• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.115-126
• /
• 2000

Dental arch expansion is one of the method used to solve the dental crowding problem by non-extraction. Many formulae using tooth size have been suggested to predict ideal inter-premolar and inter-molar width. The purpose of this study was to evaluate the adequacy of some upper dental arch width prediction methods, namely Pont's method, Schmuth's method and Cha's method. The sample consisted of the casts of 119 Korean young adults who had no muscular abnormality, no skeletal discrepancy, and Angle's Class I molar relationships. Measurements were obtained directly from plaster casts; they Included mesiodistal crown diameters of the four maxillary incisors, as well as maxillary inter-first-premolar and inter-first-molar arch widths as specified by Pont. The correlation coefficients between the sum of incisors(SI) and upper dental arch width were calculated. The differences between predicted width and actual width were classified as overestimated, properestimated, and underestimated. The data obtained from each group were analyzed for statistical differences. The results were as follows : 1. Upper dental arch width indices were calculated from SI in normal occlusion (81.96 : premolar index, 62.55 : molar index). 2. Low correlations between SI and arch width were noted in normal occlusion (0.50 in the inter-premolar width, 0.39 in the inter-molar width). 3. Pont's formula and Schmuth's formula tended to overestimate the inter-premolar width. A more even distribution of estimates was noted in Cha's fomula. 4. Cases within $\pm$1 mm range of observed inter-premolar width were $45\%$ in the Cha's formula, $40\%$ in the Pont's formula, and $39\%$ in the Schmuth's formula. 5. All formulae had a tendency to underestimate the inter-molar width, but Cha's formula had better predictability than others. 6. Cases within $\pm$1 mm range of observed inter-molar width were $40\%$ in the Cha's formula, $29\%$ in the Pont's formula, and $13\%$ of Schmuth's formula. The data presented in this study does not support the clinical usefulness of ideal arch width prediction methods using the mesiodistal width of maxillary incisors.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.347-355
• /
• 2001

Maxillary and mandibular anterior dental arches often have the problems of occlusal relation and esthetics by malformations of teeth, congenital missing, et at. Though the clinician usually use the anterior ratio to overcome this problems, he has the limitation of a direct application this ratio to the prediction of anterior occlusal relationship by the change of anterior ratio as dental arch form, intercanine width, segment depth and arch perimeter. So this study examine maxillary and mandibular anterior dental arch forms by least square method using Korean normal occlusion models(man : 20 casts, woman : 20 casts). Maxillary and mandibular anterior dental arches of Korean normal occlusion models are curve fitted to polynomial function, beta function, hyperbolic cosine function in order. And this accuracy of curve fitting is constant regardless of man/woman and maxilla/mandible. The relationships between intercanine width, segment depth, and arch perimeter based on this owe fitted dental arch form are acquired. This relationships will give the prediction of anterior dental arch form and the information of more accurate anterior ratio according to intercanine width.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.871-880
• /
• 1997

Multiple features of occlusion have been combined by epidemiologists in attempts to objectively to determine malocclusion severity and treatment priority. Jenny et al were developed DAI(Dental Aesthetic Index), which is an orthodontic index based on socially defined aesthetic standards. This study aimed to evaluate association between 10 occlusal components of DAI and individual measures of skeletal morphology by use of univariate and multivariate analysis. In addition the relationship between a Dental Aesthetic Index score and skeletal morphology was evaluated. The data for this study were obtained from cephalometric radiographs and dental casts of 182 Korean patients(79 men, 103 women) with permanent dentition who had been accepted for the orthodontic treatment at Department of Orthodontics, Chonbuk National University. The results are as follows: 1. Several occlusal components of DAI(missing, crowding and spacing in the incisal segment, diastema, largest anterior irregularity on upper and lower arch) were not associated with individual measures of craniofacial morphology. 2. Sagittal occlusal components of DAI were associated with anteroposterior skeletal measures. 3. The relation between vertical occlusal components of DAI and vertical skeletal measures was low magnitude. 4. A Dental Aesthetic Index, which is based on several aspects of occlusion, did not identify craniofacial morphology. We can conclude that combination of certain occlusal components of the DAI may be related with specific skeletal morphology; but, this concept could not be accepted generally.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.377-391
• /
• 2015

Inter-dental arch discrepancy between maxilla and mandible could cause three dimensional occlusal problems, and collapse of occlusal plane, multiple teeth loss and decrease of masticatory efficiency could be observed in patient having unstable occlusal contact. Patient showing posterior bite collapse, unstable occlusal contact and improper anterior guidance should be treated to recover stable centric occlusion, occlusal contact, and anterior guidance in conjunction between prosthodontics and orthodontic treatment. This clinical report describes the favorable results of orthodontic and prosthodontics rehabilitation of patient with above mentioned problems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.293-300
• /
• 2012

In case of treating the functional type of anterior cross bite, removing the cause in early stage prevents from turning to skeletal type, leads to perform normal function, and has improved facial appearance. Functional Regulator III (FR III), one kind of the Functional regulator(FR)s suggested by R$\ddot{o}$lf Fr$\ddot{a}$nkel in 1966, applied to patients with the functional and skeletal anterior crossbite in early mixed, and permanent dentition. This appliance improves unbalanced power condition by blocking abnormal muscle-power effect, so that normal growth can be expected. In this case report, favorable results were obtained by selecting clinical cases of children in their early mixed dentition with functional cross bite. 1. FR IIIs were applied to patients with anterior crossbite for 5~6 months. Anterior crossbite patients were corrected favorably, nevertheless they didn't show any horizontal skeletal-changes by buccal shields. 2. Normal occlusion and esthetic facial contour were achieved from dental movement of maxillary and mandibular anterior teeth while the mandible rotates to posterior and inferior direction.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.15-22
• /
• 2005

The Purpose of this study was to clarity morphological differences among mandibular dental arch forms in Korean malocclusion patients. The sample in this study consisted of 114 Class I. 119 Class II, and 135 Class III malocclusion cases. The most facial portions of 13 proximal contact areas were digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on the data on the mandibular tooth thickness. Four linear and two proportional measurements were undertaken The dental arches were classified into square. ovoid, and tapered forms to compare the frequency distributions. Our results suggested that there was no single arch form specific to any particular Angle classification or sex. It appeared to be the frequency of a particular arch form that varies among the Angle classifications. In comparison of arch measurements between male and female. there was no statistical difference except in the intermolar width. In comparison of arch size measurements among the different Angle classifications, there were statistically significant differences between Class I and Class III malocclusion groups and between Class II and Class III malocclusion groups. In comparison oi frequency distribution of arch forms in Class I and III malocclusion groups, the square form demonstrated the highest distribution followed by the ovoid and tapered forms in that order. In the Class II malocclusion group, the square form showed the highest distribution. followed by the tapered and ovoid forms in that order There was no statistical difference in the frequency distribution of arch forms between male and female groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.270-277
• /
• 2005

The purpose of this study was to clarify the palatal volume and anterior palatal slope of the children with class II div.1 malocclusion and normal occlusion in mixed dentition(Hellman dental age III A) using three-dimensional laser scanner. Samples were consisted of 31 children with skeletal class II div.1 malocclusion in mixed dentition and 29 children with normal occlusion and profile among the contestants in 2000-2004 Healthy Dentition Contest in Seoul. Totally 60 maxillary study model were taken. Each cast was scanned by three-dimensional laser scanner (Breuckmann opto-TOP HE, INUS, Korea) and shaped into the three-dimension image by Rapidform 2004 program(INUS, Korea). And the palatal volume and anterior palatal slope of each cast were calculated by Rapidform 2004 program(INUS, Korea). The values were statistically compared and evaluated by independent samples t-test with 95% of significance level. The results were as follows: 1. Palatal volume was significantly lesser in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.05). 2. No significant difference in the anterior palatal slope and palatal height was found between the children with class II div.1 malocclusion and normal occlusion in mixed dentition(p>0.05). 3. Palatal length was significantly greater in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.01). 4. Intercanine and intermolar width were significantly lesser in children with class II div.1 malocclusion than those of normal occlusion in mixed dentition(respectively p<0.05 and p<0.01).

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.224-236
• /
• 2011

Objective: The purpose of this study was to analyze the dental and basal arch forms in patients with normal occlusion using the computed tomography (CT) imaging method. Methods: CT images were taken from 27 normal occlusion subjects (male, 15; female, 12) and these images were reconstructed into three-dimensional models. A 3D-coordinate system was formed by setting the middle of the facial axis (FA) point of the maxillary central incisors as the origin. The morphology of the maxilla and mandibular dental and basal arches were analyzed by sectioning parallel to the maxillary occlusal plane. Results: There was no significant difference between A point and B point and between the maxillary 1st molars in both sides of the maxillary and mandibular basal bone. The dental arch was located more labially than the basal arch in the anterior portion. The bucco-lingual crossover of the dental arch and basal arch was formed at the molar region in the maxilla, and at the premolar region in the mandible. Conclusions: This study will help provide three-dimensional diagnostic information about the relationship between basal and dental arches in patients who have severe dental compensation and inappropriate jaw relationships.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.376-381
• /
• 2008

In mixed dentition there exists many empty spaces in the arch due to eruption of permanent teeth and exfoliation of primary teeth. The empty spaces makes it difficult to apply fixed orthodontic appliances. Horseshoe Appliance can be used effectively at this stage, holding the whole dentition in one piece. It covers every surface of erupted teeth and prevents extrusion and rotation of single tooth. By using intermaxillary elastic force, remodeling of the alveolar bone is opposite in each arch. In patients who were treated with horseshoe appliance, forward growth of maxilla, labioversion of maxillary incisors and linguoversion of mandibular incisors were obtained. Minimum downward and clockwise rotation of mandible was shown, so increasing anterior facial height was minimized.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.101-110
• /
• 2013

$T4K^{TM}$(Myofunctional Research Co, Australia) is one of the myofunctional appliance developed to be used in children of mixed dentition. Myofuncitonal appliance stimulate the facial, masticatory and tongue muscle and help to balance the muscular force. Labial bow included in the device exerts strength in excessively labial inclineded upper jaw, Lip bumper blocks strength of the mouth to prevent abnormal strength exerted in lower jaw, Tongue tag secures proper position of tongue, and additional exercise is not required for child patients. For the more, simpler design and softer texture of device prmoted cooperation of patients during use. This case report is to present the satisfactory results gained by using $T4K^{TM}$ on Class II patients. Comment 1. $T4K^{TM}$ was applied in Class II malocclusion patients of mixed dentition with expected space insufficient to gain facial improvement. 2. Excessive overjet, overbite were improved. 3. Main effects are regarded to have been achieved by development of lingual slant of upper jaw, labial slant of lower jaw, and lower part of jawbone. 4. Bad habits, such as mouth breathing, can also be adjusted.