• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.160-166
• /
• 2016

Although physiologic abrasion in normal range need not to be corrected, when hard tissue of teeth are worn abnormally fast, it can cause severe damage and destroy esthetics and, functional structure of occlusion consequently. To establish a correct occlusal plane and space for the patient with worn dentition, it is necessary to increase vertical dimension. However, actual occlusal vertical dimension remains unhanged with compensation for the increase of alveolar bone height equivalent to the decrease of teeth length. A 74-year-old male presented with worn dentition and fractured tooth. Based on the assessment of OVD including clinical findings, full-mouth rehabilitation without increase of OVD was planned. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition without changing occlusal vertical dimension.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The purpose of this study was to compare the strain on the alveolar ridge in the centric, eccentric and protrusive position according to the occlusal scheme (bilateral balanced occlusion with 33 degree anatomical teeth, group B; monoplane occlusion with non-anatomical teeth, group M; lingualized occlusion with 33 degree anatomical teeth and non-anatomical teeth, group L; of complete dentures. Experimental dentures were set bilateral balanced occlusion, lingualized occlusion and monoplane occlusion. They are analysed through T-Scan II(Tekscan, Boston, U.S.A) and 1.5mm thick layer was removed from the denture-supporting surface of resin model and then replaced with silicone to simulate resilient edentulous ridge mucosa. A $4{\times}6$ linear strain gauge is attached to the $1^{st}$ premolar and $1^{st}$ molar area. The strain values are recorded according to the occlusal scheme in the centric, eccentric and protrusive position after uniformly applying 50 N and 150 N force through a Universal Testing Machine(instron$^{(R)}$ 5567, Bluehill 2.0 software ,U.S.A.) with the models mounted in the articulator. When performing centric and protrusive occlusion, the three groups of occlusal scheme were compared in the anterior region and in the posterior region. The strains of each group were also compared in the working side and in the non-working side during eccentric excursion. It was observed that the strain in the bilateral balanced occlusion showed a higher value than the lingualized occlusion and monoplane occlusion in every position except the non-working side. However, during the eccentric movement the strain value in the non-working side showed the lowest value in the bilaterally balanced occlusion. The strain change amount from the working side or centric occlusion to non-working side and also the strain variation rate within the non-working side showed the highest value in bilateral balanced occlusion.

• Journal of Oral Medicine and Pain
• /
• v.32 no.1
• /
• pp.121-128
• /
• 2007

If patients complain about sudden ill-fitting occlusal sensation(acute malocclusion), a dentist has to consider many possible causes about that. Acute malocclusion is characterized its sudden onset and mainly can be caused by teeth and its related structure problem. But we always keep on mind that acute malocclusion also can be caused by temporomandibular disorders In this 3 cases of acute malocclusion, evaluating by patient history, clinical and radiographic findings, we diagnosed them as 1. Lateral pterygoid muscle spasm, 2.. Retrodiscitis, 3. Osteoarthritis. Through this non-odontogenic acute malocclusion cases, we emphasize the key of diagnosis is on comprehensive and careful patient history taking and clinical examination.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.455-462
• /
• 2010

Patients often seek rehabilitative treatment for severely worn dentition. The etiology of noncarious tooth wear due to attrition, abrasion, and erosion is multifactorial. To treat the worn dentition, it is important to identify and eliminate and/or control the factors that contribute to excessive wear. Many situations requiring complete mouth rehabilitation present with the challenge of a lack of restorative space. To establish a correct occlusal plane and space for prostheses, it is necessary to increase vertical dimension. This may require an increase in occlusal vertical dimension. Also clinicians should be able to choose the appropriate restorative materials to achieve excellence in natural esthetics as well as proper biomechanics and durability. This article presents a method for altering occlusal vertical dimension to restore dentitions with limited restorative space due to loss of tooth structure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.143-157
• /
• 2000

To investigate the developmental stages of dental and skeletal maturation by ages and the correlations among dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist, the author used the cephalograms, orthopantomograms, and hand-and-wrist radiograms of 1055 patients (male 458, female 597) aged 7 to 20 years old. In the cephalograms, the skeletal maturity stages of each bone were mainly assessed by Hassel and Farman's cervical vertebrae maturation indicators (CVMI) method. In the orthopantomograms, the dental maturity stages of each tooth were mainly assessed by Nolla's tooth calcification stages method. In the hand-and-wrist radiograms, the skeletal maturity stages of each bone were mainly assessed by Fishman's skeletal maturity indicators (SMI) method. The results were as follows. 1. There was a high correlation among dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist in the both sexes (P<0.001). 2. There was a high correlation (r=0.91-0.93) between skeletal maturity of cervical vertebrae and that of hand-and-wrist. 3. There was a high correlation (r>0.8) between skeletal maturity of hand-and-wrist and maturity of upper and lower canine, first premolar, and second premolar. 4. There was high a correlation(r=0.8) between skeletal maturity of cervical vertebrae and maturity of upper canine. 5. By the ages, dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist were obtained in the both sexes. In summary, dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist we of sufficient diagnostic worth as an index to predict adolescent growth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.323-330
• /
• 1999

It is well recognized that a cross-bite tends to occur more frequently among Japanese, Chinese and Koreans more than among Europeans. A variety of functional appliances have already invented for the treatment of cross-bites. One of them is the FR III(by Rolf $Fr\ddot{a}nkel$) which applies a quite different philosophy based on the using vestibular region compared with other methods which utilize muscular forces applied directly on the teeth. The FR III also increases both the lack of muscular tension against the dental arch and the dentition and muscular forces which can then influence the teeth indirectly. This mechanism can achieve favorable developments with the basal bone, teeth, and alveolar bone. After using FR III to the anterior cross-bite patient with the eruption of a maxillary incisor the results were as follows: 1. Forward growth of maxilla and proclination of the upper incisor 2. Downward and backward rotation of the mandible 3. Increase the facial height 4. The case which was normal mandible, underdevelopmental maxilla, deeper overbite and more nagative overjet exhibited good prognosis

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.72-81
• /
• 2024

To rehabilitate a patient with inappropriate occlusion due to posterior support loss, it is necessary to achieve an appropriate occlusal vertical dimension and create prostheses that demonstrate stable occlusion at the centric relation for full mouth restoration. This case shows full mouth rehabilitation in a patient with missing posterior teeth and tooth wear, achieved through implant-supported prostheses and zirconia full-veneer crowns. To assess adaptation to the increased occlusal vertical dimension, an occlusal splint and temporary restorations were secured. By fabricating the definitive restorations based on the anterior guidance of the temporary restorations, stable occlusal rehabilitation was successfully achieved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.347-353
• /
• 2018

Gradual attrition is a normal process of aging, but severe attrition causes occlusal disharmony, functional disorder and esthetic problems. The collapse of posterior support may cause attrition of anterior teeth, and loss of occlusal vertical dimension (OVD). And it induces the pathologic change of the TMJ, unaesthetic facial appearance and decreased masticatory function. In this case, 70 year-old male presented with decreased vertical dimension and esthetic problems due to worn dentition. Based on assessment of intraoral findings, diagnostic cast and radiographic examination, full-mouth rehabilitation with increase of OVD was planned. After 10 month follow-up, occlusal stability is maintained and through this procedure, satisfactory outcomes were achieved in esthetic and functional aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.252-257
• /
• 2014

It is important to produce a provisional restoration reflecting the patient's jaw relation, occlusal plane, lip support, shape of teeth, and occlusion type for fully edentulous patients before making a definite prosthesis. The patient introduced in this study showed bad prognosis of remained tooth after severe periodontal diseases. Therefore, remaining teeth were extracted and replaced with dental implants. Provisional restorations were fabricated and the the patient's vertical and horizontal jaw relationship, occlusal plane, amount of overjet and overbite, size of teeth, and length of anterior tooth were recorded. Provisional restorations were scanned and CAD/CAM techniques were used to fabricate a monolithic zirconia bridge, which contour is identical with the provisional restorations. The patient was satisfied with the treatment results on functional, esthetic aspects and the prosthesis retained stable during the four-month clinical observation period.