• Journal of Chest Surgery
• /
• v.30 no.8
• /
• pp.819-822
• /
• 1997

Aortic valve replacement with aortic allograft has been considered a treatment of choice for aortic valve disease secondary to bacterial endocarditis because of its good homodynamic performance and higher resistance to infection. The aortic root replacement technique might be superior to the subcoronary allograft implantation technique with regard to aortic regurgitation. A 46 yea,rs old male patient had acute aortic regurgitation with progressing heart failure secondary to acute bacterial endocarditis. The patient underwent emergent aortic root replacement using 20 mm aortic allograft. At operation, right coronary cusp perforation and heavy calcification of commissure between right and left coronary cusp were observed. The patient recovered well and postoperative echocardiography demonstrated no aortic regurgitation. Inflammatory signs were subsided after 8 weeks of antibiotics therapy. Medically uncontrolled acute bacterial endocarditis was treated successfully by aortic root replacement using aortic homograft.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.366-373
• /
• 1984

Methanolysis rates of benzylbenzenesulfonates, substituted both on the substrate (Y) and on the leaving group (Z), were determined in MeOH-MeCN mixtures. The results showed that the reaction proceeds via the dissociative $S_N2$ mechanism, in which bond breaking proceeds in greater degree compared to bond formation at the transition state(TS). Multiple Hammett correlation analysis showed that the cross term, ${\rho}_{YZ}$, is very small and hence the cross interaction of two substituents, Y and Z, at the TS is not important, supporting the dissociative $S_N2 $ type mechanism. While transition state variations predicted by the quantum mechanical model is shown to agree in general with the experimental results, those predicted by the potential energy surface model failed to account for the leaving group effect properly.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2008

UHPC has high performance, high strength and excellent mechanical properties. Moreover UHPC(Ultra High Performance Cementitious Composite) has advantage to reduce cross section under the same load compared with other kinds of concrete. But silica fume which is imported from foreign country has a abundant portion in UHPC mixture in comparison with normal concrete. This is one of the main reason to raise the construction cost. Superior mechanical properties of UHPC due to the optimum filling composition can be changed by replacing the very fine ingredient. The purpose of this research is to grasp the characteristic of UHPC which silica fume and silica flour is replaced with limestone powder. This experiment can be divided into three classes according to the kinds of replacement. The compressive strength and flow of all types were measured and microstructure and hydration phenomena for comparing RPC were analyzed by SEM, XRD, NMR method. As a result, the replacement can be considered to be effective by for the decrease of the UHPC structure construction cost and improvement of the fresh UHPC.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.6
• /
• pp.37-46
• /
• 2006

It is known to be hard to apply cryptographic one-way functions to the recognition system using bio-information directly. As one of the solutions about that problem there is a permutation transformation scheme. However, they did not show my algorithmic behavior or any performance analysis of the transformation by experiment. In this paper, by showing the recognition ratio of the transformed scheme by experiment, we prove that that scheme is sound. Also, we adopt their transformation to LDA(Linear Discriminant Analysis) to show the experimental results. In the negative side, we introduce a new type of attack against the permutation transformation schemes. finally, we briefly mention a generalization of the permutation transformation for countermeasure of the attack at the end of this paper.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.19-27
• /
• 2009

In order to investigate anti-freeze process of precast concrete L-type retaining walls in cold regions, test walls were installed in the campus of Kitami Institute of Technology (KIT, Hokkaido, Japan). The wall consists of following three sections, i) back filled with frost susceptible clay soil, ii) using thermal insulation material, and back filled with frost susceptible soil, iii) back filled with frost-unsusceptible soil. The freezing front distribution and ground temperature within the backfill were observed and deflections of the walls were measured over three freeze-thaw seasons. Some understanding of the mechanisms of the build-up of frost heave pressure was gained, and the effectiveness of replacement method was observed. A simulation was performed to predict the shape of the freezing front in the backfill behind L-type walls with various cross sections. These findings were employed to propose a method for determining the appropriate zone to be replaced with frost unsusceptible backfill material in cold regions.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.377-383
• /
• 2019

The biomechanics study of the hip is aims to understand and explore the dynamic principles of weight transfer through the hip joint. This basic science knowledge can be applied in a variety of areas, including degenerative joint diseases and hip replacement arthroplasty. In particular, understanding of the biomechanics of the hip has led to the development of materials, design and fixation of implants, and it can be applied in various areas, such as the selection of surgical methods and the location of the implant. Moreover, it is essential to have good knowledge of the biomechanics of the hip to achieve better clinical results for patients. Therefore, this paper introduces the basic knowledge and biomechanical characteristics of a normal hip and hip replacement arthroplasty, which are needed to approach the biomechanics of the hip.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.560-567
• /
• 2023

This study is part of the research on fire-resistant materials to prepare for changing fire behavior, oyster shell and egg shell, which are natural calcium carbonate materials, were substituted as fine aggregates. The purpose of this study was to evaluate the strength and fire resistance performance according to the substitution rate, and to provide data for use as fire resistance material. Oyster shells and egg shells were substituted with 10~50 % of the fine aggregate, respectively, and tested for strength and Simplified heating according to the KS test method. Although the strength of OS was measured to be higher than that of ES, the backside temperature was also measured to be higher. As a result, it is recommended to use fireproof boards with OS where strength performance is required, such as explosive fires, Where high fire resistance performance is required, such as high-temperature fires over 1000 ℃, fireproof boards with ES can be selected according to the application.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.102-109
• /
• 2024

In order to use limestone powder as a material for concrete, the mechanical and durability characteristics of cement matrices manufactured by varying the substitution rate were evaluated. In general, limestone powder did not contribute to the cement hydration reaction, so as a result of the compressive strength test of cement mortar using it, the compressive strength decreased as the substitution rate increased. However, as a result of evaluating the durability performance of cement mortar using limestone powder, such as chloride ion penetration resistance, carbonation resistance, and chemical attack resistance, small particles of limestone powder showed superior results compared to the unsubstituted control mortar due to the micro-filler effect of filling the fine pores inside the cement matrix. Therefore, limestone powder is expected to be used as an effective method for improving the durability of concrete. In this study, the durability was evaluated by changing the mixing amount of limestone powder to 0 %, 5 %, 10 %, and 15 %, but it is judged that it is necessary to study in more detail the effect on the durability by changing the end and mixing amount of limestone powder to various levels in the future.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.253-260
• /
• 2021

Purpose: The least constrained prosthesis is generally recommended in primary total knee arthroplasty (TKA). Nevertheless, a varus/valgus constrained (VVC) prosthesis should be implanted when a semi-constrained prosthesis is not good for adequate stability, especially in the coronal plane. In domestic situations, however, the VVC prosthesis could not always be prepared for every primary TKA case. Therefore, it is sometimes impractical to use a VVC prosthesis for unsual unstable situations. This study provides information for preparing VVC prostheses in the preoperative planning of primary TKA through an analysis of primary VVC TKA cases. Materials and Methods: This study reviewed 1,797 primary TKAs, performed between May 2003 and February 2016. The reasons for requiring VVC prosthesis and the preoperative conditions in 29 TKAs that underwent primary TKA with a VVC prosthesis were analyzed retrospectively. Results: In primary TKA, 29 cases (1.6%) in 27 patients (6 male and 21 female) used VVC prosthesis. Two patients underwent a VVC prosthesis on both knees. The mean age of the patients was 63.4 years old (34-79 years). The mean flexion contracture was 16.2° (-20°-90°), and the mean angle of great flexion was 111.7° (35°-145°). The situations requiring a VVC prosthesis were severe valgus deformity in 10 knees, knee stiffness requiring extensive soft tissue release in 10 knees, previously injured collateral ligaments in five knees, and distal femoral bone defect due to avascular necrosis in four knees. The mean tibiofemoral angle was 25.7° (21°-43°) in 10 cases with a valgus deformity. The mean flexion contracture was 37.5° (20°-90°), and the mean range of motion was 48.5° (10°-70°) in 10 cases with knee stiffness. Conclusion: The preparation of VVC prosthesis is recommended, even for primary TKA in cases of severe valgus deformity (tibiofemoral angle>20°), stiff knee (the range of motion: less than 70° with more than 20° flexion contracture), and the cases with a previous collateral ligament injury. This information will help in the preparation of adequate TKA prostheses for unusual unstable situations.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.652-657
• /
• 2015

To produce mulberry-leaf tea abundant in ${\gamma}$-aminobutyric acid (GABA), mulberry leaves were subjected to two distinct anaerobic conditions ($N_2$ and vacuum) for 12 h before the manufacturing process. Subsequently, changes in the GABA content as well as that of other components were measured. In anaerobically treated mulberry leaves, GABA content markedly increased by 436-472% compared with the control, while the glutamic acid content decreased. However, few changes were observed in the contents of the general components (moisture, carbohydrate, lipid, protein, and ash) and water-soluble solids. Free sugar, catechin, and total phenol content decreased after anaerobic treatment. However, the sensory test scores were not different between the control and anaerobically-treated samples. Consequently, tea products, manufactured post nitrogen gas or vacuum treatment of leaves after harvest, showed functional properties without sensory loss.