Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.190-190
/
2011
일반적으로 TiO2와 WO3는 광촉매 작용으로 인하여 살균력을 보이며, 친수성으로 인해 자가 세정 능력을 가져 유리 및 건축자재의 표면처리, 전자제품의 마감처리 용도로 많이 사용하고 있다. 현재 Sol-gel, CVD, Sputter, Spin-coating 방법 등으로 많은 연구가 진행되어 오고 있다. 이에 본 실험에서는 박막의 두께를 균일하게 만들 수 있는 RF-magnetron sputtering 방법을 이용하여 표면 경도와 부착력이 우수한 TiO2에 열적 특성과 화학적 특성이 안정한 WO3를 Double Layer 방식으로 증착하여 박막을 제작하였다. 광학적 특성을 알아 본 결과 가시광 영역에서 TiO2 / WO3 Double Layer 박막이 80% 이상의 높은 투과율을 나타내었으며, 박막의 표면을 확인 한 결과 TiO2 / WO3 Double Layer 박막이 더 조밀한 표면을 보였다. 또한 접촉각을 측정을 통하여 TiO2박막보다 TiO2 / WO3 double layer박막이 낮은 접촉각을 나타내었다. 이는 TiO2 표면은 소수성이나 WO3로 인해 광촉매 기능이 향상되어 공기 중의 물 분자가 해리 흡착되면서 친수성이 향상되는 것으로 사료된다. 이러한 박막은 건물의 외벽이나 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재로 활용 가치가 높을 것으로 예상된다.
Lee, Se-Min;Byun, Young-Jin;Kim, Jin-Ho;Kim, Sung Soo
Membrane Journal
/
v.23
no.3
/
pp.220-225
/
2013
Hydrophilic monomers were polymerized for lamination on polyvinylidene fluoride (PVDF) membrane surface for hydrophilization of the membranes. Hydrophilization reduced the contact angle from $95^{\circ}$ to $55^{\circ}$ and enhanced the water flux by 10 times while it reduced the bovine serum albumin (BSA) adsorption amount to 1/4 level. Thermal polymerization process was optimized by examining several operation parameters. Dimethyl oxobuthyl acrylamide (DOAA) showed the best effect due to its better hydrophilicity than others. Increase of amount of monomer enhanced the performance until the optimum concentration of 30 wt%, beyond which excess amount of monomer resulted in homopolymerization to deteriorate the performance. Azobis (isobutyronitrile)(AIBN) initiator has greater activation temperature range than benzoyl peroxide (BPO) and it showed better hydrophilation performance. Two stage lamination process, application of initiator followed by monomer addition, was more effective than one stage process, addition of initiator and monomer at once, which still reduced the contact angle but also reduced the water flux by pore blocking phenomena.
Surface of polyethylene film was modified by ion assisted reaction in which ion beam is irradiated on polymer in reactive gas environments. Ion (argon and oxygen) beam energy was 1 keV, doses were varied from $1{\times}10^{14}$ to $1{\times}10^{17}$ inons/ $\textrm{cm}^2$, and amount of blowing oxygen from 0 to 4 sccm(ml/min). Wettability was measured by water contact angle measurement, and the surface functionality was analyzed by x-ray photoelectron spectroscopy. The contact angles of water to polyethylene modified by oxygen ion beam only decrease from 95 to degrees, and surface energy was not changed much. The contact angles remarkably decrease to 28 degrees and surface energy increase to 67 erg/ $\textrm{cm}^2$ when the films were modified by argon ion with various ion doses with blowing oxygen gases near the polyethylene surface. Improvement of wettability and surface energy are mainly due to the new functional group formation such as C-O or C=O, which are known as hydrophilic groups from the XPS analysis, and the assisted reaction is very effective to attach oxygen atoms to form functional groups on C-C bond chains of polyethylene.
현재 많은 연구들이 작은 크기에 여러 공정을 집적시킬 수 있는 장점을 가진 마이크로 장치의 개발과 활용에 집중되고 었다. 마이크로 장치에서 가장 중요한 것은 미세 유동의 효율적인 제어이다. 본 연구에서는 마이크로 장치에 직접 적용 가능한 표면 개질 된 마이크로 채널의 유동에 대하여 고려하였다. 표면 개질(surface treatment)은 물리적, 화학적인 작용을 통해서 채널 내부 표면의 습윤성을 변화시켜 유동을 제어하는 방법이다. 친수성(glass)을 가지는 마이크로 채널 내부의 일부를 소수성(teflon)으로 개질 후, 고속카메라를 이용하여 채널 내부를 흐르는 유체의 유동 경계면 변화를 분석하였다. 또한 유동 해석을 위한 상용 코드(CFD-ACE)를 이용하여 유동에 대한 수치 해석을 진행하여 가시화된 실험 결과와 비교 분석하였다. 실험 결과와 수치 해석 결과를 통해, 친수성과 소수성 표면 배열에 따른 일시적인 유동 변화를 관찰하였다. 본 연구 결과를 통해 마이크로 채널 유동의 최적화 상태를 찾을 수 있으며, 보다 용이한 미세 유동 제어가 가능하다.
Choo Byoung-Kwon;Choi Jung-Su;Kim Gun-Jeong;Lee Sun-Hee;Park Kyu-Cang;Jang Jin
Journal of the Korean Vacuum Society
/
v.15
no.4
/
pp.354-359
/
2006
Recently, the interest in lithography without photo exposure has been increased compare to the conventional photolithography in nano meter and micrometer size patterning area. We studied a self aligned dipping of Ag solution through micro contact printing (${\mu}-CP$) with octadecyltrichlorosilane (OTS) treated polydimethylsiloxane (PDMS) soft mold. The OTS monolayer on the patterned PDMS was formed by dipping it into OTS solution. We transferred the OTS monolayer from PDMS mold to the glass. The OTS monolayer changed the surface energy from hydrophilic surface to hydrophobic surface, And then we made self aligned Ag solution patterns just after dipping the substrate, using adhesion difference of Ag solution between OTS treated hydrophobic area and non-OTS treated hydrophilic area. We finally get the Ag patterns through only dip-coating after the ${\mu}-CP$ process. And we observed surface energies on the glass substrate through the contact angle measurements as time goes on.
The formation of hydrophilic surface based on polymers has received great attention due to the anti-adhesion of bacteria on solid substrates. Anti-adhesion coatings are aimed at suppressing the initial step of biofilm formation via non-cytotoxic mechanisms, and surfaces applied hydrophilic or ionic polymers showed the anti-adhesion effect for bioentities, such as proteins and bacteria. This is attributed to the formation of surface barrier from hydration layers, repulsions and osmotic stresses from polymer brushes, and electrostatic interactions between ionic polymers and cell surfaces. The antifouling polymer coating is usually fabricated by the grafting method through the bonding with functional groups on surfaces and the deposition method utilizing biomimetic anchors. This mini-review is a summary of representative antifouling polymers, coating strategies, and antibacterial efficacy. Furthermore, we will discuss consideration on the large area surface coating for application to public facilities and industry.
In this study, the petroleum sulfonate(PS) was synthesized from pyolyzed fuel oil by sulfonation reaction with sulfuric acid. The PS synthesized had surfactant behaviors relating to the interfacial properties such as surface tension, surface adsorption, and wetting, etc. These interfacial properties were affected by the sulfonation ratio in the synthesis. As the sulfonation ratio increased, the surface tension of the PS aqueous solution decreased. However, when the ratio was too high, the surface tension was increased due to the extremely higher value of hydrophilicity of PS. At the optimum sulfonation ratio, the PS had a good wettability on the cement particles and a good fluidity of the cement mortar with a high adsorption.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.85.2-85.2
/
2018
금속 나노구조체에서의 localized surface plasmon resonance와 surface-enhanced Raman scattering 현상은 센서를 비롯한 다양한 응용분야를 가지고 있다. 나노구조체 array 형성을 위한 대표적인 top-down 방식인 e-beam lithography 공정은 제조비용이 매우 높고 대량생산 및 대면적화에도 한계가 있기에 polystyrene(PS) bead의 self-assembly를 이용한 nanosphere lithography와 같은 bottom-up 방식이 폭넓게 연구되고 있다. Closed-packing된 PS bead의 monolayer를 얻기 위해서는 기판의 친수성 처리가 필요한데, 기존의 많은 연구에서는 기판의 표면개질에 화학적 공정을 이용하고 있다. 하지만 이는 기판 선택의 자유도를 떨어뜨리는 원인이 된다. 금속이나 실리콘 기판에서는 산성 용액을 이용한 화학적 처리방법을 적용할 수 있지만 SU-8과 같은 감광액 및 폴리머 기판에서는 산에 대한 내구성이 떨어져 화학적 공정의 도입이 불가능 하기 때문이다. 본 연구에서는 이러한 한계점을 극복하기 위해 $UV-O_3$ 공정으로 친수성 처리된 다양한 기판에서 spin coating을 통한 PS monolayer를 제조하였는데, UV 램프의 에너지 조절을 통해 기판에 붙어있는 유기물들을 효과적으로 제거할 수 있었고 $O_3$ 생성 및 분해 과정에서 기판 표면에 친수성 화학 작용기를 생성시킬 수 있었다. 제조된 PS layer를 mask로 사용하여 Ag, Al, Au 등 다양한 나노구조체 array를 형성하여 array 주기에 따른 플라즈몬 공명 특성을 분석하였다. 레이저 조사로 나노구조체의 형상을 변화시킴으로써 동일한 물질과 주기를 가진 array에서도 플라즈몬 특성의 변조가 가능함을 확인하였는데, 이는 금속 나노구조체의 응용측면에서 매우 고무적인 발견이다.
Polystyrene foam (styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contactangle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from $84^{\circ}$ to $18{\sim}19^{\circ}$. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.