• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.357-362
• /
• 2011

It has been often reported that a water-jet propelled high speed vessel lost the course keeping ability in seaway. In this study, model tests of a high speed vessel were performed to measure the running attitude and to check the course keeping ability. The model ship may lose the course keeping ability due to bad running attitudes such as bow drop. So model tests were carried out to improve the running attitude by changing the position of longitudinal center of gravity and using appendages at the bow and the stern of a model. The position of lateral center of pressure moved toward stern and the course keeping ability was improved by modifying the transom wedge angle.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.38-46
• /
• 2021

In the era of the 4th Industrial Revolution, the interest in autonomous ship technology is increasing as high-tech technologies are being increasingly utilized throughout the industry. Therefore, we conducted a basic study on autonomous ships. In particular, a passenger ship model was produced and an autonomous navigation system was established by applying the ardupilot used for drones. The possibility of automatic control of the autonomous ship operations was confirmed by executing various voyage plans using the built model ship. In the performance test for maintaining the course the model ship could not follow the designated course straight and sailed up to 5.4 m away from the course while navigating in a zigzag (S-shape); however, after the parameters were modified, the deviation distance was reduced to a maximum of 1.8 m. In the turning performance test, the maximum diameter of the turning sphere was found to be approximately 9.3 m, but no significant change could be confirmed even after the parameters were modified. However, the results of our tests on slowing down the ship before arriving at the WP confirmed that the diameter of the turning sphere was reduced to a maximum of approximately 3.2 m. In order to evaluate the stopping performance, the last scheduled stopping position of all experiments was compared with the actual stopping position of the model ship and it was confirmed that the model ship stopped at a point at least 0.4 m and a maximum of 6.2 m away from the stopping position. In the future, improvement of course stability, turning performance, and stopping performance is required through modification and supplementation of various parameters. Moreover, a study on automatic berthing of the model ship through automatic control is planned.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.37
• /
• pp.59-76
• /
• 2014

부선은 타 선박에 비해 운항조건 등의 특성상 많은 어려움과 위험에 노출된 채 해상운송 업무를 수행하고 있으며, 예부선 해양사고는 일반 선박보다 40%이상 높게 나타나고 있다. 본 연구는 부선의 안전운항에 필요한 정량적이고 객관적인 정보를 제공하기 위해 실무에서 가장 많이 사용되고 있는 선수 형상을 지닌 부선을 대상으로, skeg와 bridle이 부선의 회두운동에 미치는 영향 조사를 위한 수조실험을 통해 부선의 동적 거동에 의한 예인장력의 변동을 측정하고, skeg가 선수 형상이 다른 부선의 침로안정성에 미치는 영향을 분석 검증하여 예부선의 안전예항 방안을 도출하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.43-47
• /
• 2008

In order to investigate the hydrodynamic interaction between the tug-barge and bank or ship which is crossing to the opposite direction, we have executed the towing simulation of tug-barge transportation. Heading of barge, yaw moment and lateral force of tug boat are obtained by this simulation. We have analyzed the characteristics of results and propose the safety towing method for tug-barge operation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2008

The ship's maneuverability is the important factor to avoid ship's collisions. The ship's maneuverability is usually measured in a deep water, and the turning ability is decreased and the course stability is improved in a shallow water. The variation of the turning ability could cause the risk of collision. In this paper, we proposes application technique of Variable Safe-Guard Ring to consider the shallow water effect and to be simple to estimate the grade of collision risk simultaneously. Through the mathematical simulation, the availability of new method was varified. Therefore this method is expected enough to support a maneuver for collision avoidance.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.18-22
• /
• 1999

One of the problem areas in designing a barge is its resistance and corese stability when it is towed by a tugboat. In this paper, as a part of design of a incinerating vessel, the results of some experimental studies on the effect of various kinds of anti-yawing skegs to the course keeping stability and on the additional resistance caused by them were summarized.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.27-32
• /
• 2011

Recently, a ship-shaped barge has been developed to improve the resistance performance, as well as course-keeping capability. However, the stern of the barge is still similar to a box shape, and the vortex generated at the side of the barge creates drag and yaw instability. In order to solve this problem, stern skegs are normally used. The present paper deals with the correlation between the size of the stern skegs and the barge dimensions and hull coefficient. A stern skeg was designed to prevent yaw instability and minimize any additional resistance. The resistance test and course keeping test were performed in the towing tank at Pusan National University. To determine the correlation parameters between the designed stern skeg size and barge dimensions, a parametric study was also performed. Based on the experimental data from five barges, the optimum skeg dimensions were successfully derived. It is expected that the validation of the present study will be carried out by further experiments and computational comparisons in the near future.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.95-99
• /
• 1997

In these days, the pollution of marine environment near island at Korean coastal zone caused by the trash human waste and livestocks excreata become intensified. One of the most economic and efficient way to prevent this pollution problem is to set up island circulating incineration system. In this paper, the result of feasibility study on the application of turtle boat hull form to the incinerating vessel has been summarized especially for the resistance and course keeping point of view.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.100-106
• /
• 1997

Despite various devices have been developed and applied to stabilize the yaw motion, the superiority of twin skeg over other equi-functioned appendages has been recognized so far. In many cases, these skegs were installed with insufficient study and analysis for design, and this leads to the worse performance of their resistance and course keeping than required. Experimental studies on the effect of various kinds of anti-yawing skegs to the course keeping stability and on the additional resistance caused by them were carried out in the circulating water channel(CWC) at Chosun University(CU). Course keeping stability tests for four different size of skegs, resistance tests for three different shapes of skeg(including deformed skegs) were performed systematically. And the effect of angle of skegs on resistance was studied at the final stage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.552-557
• /
• 2015

A numerical simulation studies were performed to investigate a manoeuvring characteristics as function of stern hull form with the mathematical model. In order to consider the effect of the stern hull form and obtain the manoeuvring characteristics, a parameter($C_{wa}$) which is aft. water plane area coefficient is modified. Because modifying $C_{wa}$(${\pm}2%$) means that the stern hull form is modified to V-type or U-type, the numerical simulation was performed with this modified $C_{wa}$. A changing trend for the manoeuvring characteristics not only in deep water but also in shallow water such as directional stability, turning and zig-zag was investigated and presented as the results. Present study showed that the manoeuvrability in shallow water largely changed when the draught and water depth ratio(=d/H) become 0.5, and the stern hull form can affect to the manoeuvrability of a vessel navigating in restricted water depth. In addition, it showed that approaching the stern hull to U-type makes the advance and tactical diameter of turning motion large and the overshoot angle of zig-zag motions small. Otherwise, it showed approaching the stern hull form to V-type makes the advance and tactical diameter of turning motion small and the overshoot angle of zig-zag motions large in the present study.