• The Journal of the Korean dental association
• /
• v.9 no.1
• /
• pp.43-48
• /
• 1971

The purpose of this study is to evaluate the influence of genetics of the dimensions of dental arches in twins. Thirty-four pairs of Korean twins, of which twenty-three were monozygotic and eleven dizygotic, participated in the study. The twins ranged in age from 6 years to 12 years with mixed dentition. The results were as follows: 1) No significant differences were observed between male and female in mean interpair diffenences of monozygotic twins. 2) Mean interpair differences of monozygotic twins were lesser than these of dizygotic twins. 3) Highly significiant zygotic differences were observed in the mean interpair differences of the width of upper and lower dental arch. This suggest that there is a significant component of hereditary variability.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.288-296
• /
• 2011

Objective: The purposes of this study were to evaluate the relationship between the dental and basal arch forms; to analyze their differences in the tapered, ovoid, and square arch forms in normal occlusion by using three-dimensional (3D) virtual models; and to test the hypothesis that the overjet and maxillomandibular basal arch width difference have a significantly positive correlation. Methods: Seventy-seven normal occlusion plaster casts were examined by 3D scanning. Facial axis (FA) and WALA points were digitized using the Rapidform 2006 software. The dimensions of the dental and basal arches and the overjet were measured. The samples were classified into 3 groups according to arch forms: tapered (n = 20), ovoid (n = 20), and square (n = 37). Analysis of variance (ANOVA) was used to compare the dental and basal arch dimensions. The Pearson correlation coefficients between the intercanine as well as the intermolar widths at the FA and WALA points were calculated. Results: With regard to the basal arch dimensions, the tapered arch form showed a larger mandibular intermolar depth than the ovoid. Strong correlations were noted between the basal and dental intermolar widths in both the upper and lower arches (r = 0.83 and 0.85, respectively). Moderate correlation was found between the upper and lower intercanine widths (r = 0.65 and 0.48, respectively). Conclusions: The 3 dental arch form groups differed only in some dimensions of the skeletal arch. Moderate correlations were found between the basal and dental intercanine widths. These findings suggest that the basal arch may not be a principle factor in determining the dental arch form.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.33-41
• /
• 1996

Retrostpective study of two groups of patients was conducted to evaluate the physiologic drift of the mandibular teeth following the extraction of four first premolars. The concept of physiologic drift, commonly referred to as 'driftodontics', following first premolar extractions has been gaining acceptance in the orthodontic community, the exact nature and amount of drift has not been adequately documented. There were also no guide lines as to when drift should be allowed to now. The purpose of this study was to quantify physiologic drift of the untreated mandibular dentition following extraction of the four first premolars during the early permanent and late permanent dentition stages. The early permanent dentition extraction sample(Group 1) included 26 Patients and the mean age at pretreatment was approximately 13.5 years. The observation period following extraction was approximately 6.96 months. The late permanent dentition extraction sample(Group 2) included 31 patients. The mean age at pretreatment was 21.3 years, followed by a observation period of 7.26 months. During the observation period, except for the extractions, no other mandibular therapy was rendered. Pre-and post-treatment lateral cephalograms and dental casts were analyzed. The obtained results were as follows 1. Group 2 showed marked changes in movements of the mandibular incisors and canines but minimal changes in molars. 2. The amount of changes in movements of the mandibular incisors and canines were significantly greater in Group 1 than in Group 2. The results showed no differences in rates of molar movements between groups. 3. Physiologic drift of the dentition produced desirable changes such as decreased Incisor Irregularity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.147-157
• /
• 2019

This study aimed to evaluate skeletodental characteristics of patient with maxillary lateral incisor agenesis (MLIA) in mixed dentition. It involved the children in early mixed dentition who visited Pusan National University dental hospital for orthodontic purposed and had intact primary canines. 38 children with MLIA and 38 controls with the same chronological age satisfying the inclusion criteria were selected. The craniofacial structures and dental arch dimensions of the MLIA were evaluated using model & cephalometric analysis and compared to controls. The rate of unilateral MLIA was high in male and the rate of bilateral MLIA was high in female. In model analysis, the width / length ratio of maxillary anterior portion of the MLIA group were higher and arch perimeter of the maxilla of the MLIA group were smaller than those of the control group (p = 0.003, 0.04). Cephalometric analysis showed that there were no significant differences in terms of skeletal, dental analysis. In soft tissue profile, nasolabial angle was larger in MLIAs than in controls (p = 0.039). Considering these skeletodental characteristics of MLIA, early diagnosis and proper management is highly recommended to minimize the possibility of functional defect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.497-504
• /
• 2010

The treatment of Class II non-extraction cases, especially when premolar space is lost due to premature loss of the deciduous molars, usually requires distal movement of the maxillary molars. The Jones jig appliance is a non-compliant intraoral appliance and is effective for the distalization of the maxillary molars. It has unfavorable side-effects, however, so caution is needed to adjust the appliance and select appropriate cases. We reported four cases in which maxillary molar distalizations were concomitant with the alignment of palatally erupted premolars.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.130-143
• /
• 1989

The purpose of this study was to assess the early effect of FR III on the growing patients with anterior cross-bite. The lateral cephalograms and models were obtained from 7 patients at the time of pretreatment and correction of anterior cross-bite. The results were as follows: 1. A slight tendency of rotation toward anterosuperior direction and the growth to anterior direction were shown in maxilla. 2. There were a little change of mandibular vertical position and increase in lower facial height although some variations existed. 3. The bodily or labial tipping movement was shown in maxillary incisors. 4. The lingual tipping of mandibular incisors was shown in all cases. 5. Maxillary arch width increased while mandibular arch width usually changed a little although some variations existed. But it was difficult to summary in a word because variable responses were noted according to a wide variety of skeletal type, growth, and malocclusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.273-285
• /
• 1992

The purpose of this study was to evaluate facial form, arch form and tooth form in young adults to determine if a correlation exists. 115 subjects who had healthy natural maxillary incisors and good occlusion consisted of 71 males and 44 females ranging from 20-30 years of age. Facial photographs and, intraoral photographs of upper anterior teeth and dental casts of upper jaws were taken to demonstrate facial form, dental arch form and tooth form. Form analysis is determined by comparing the ratio of the widths of the faces, dental archs and the teeth. The Chi-square test of independence between facial form, arch form and tooth form, was executed and the significance level determined. The results were as follows : 1. The distribution of facial forms was 66.1% square-tapering, 27.0% square, 5.2% ovoid, 2% tapering-square. 2. The distribution of tooth forms was 65.2% ovoid, 20.0% square-tapering, 11.3 % tapering-square, 3.5 % square. 3. The distribution of arch forms was 50.4 % square-tapering, 48.7 % tapering, 0.9 % reverse tapering-square. 4. There was no large differences in the distribution of facial forms, dental arch forms and tooth-forms between male and female. 5. No relationship existed between the tooth form and the facial form. 6. No relationship existed between the facial form and the dental arch form. 7. No relationship existed between the tooth form and the dental arch form. 8. This gave the impression that dental arch form and facial form could not be used as a true index in tooth selection.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.238-245
• /
• 2014

In order to create denture occlusion that is functional, comfortable and balanced, it is necessary to both determine a vertical dimension of occlusion that is in harmony with the patient's musculature and to record a relatively repeatable jaw relation position. This require clinical skill to establish an accurate, verifiable and reproducible vertical dimension of occlusion (VDO) and centric relation (CR). Correct vertical relation depends upon a consideration of several factors, including muscle tone, inter-dental arch space and parallelism of the ridges. Centric relation is considered to be a repeatable position from which all opening and lateral mandibular movements begin and recording this position is a critical step in the fabrication of dentures. Any errors made while taking maxillo-mandibular jaw relation records will result in denture that are uncomfortable. The purpose of this paper is to review a very simple and efficient technique for accomplishing these two important steps in denture fabrication.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The lower $2^{nd}$ molar eruption is beginning to mesiolingually, then rotate to distobuccally so it has a tendency to be tilted and impacted mesially. Signs and symptoms of impacted $2^{nd}$ molar are similar to impacted $3^{rd}$ molar's. However, treatment plan for impacted $2^{nd}$ molar is different from that of impacted $3^{rd}$'s. The former is the preservation and uprighting of $2^{nd}$ molar so that it could act to recovery of mastication, symmetrical facial growth, maintaining the symmetry of dental arch, stable occlusion, while the latter is the extraction of tooth. If the uprighting treatment is planned, most proper protocol of treatment and the additional treatment opition should be applied with consideration for it's crown exposure, present of $3^{rd}$ molar which interrupt the uprighting process, extrusion of opposite tooth. Although it could not improve the esthetic result, it could prevent many dental problems. Therefore, uprighting for impacted lower $2^{nd}$ molar is meaningful treatment.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.773-785
• /
• 1994

It has been generally believed that the impaction or eruption of mandibular third molars has significant correlations with the growth of the mandible, size of mandibular arch and size of teeth. The purpose of this study was to examine if there is any correlation between the status of eruption of mandibular third molars and the amount of mandibular crowding. The effect of missing of third moalrs to mandibular crowding was studied as well. 140 adult students of Yonsei University were selected and divided into three groups according to the status of mandibular third molars, Group 1) congenital missing group, Group 2) eruption group, and Group 3) impaction group. The tooth size, dimensions of the mandibular dental arch, and the amount of crowding were measured and compared. Results were as follows ; 1. There was no statistically significant difference in tooth size between the missing group and the eruption group(p<0.05). Impaction group showed larger total tooth material, inci- sal tooth material, and individual tooth size except central incisors compared to missing group (p<0.05). Impaction group showed larger total tooth material, incisal tooth material compared to eruption group as well(p<0.05). When individual tooth size was compared, impaction group had larger central incisors, canines, and second premolars than eruption group(p<0.05). 2. Missing group showed larger intermolar width than impaction group and it was stati- stically significant(p<0.05). 3. When compared the amount of total crowding, impaction group showed the largest am- ount of crowding, then eruption group, and missing group showed the least amount of crowding respectively(p<0.05). There was no statistically significant difference between missing stoup and eruption group in the amount of incisal crowding(p<0.05). Impaction group show- ed the largest amount of incisal crowding among all three groups(p<0.05).