• Tunnel and Underground Space
• /
• v.18 no.5
• /
• pp.375-385
• /
• 2008

Hydraulic analysis in a dam that has a single outlet of water can be made through a simple comparison between the total precipitation and the volume of discharged water. In case of tailing dams this estimation could yield an error because several drainage facilities are worked independently as well as simultaneously. In this research, a capability of the drainage system in the tailing dam of the old Sangdong Mine was analysed by the means of GIS technic. As a result of this study, it was expected that in the normal working condition of the whole drainage system, the flooding of water over the dam should not occur in spite of the consecutive precipitation during one hour with an intensity of 80.31 mm/hr, a probable precipitation within 100 years. It was, however, revealed that, if the drainage system did not work completely, the water could flood over the dam when the total precipitation reached 251.1 mm.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.501-510
• /
• 2003

Several geophysical surveys(electrical resistivity, electromagnetic, seismic refraction, CPR) were conducted to primarily investigate the gallery and the geomembrane at an abandoned mine(Imcheon mine). The subsurface structure mapped from seismic refraction survey mainly consists of three velocity layers(>1000 m/s, 1000∼2000 m/s,＜2000 m/s). Top of the bedrock, whose velocities exceed 2000 m/s, appears to be at depth of 7.5∼10m. Higher resistivities (of ten thousands-hundred of thousands ohm-m) are interpreted to be associated with a open(cavities) gallery. The events at depth of approximately 0.5∼0.7m in GPR sections are probably caused by high-density-poly-ethylene geomembrane. Taking into consideration of the differences in the spatial resolution between georadar and electrical surveys, the events of geomembrane correspond to the top of the high resistivities at depth of about 2m. The segments, characterized with the higher conductivities in the electromagnetic data and the lower resistivities in the electrical resistivity data, are probably associated with surface water or tear zone of geomembrane.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.37-40
• /
• 2007

Although masonry buildings fell into disfavour in the 1990's because of factors such ac bricklayers' high labor costs, bad reputation of poorly constructed masonry, masonry face wall is still preferred in korea as well as in other countries for its decorative value. Recently may problems with masonry face wall with opening have been reported, including cracks, deflection, swelling and even wall collapse in old masonry buildings, that mainly induced from the corrosion of connecting materials. So, it is necessary to develop the effective and uncorrosion connector. Therefore, this study aims to investigate the structural performance of masonry face walls with opening constructed by new connectors, spiral stainless anchors and to provide basic data for the field application of this method. The specimen reinforced bed joint has maximum load and displacement any other specimens.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.391-396
• /
• 2001

Exposed concrete execution is utilized insufficiently due to surface honecomb and undesirable appearance by entrapped air when existing placing method is applied. Therefore, surface glossing and impact properties of cement mortar incorporating fiber glass net blast furnace slag, expansive admixture and Polypropylene fiber are investigated in order to develop precast exposed concrete pannel by dry construction method. The kinds of the forms, placing method and admixture contents are varied. According to test results, surface glossing decrease with elapse of age. Considering the form kinds, surface glossing with acryle + astage shows the best performance. Placing horizontally shows positive results in reducing surface defects such as honecomb. Impacting resistance shows the best performance when glass fiber net applied, due to the enhance in toughness and absorption of impact.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.170-172
• /
• 2007

미포만 공유수면 매립공사는 방파호안 854.5m를 축조하고 부지 $100,514.3m^{2}$를 매립하여 현대중공업(주)의 조선용 블록 제작장 및 적치장을 조성하는 사업이다. 2004년 2월 해양 수산부 설계자문을 실시하고, 2004년 5월 실시계획 인가를 득하여 사업을 추진하여 오던 중, 최근의 이상파랑 및 태풍 내습 (2005년 8월, 태풍 나비)등으로 인하여 피해가 발행하는 동 사업시행자인 현대중공업(주)에서 사업계획의 일부 변경(공구분할)올 요청하여 1공구(미포만 북방파제 보강)공사만을 2005년 8월말로 완료하였다. 미포만 공유수면(II-Block) 매립공사(2공사)는 파량 내습시 피해발생 사전예방 및 상향된 심해설계파 등에 안전한 구조물 축조로 배후매립부지의 안전성을 확보할 수 있도록 호안의 마루높이를 상향하고 케이슨 및 피복재 중량을 증대하여 설계 및 시공할 수 있도록 하였다.

• Korean Management Science Review
• /
• v.30 no.3
• /
• pp.99-111
• /
• 2013

This paper studies the scheduling problem of storing and retrieving assembly blocks in a temporary storage yard. The objective is to minimize the number of relocations of blocks while the constraints for storage and retrieval time windows are satisfied. We present an integer programming model based on multi-commodity network flows, and the three revised models based on the properties of the problem. We show that the revised models are more efficient than the generic model through the numerical experiments.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.233-236
• /
• 2005

조선야드에서 외업의 여러 생산단계에 조립블록을 적기에 공급하여 생산작업을 진행하는데 지장이 없게하고, 희소자원인 작업장과 적치장을 효율적으로 사용하여 사내 물류비용을 절감하기 위해서는 효율적인 조선 조립블록 운영방안이 수립되어 한다. 본 논문의 목적은 현재 현대중공업에서 진행 중인 조선 조립블록 운영효율화 방안에 대한 프로젝트를 소개하여 현업에 종사하는 담당자들 및 연구자들에게 유익한 정보를 제공하고, 또한 본 논문의 저자들도 유익한 피드백을 받고자 함이다.

• The Science & Technology
• /
• v.8 no.9 s.76
• /
• pp.11-13
• /
• 1975

최형섭 과학기술처 장관은9월11일(목) 국립과학관에서 광복30주년 제21회 과학전에 출품된 186점의 심사결과 최고상(대통령상)1점 특상8점 우수상15점 장려상30점이 선정되었다고 발표했다. 치장관은 이날 기자회견에서 과학전람회를 개최하는 것은 과학기술의 발전과 국민생활의 과학화를 위해 풍토조성의 계기를 마련하는데 있다고 말했다. 최장관은 또 금년도에 출품된 작품은 전반적으로 예년에 비하여 수준이 향상되었고 각종 자품의 연구과정에서 국공립연구기관과 대학연구기관의 이용 및 협조가 뚜렷이 드러났다고 말했다. 최장관은 앞으로 과학전은 청소년 학생 교수 일반인들이 과학기술을 이해하고 관심을 갖도록 풍토조성을 장기적으로 펴나갈것이며 산업기술부문의 수상작품은 실용화 할 수 있도록 적극 지원하고 명년도 부터는 수상작품의 상금도 올릴예정이라고 말했다.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.207-215
• /
• 2011

Due to its large size, a ship is first divided into scores of blocks and then each block is constructed through various shops, such as the assembly shop, the painting shop, and the outfitting shop. However, each block may not be directly moved to the next shop and may be temporarily laid on a block stockyard because the working time in each shop is different. If blocks are laid on the block stockyard without any planning, the rearrangement of the blocks by a transporter are required because the blocks have the different in and out time. In this study, an optimal layout method based on the genetic algorithm was proposed in order to minimize the rearrangement of the blocks in the block stockyard. To evaluate the applicability of the proposed method, it was applied to a simple layout problem of the block stockyard.