• Applied Microscopy
• /
• v.41 no.4
• /
• pp.223-228
• /
• 2011

White light scanning interferometry has been employed to analyze surface features of diverse specimens. Long established in the field of materials engineering, the technique provides quantitative three-dimensional data as well as qualitative morphological images. It uses white light that is split and reflected from a reference mirror and an object. Merged together, the light generates interference patterns representing topographical contours of the object surface. The amplitude of the z-axis data is differentiated by gray scale. The technique allows the rapid, noncontact, and wide-field measurements for morphometry of biological specimens including chondrocytes, tooth enamel, and plant leaves. Quantification of the dimension of surface structures such as width, length, and elevation angle could be achievable by white light scanning interferometry. The light reflection from plant leaves has been assumed to be sufficient for the technique. Without special specimen preparations like conductive metal coating, the technique can be increasingly used for quantitative three-dimensional surface measurements of biological specimens.

• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.121-124
• /
• 2002

The fructan-producing enzyme, fructosyltransferase (FTF), was immobilized on the surface of 4 differents hydroxyapatites by simple incubation. Among the resins, the Type I (${20{\mu}m}$) hydroxyapatite gave the highest yield in terms of immobilization yield and enzyme activity. The fructan synthesis activity of the immobilized FTF was similar with that of the free enzyme, and were about 70-80% on fructose basis with substrate at 100~200 g/L. The binding time between the hydroxyapatite and FTF was terminated within 2 h, and the binding capacity of the Type I ($20{\mu}m$) hydroxyapatite was above 60 U of FTF/g of the resin. By immobilization, the FTF stability against proteolysis, was greatly improved by approximately 3-4 fold. Thus, the present study demonstrated that immobilization of FTF on the surface of the hydroxyapatite occurrs in simple reaction and the binding strength is strong enough to produce the fructan.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.24-30
• /
• 2018

Dental implants are currently widely used as artificial teeth due to their good chewing performance and long life cycle. A dental implant consists of an abutment as the upper part and a fixture as the lower part. When chewing forces are repeatedly applied to a dental implant, gap at the interface surface between the abutment and the fixture is often occurred, and results in some deteriorations such as loosening of fastening screw, dental retraction and fixture fracture. To cope with such problems, a sealing-type abutment having a number of grooves along the conical-surface circumference was previously developed, and shows better sealing performance than the conventional one. This study carries out optimization of the groove shape by genetic algorithm(GA) as well as structural analysis in consideration of external chewing force and pretension between the abutment and the fixture. The overall optimization system consists of two subsystems; the one is the genetic algorithm with MATLAB, and the other is the structural analysis with ANSYS. Two subsystems transmit and receive the relevant data with each other throughout the optimization processes. The optimization result is then compared with that of the conventional one with respect to the contact pressure and the maximum stress. The result shows that the optimized model gives better sealing performance than the conventional sealing abutment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.268-273
• /
• 2021

Paramolar tubercle is a rare developmental dental anomaly defined as an additional cusp occurring on the buccal or lingual surfaces of the molar. Permanent molar fused with paramolar tubercles can be a cause of difficulty in root canal treatment. Therefore, proper understanding of these variations is important in order to ensure successful endodontic treatment. Cone beam computed tomography (CBCT) can be helpful to understand anatomy of complicated cases. This case report describes nonsurgical endodontic treatment of maxillary second premolar fused with paramolar tubercle.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.1
• /
• pp.24-30
• /
• 2024

Complicated crown fractures of maxillary anterior teeth caused by trauma in adolescence can cause functional and aesthetic problems. For crown fractures with pulp exposure, various restorative methods can be considered depending on the amount of remaining tooth structure. Direct resin restorations are the most traditional and effective method, but they are likely to discolor and break over time. Fixed prosthesis have a high possibility of re-restoration due to marginal disharmony due to tooth movement during the growth period, and restorations using post which are mainly performed for extensive crown fractures increase the risk of root perforation and root fracture. However, endocrown is an integrated structure that gains retention force from the pulp space, enabling effective reconstruction from a biomechanical perspective and providing advantages in restoring function and aesthetics. Therefore, endocrown can be considered as a restoration method for complicated crown fractures caused by trauma in adolescence.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.743-760
• /
• 1997

This study was done to evaluate the correlations between the size, the form of the cranial base, head posture and the horizontal and vertical position of craniofacial structures. For this purpose, 100 cephalometric radiographs were taken from the sample composed of 51 male and 49 female, 12 measurement criteria and 37 reference points were established and digitized, then calculation was performed for the values of measurement variables and the horizontal and vertical position of reference points. The correlations be4ween them were analyzed statistically and mean facial diagrams were constructed and compared with the selected groups which were composed of 10 Samples each as large and small group from the measurement value. The following results were obtained: 1. The angles n-s-ba and n-s-ar as variables for the ion of cranial base correlated highly to the horizontal and vertical position of reference points in the cervical column with statistical significance($0.1\%$ level). 2. The angles n-s-ba and n-s-ar as variables for the form of cranial base correlated to the horizontal position of the reference points in the facial structure with statistical significance($1\%$ level), but not to the vertical position of them($5\%$ level). 3. The length n-s, s-ba, and n-ar as variables for the size of cranial base were correlated th the position of craniofacial structures in various ways, but in general, highly correlated to the horizontal and vertical position of midfacial structures around the teeth and alveolar area. 4. the angle NSL/CVT and NSL/OPT as postural variables tot the inclination of cranial base and cervical column were correlated to the horizontal position of the craniofacial structures with statistical significance($1\%$ level), but not to the vortical position of them($5\%$ level). 5. The angle OPT/HOR and CVT/HOR as postural variables lot the inclination of cranial base and true horizontal line were not correlated to the horizontal and vertical position of the craniofacial structures with statistical significance($5\%$ level). 6. The correlation between the measurement variables and horizontal and vortical positions of the reference poits in soft tissue were shown as similar to the related hard tissue points.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.135-145
• /
• 2000

It is well known that there are different craniofacial skeletal groups in the same malocclusion types. The present study was performed to determine morphologic sub-groups in Korean children with Class III malocclusions, and to find out morphological differences between subgroups by means of a cross-sectional longitudinal cephalometric study. In this study, 135 children aged 6 to 14 year-old with untreated Class III malocclusions were selected. The samples were divided into two groups depending on the angulation of middle cranial fossa (MCF). That is, when the MCF of an individual was measured smaller than 40.3, he/she was tossed into mandibular protrusive-effect group(MREG), while when an individual was measured larger than 40.3, he/she was tossed into mandibular retrusive-effect group(MREG). Thereafter, the grouped samples were divided into 4 age groups(7, 9, 11 and 13 year-old). Thirty four linear and angular measurements on the tracings of lateral cephaloradiographs were measured, and the morphological characteristics and differences were compared and analysed by means of Wilcoxon test. It was found that Korean children with Class III malocclusions were divided into two groups, in which 39.3% were belonged in the MREG and 60.7% were in the MREG. In the MREG, anterior-posterior length of cranial base, nasomaxillary complex, maxilla and mandible were larger than the MREG. And although there was no difference in the total length of mandible (Co-Gn), mandibular body length (Go-Gn) was larger in the MREG during the majority of the observed periods. These results would suggest that a majority of the samples, 60.7%, demonstrated many of configurations of craniofacial skeletal relationships that can be found in the leptoprosopic faceform.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.275-280
• /
• 2009

Radicular cyst is a true epithelium lined cyst formed when epithelium at the apex of a nonvital tooth is stimulated by inflammation. It is the most common type of cyst in the oral cavity, but its frequency is low in the primary dentition. Treatment of large-sized cyst aims at conservation of adjacent structure and allowance of proper eruption of the successive permanent teeth in the primary dentition. Considering these two aspects, marsupialization or enucleation following decompression is recommended as a treatment means for large-sized radicular cyst. In this case, 8-year old boy visited the pediatric dentistry department. Yonsei University Dental Hospital, with the chief complaint of pain on the lower right area. Clinical and radiographic examinations revealed periapical radiolucent lesion on #84, which had previous pulp treatment and restorated with the stainless steel crown. Dislocation of its successive tooth, #44, was also observed. #84 was extracted and sent for biopsy. Through histologic examination, it was diagnosed as radicular cyst. Following its extraction, removable space maintainer was delivered, which was also used as a decompressor. During periodic check-up for next 22 months, favorable healing of the lesion and eruption of the successive tooth were observed.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.435-442
• /
• 2020

Porcelain is the first ceramic material to be introduced into dentistry. Porcelain jacket crown was introduced by Dr. Charles H Land in 1886, which was an excellent aesthetic dental restoration but has not been widely used due to high firing shrinkage and low tensile strength. Then metal-ceramic system, which combines the esthetic properties of ceramics and the mechanical properties of metals, was introduced and nowadays it is still used in dental clinical field. However, the metal-ceramic system has shown some problems, such as increased lightness by reflection of light at opaque layer, shadow beneath the gingival line due to the block-out of light by metal coping, exposure of metal in margin part, bond failure between metal and porcelain, oxidation of metal coping during firing the porcelain, etc. Recently, along with the advance of fabrication methods of dental ceramics, the all-ceramic restorations with high esthetic and mechanical properties has increased and gradually replaced metal-ceramic restorations. Especially, CAD/CAM technology has opened a new era in fabricating the dental ceramic restorations. This overview will take a look at the past, present and future possibility of the dental ceramic materials.