되는 등시간 경과에 따른 도금액의 경시 변화가 발생되었다. 상기 침전물은 연속여과에 의해 제거 가능하나 합금 도금액 중 $Sn^{2+}$ 농도가 지속적으로 감소하게 된다. 이는 합금 도금액 중 금속이온 비율이 변동함으로써 합금도금 피막의 조성비를 일정하게 유지하는 것이 곤란해진다. 이에 $Sn^{4+}$ 침전물 생성을 방지하기 위한 산화방지제를 개발하고 또한 산화방지제의 첨가에 따른 도금 피막 외관에 미치는 영향을 평가하여 외관 개선을 위한 광택제를 개발하고자 한다. 본 연구의 결과를 토대로 니켈도금과 동등 이상의 기능 특성을 갖는 비 시안계 Cu-Sn 합금도금액을 개발하여 실용화하는 것을 목적으로 하였다.