• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.191-197
• /
• 2016

The shaft system of a vessel becomes stiffer because of larger engine power, whereas the hull structure becomes more flexible because of scantling optimization conducted by using high-tensile thick steel plates. The draught-dependent deformation of the hull affects each bearing offset and reaction force comprising the subsequent shaft system. This is the reason that more sophisticated shaft alignments are required. In this study, an FE analysis performed under the expected operating conditions of two (2) vessels, as maximum draught change and to analyze the shaft alignment using the relative bearing offset change, which was derived from an FE analysis of the 50,000 DWT oil/chemical tanker, which has become an eco-friendly vessel in recent years. Based on this, the influence of the hull deflection on the bearing offset was reviewed against results for shaft alignment conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.62-68
• /
• 2010

The requirement of high efficiency and low emission for marine diesel engines are being enforced because of air pollution and climate change on the earth. In connection with these, many new technologies are considered. But they are mainly for new building ship. It is necessary to be concerned about the improvement of engine performance for existing ship. In this paper, the simulation program for performance of marine two-stroke diesel engine was developed to predict the deteriorating performance according to elapsed time for existing ship. The result was compared with the result of the program named TOP-CODE which was used by engine maker and checked to be shown good agreement between them.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.21-21
• /
• 2012

수송용 산업의 하나인 국내 조선업계는 2008년 말 이후 세계 조선경기 불황 속에서도 2009년 451억달러, 2010년 491억달러의 사상최대 수출액을 달성한 바가 있고 세계 조선사 순위에서는 1위에서 5위까지 한국 조선소 등이 우위를 차지하고 있다. 그러나 개별 기업 경쟁력은 우위에 서있지만 중국과의 격차가 많이 좁혀지고 있어 안심할 수 없는 상황이다. 특히 최근에는 탄소배출량이 적은 친환경 선박의 제조가 선박업계 전반의 화두로 대두되고 있다. 이를 위해 다양한 시도가 시도되고 있는데 그중에 하나가 선박의 경량화이다. 금속외장 전선은 선박 무게의 10~13%를 차지하고 있고 전체 사용 전선의 30~40%를 차지하고 있어 선박에서의 금속외장 전선의 무게를 줄이기 위한 연구가 필요한 실정이다. 또한 조선산업 뿐만 아니라 자동차 분야에서도 금속 외장전선이 많이 사용되고 있으며, 자동차의 연비 향상을 위한 경량화 연구가 더욱 절실한 상황이다. 본 연구에서는 수송용으로 사용되는 전선의 금속외장을 경량 고강도 섬유를 활용한 하이브리드 wire로 대체하기 위한 편조 기술 및 편조 장치를 개발하기 위한 설계 및 기초연구를 수행하였다. 초경량 고강도 섬유 Armor의 제조기술 및 최적 공정 개발을 위한 연구로서 경쟁사 샘플에 대한 분석을 실시하였고, 사용된 섬유의 성분 분석 및 물성시험을 수행하였다. 또한 원형직기 개발을 위한 구조부 설계를 위해 ANSYS해석을 수행하고 저신율 고강도인 아라미드의 이징모션 시스템 개발을 위한 연구를 수행하였으며 개구 형성방법을 설계하였다. 그리고 초경량 고강도 hybrid 케이블 아라미드 편조 표면 및 내부 가교에 의한 가공 기술을 연구하였다. 아라미드 섬유의 발수성 향상을 위한 코팅재료 선정을 위한 연구를 수행하였고, 자외선 경화공정에서 조건별 데이터를 정립하여 솔루션을 제공하고자 한다.

• 기계와재료
• /
• v.24 no.2
• /
• pp.38-46
• /
• 2012

인구의 증가와 급속한 산업화 그리고 편안함을 추구하고자 하는 문명의 이기로 인한 에너지 사용량 증가는 환경오염을 가속화시키는 문제를 유발하고 있어 전 세계적으로 심각한 사회문제로 대두되고 있다. 이에 반해 삶의 질의 향상에 따라 보다 쾌적한 환경에 대한 욕구와 인식의 변화로 환경보호에 대한 관심이 증가하는 추세이며, 이에 따라 각 국의 환경규제는 날로 강화되고 있다. 이러한 환경문제를 해결하기 위한 국제협력이 활발해지면서 무역과 연계된 국제 환경규제가 가속화되고 있으며, 환경선진국은 이러한 환경규제를 무역장벽으로 이용하고 있어 국가의 대외경쟁력에도 직 간접적으로 영향을 미치고 있다. 환경오염물질 중 질소산화물(NOx), 황산화물(SOx), 일산화탄소(CO), 이산화탄소($CO_2$) 및 휘발성유기화합물(VOCs), 다이옥신 그리고 입자상물질(PM)과 같은 대기오염물질은 대기 중으로 쉽게 확산되는 특성에 의해 인접한 지역까지 영향을 미치기 때문에 국제적인 규제대상의 초점이 되고 있으며, 경제협력개발기구(OECD, Organization for Economic Cooperation and Development), 유엔산하 국제해사기구(IMO, International Maritime Organization) 및 국제연소기구협회(CIMAC, International Council on Combustion engines)등 여러 국제기구를 중심으로 각종 규제수단을 개발하여 적용하고 있다. 특히, 국제해사기구(IMO)에서는 선박에서 발생되는 오염물질 등에 대한 규제강화를 위하여 새로운 국제해양오염방지협약(MARPOL)을 채택, 발효하여 그 규제 범위를 넓혀감에 따라 선박에 대한 각종 환경규제가 대폭 강화되고 있어 친환경 선박 및 관련 기술 개발이 활발히 진행 중에 있다. 이 글에서는 선박에서 배출되는 대기오염물질 중 그 자체로도 인체에 유해하며, 산성비, 광화학스모그 등 다양한 환경문제를 유발시키는 대표적인 물질인 질소산화물(NOx)과 질소산화물 배출규제에 대한 대응기술인 선택적촉매환원법(SCR, Selective Catalytic Reduction)과 SCR 탈질시스템에 사용되는 SCR 촉매에 대해 소개하고자 한다.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.349-355
• /
• 2012

In this study, for the purpose of reduction of $CO_2$ gas emission and to increase recovery of waste heat from ships, the ORC(Organic Rankine Cycle) is investigated and offered for the conversion of temperature heat to electricity from waste heat energy from ships. Simulation is performed with waste heat from the exhaust gasse which is relatively high temperature and cooling sea water which is relatively low temperature from ships. The result shows that 1,000kW power generation is available from exhaust gas and 600kW power generation is available from sea water cooling system. Different fluid is used for simulation of the ORC system with variable temperature and flow condition and efficiency of system and output power is compared.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.856-866
• /
• 2021

The increasing international awareness regarding air pollutant reduction has resulted in increasing demand for eco-friendly ships; hence, electric ships are being actively developed by various countries. Presently, studies on electric ships are mainly focused on electric propulsion systems and electric motors. However, from the ship perspective, there are no studies on conceptual designs for coastal car ferries powered by removable power supply systems. In the present study, the main research consideration is regarding the conceptual design of a fully electrified car ferry using a battery-based removable system as the main power source. By analyzing the dimensions of more than 100 domestic coastal car ferries, the main criteria satisfying the requirements for developing a suitable vessel were derived, and a study on intact/damage stability was conducted considering the application of a removable battery truck. Further analyses of the problems concerning the conceptual design were also performed to derive solutions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

Many researches have been carried out consistently for the green ship owing to its economic increasement, efficiency and convenience. One of them is an electronic controlled marine diesel engine. However, we are suffered from dissemination of above engine, due to its anxiety about safety and reliability. In order to solve these problems in this study, emission characteristics test of main propulsive two-stroke diesel engine, equipped both electronic control and cam drive fuel injection systems, has been performed and evaluated under the various load conditions. From the test results, we have confirmed that exhaust gas emission characteristics of the electronic control system is similar to the cam drive system in eco-mode operation, but NOx in emission mode has been decreased 100ppm or more in full load condition. HC emission from the electronic control system is decreased 10~20ppm at 50% load, and 35~40ppm at 25% load in comparison to cam drive system. In fuel consumption, it is considered that 7g/kWh is decreased than the value of cam drive system at 700bar of injection pressure, which is 200bar higher than cam drive system.

• Plant Journal
• /
• v.16 no.3
• /
• pp.37-41
• /
• 2020

Lately old LNG carriers increased and ship price is getting down. So Interest for reuse and modification of used LNG carriers is growing. Also the needs for replacement of old power plant is increasing. Additionally eco friendly fuel such as LNG become attractive. Consequently gas power plant is getting much more popular than before. So in this research planning, we consider the floating power plant by modifying LNG carriers. This plant has the various function including storage, power plant and bunkering fuction etc. Through this multifunctional plant, we are ready for the old power plant shutdown and energy crisis in the future when we can supply the urgent mobile floating power plant quickly in time.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.194-194
• /
• 2018

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.103-108
• /
• 2015

Recent global warming has been recognized as the world economy development from fossil fuel use is the culprit. This study was reduce the fossil fuel has been developed in a number of alternative energy, As a fuel that can be produced in our country is a biofuel. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel. A lot of research is progressing about the conversion of diesel biofuel as renewable clean energy. In this experiment were remodel the institution that has been used in fishing engine again produced an experimental apparatus were installed directly, were studied using various bio fuel like to help the economically and environmentally sound operation of the vessel. rapeseed oil, soybean oil, comprehensively analyzing the results the effects of the exhaust emission characteristics of the waste rapeseed oil is available in a marine engine with similar physical and chemical components of the fuel, and the fuel consumption ratio, NOx is slightly increased, but soot was confirmed a tendency to decrease much.