• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.453-453
• /
• 2018

2017년 12월 기준 우리나라에 등록된 자동차는 약 2,200만 이상으로, 그 증가율은 매년 증가하는 추세이다. 이러한 최근 차량대수 및 고자산인 외산차 보유율 증가는 자연재난에서 노출과 관련한 위험도를 증가시키는 주요인이 되며, 홍수발생 시 상당한 규모의 경제적 피해를 야기한다. 현재 국가연구개발사업으로 진행 중인 행정안전부(2017) 연구는 위험지역 내 차량의 공간적 분포와 차량유형별 침수심에 따른 취약성을 고려하여 어떠한 홍수사상으로부터 예상되는 차량 피해액을 추정하는 방법을 제시한 바 있다. 여기서는 어떠한 집계구 내에서 동일한 침수심 구간을 가지는 면(polygon)을 분석단위로 하고 있는 데, 이를 편의성 차원에서 벡터자료에 기반 한 연산과정을 수행할 경우 정의된 침수구역도(재해정보)의 고유 정보가 훼손되거나, 세분화된 침수심 구간에 따른 손상률 관계를 사용할 수 없는 문제점이 있다. 이에 본 연구에서는 격자 기반의 침수구역도와 인벤토리 지도로부터 Raster GIS 공간연산을 활용한 차량피해 산정절차를 제시하였고, 이를 신천수계 하천기본계획(경기도, 2011)에서 계획된 치수사업에 적용하여 홍수빈도별 사업시행 전후 상황에 적용하였다. 이 과정에서 침수구역도는 인벤토리 상의 집계구 면적을 고려하여 $5m{\times}5m$ 크기로 제작하였고, 동일한 격자크기로 변환된 인벤토리는 변환 전후 면적을 기준으로 할 때 거의 오차가 없는 것으로 확인되었다. 그리고 Raster 공간연산으로부터 침수편입률을 결정하는 과정에서 집계구 넘버 및 침수심 정보를 확인하기 위한 자료별 전처리 과정을 제시하였고, 여기서 집계구 넘버는 인벤토리 정보와 침수심 정보는 손상함수와 연계된다. 본 연구에서 제시한 결과는 향후 실무에서 직접 적용하는 데 활용하기 위하여 방법론과 함께 가이드라인 문서로 정리할 계획이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.464-464
• /
• 2018

최근 풍수해 현황 분석(국민안전처, 2016)에서는 2003년 이후 태풍 루사와 매미와 같은 대형태풍이 최근에 발생하지 않아 대부분 하천급류로 인한 인명피해가 대부분이라고 언급하였다. 최근 풍수해로 인한 피해가 발생하지는 않았지만 호우/태풍이 발생할 경우 인명보호와 불편해소를 최우선에 두고 각종 정책들을 선제적으로 추진하고 있어 홍수범람발생 예상지역에 대한 인명피해 분석은 반드시 필요하다고 판단된다. 최근들어 인명피해를 평가하는 기술은 피해자료로부터 비교적 간단히 분석되는 경험적 방법에서 2차원 동적 수리모형과 연계, 그리고 정밀한 인구, 건물 등의 자료를 활용하여 대피율, 사전경보 등 인명피해에 영향을 미치는 다양한 요소를 복합적으로 고려하고 개념적이고 기계적 방법으로 발전하는 추세이다. 우리나라의 경우 인명피해 평가와 관련한 연구사례가 거의 전무한 상태이고, 치수경제성분석에서 제시하는 침수면적에 기반한 간략한 방법만이 실무에서 활용되고 있다. 최근 국외에서 제시한 접근방법은 본 연구에서의 개발하고자 하는 목적과 방향에 부합하지 않다고 판단되며, 국내 실정을 고려할 때 주요 영향인자를 추가하고, 특히 노출인구, 인명 인벤토리의 해상도를 높이는 데 주안점을 두고자 한다. 홍수로 인한 인명피해 발생확률은 사후분석의 일환으로 침수흔적도를 통해 총 2개의 침수구간을 설정한 후 Census data를 활용한 위험인구(Population at Risk, PAR)를 산정한후, NDMS 인명피해 자료를 활용하여 침수구간별 인명피해 발생확률을 제시하였다. 여기서 제시한 침수구간의 경우 데이터의 축적정도에 따라 구간을 세밀화 할 수 있는데, 본 연구에서는 총 2개구간(0-1m, 1m 이상)으로 계략화 하여 제시하였다. 본 연구에서는 4개의 지자체의 인명피해 자료를 통해 인명피해 발생확률을 산정하였으며, 해당내용을 시범유역의 빈도별 침수구역도에 적용하여 인명피해 발생을 분석하였다. 해당 연구결과의 경우 인명피해에 대한 명확한 결과를 유추하는데에는 한계가 있지만, 인명피해에 기반한 해당지역의 장래피해규모를 예측하는 데에는 기초가 될 수 있을 것으로 판단된다.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.54-66
• /
• 2004

In this article, we are to suggest the hazard-assessing method for the underground pipelines, and find out the pipeline-maintenance schemes of high efficiency in cost. Three kinds of methods are applied in order to refer to the approaching methods of listing the hazards for the underground pipelines: the first is RBI(Risk Based Inspection), which firstly assess the effect of the neighboring population, the dimension, thickness of pipe, and working time. It enables us to estimate quantitatively the risk exposure. The second is the scoring system which is based on the environmental factors of the buried pipelines. Last we quantify the frequency of the releases using the present THOMAS' theory. In this work, as a result of assessing the hazard of it using SPC scheme, the hazard score related to how the gas pipelines erodes indicate the numbers from 30 to 70, which means that the assessing criteria define well the relative hazards of actual pipelines. Therefore. even if one pipeline region is relatively low score, it can have the high frequency of leakage due to its longer length. The acceptable limit of the release frequency of pipeline shows 2.50E-2 to 1.00E-l/yr, from which we must take the appropriate actions to have the consequence to be less than the acceptable region. The prediction of total frequency using regression analysis shows the limit operating time of pipeline is the range of 11 to 13 years, which is well consistent with that of the actual pipeline. Concludingly, the hazard-listing scheme suggested in this research will be very effectively applied to maintaining the underground pipelines.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.53-65
• /
• 1992

For elucidating effective methods of restoration of forest recreational sites where management goals are maintaining naturalness and conserving natural ecosystem, seeding, fertilization and soil surface treatment were used for four years at the devastated forest-floor. For restoration of forest-floor vegetation, factorial experiment was used with a split plot design(main plot : fertilization, subplot : soil surface${\times}$seeding) and a randomized complete block design (fertilization${\times}$seeding) at the Kwanaksan Aboretum, Anyang, Kyonggido. Results were summarized as follows : Soil surface softening with tipping and ripping and straw-mat mulching (70% coverage) treatment was effective on germination, survival and growth of seeded vegetation at devastated forest-floor. Especially, straw-mat mulching treatment was effective on soil surface stabilization and seedling's survival at eroded soil surface, while complete soil surface softening treatment was effective on germination, survival and early growth of tree species of late-successional series. Introducing seeds of native species of pioneer or early-successional series, with good growth capability in barren soil was effective on rapid restoration in devastated forest-floor with its soil surface previously compacted and its surviving seeds washed away. When the seeding and straw-mat mulching after partial soil surface softening with tipping and ripping treatment were employed, it took about three years to restore the devastated forest-floor where surface erosion had been undertaken for an extended period of time and where naturally surviving seeds of native species had been washed away. Softening treatment of soil surface was effective for about two years, and seeding and soil surface treatment increased number of seedlings and improved soil surface environment through fixing of movement of the fallen leaves. Fertilizing effect was not oberserved, mainly due to seeding exposure and poor physical condition including soil surface erosion, low soil water potential and drought, etc, at the field experimental site. However, application of nitrogen and phosphate fertilizers was effective on seedling survival of the species in late-successional series, while lime application adversely affected the seedling survival.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.398-408
• /
• 2006

The purpose of this study was to verify the usefulness of MTT analysis as a tool of measurement of the periodontal ligament cell viability from the extracted rat molar. A total of 80 Sprague-Dawley white female rat of 4 week-old with a body weight of 100 grams were used. The maxillary left and right, first and second molars were extracted under Ketamine anesthesia. Twenty-four teeth of each group (divided as five groups depending upon the time-lapse after extraction such as Immediate, 10, 20, 40 and 60 minutes) were immersed in $200{\mu}l$ of MTT solution (0.5 mg/ml) and processed for optical density measurements. Another 10 teeth of each group were treated as same as above and sectioned at $10{\mu}m$ for microscopic examination. All measurements values were divided by the value of hematoxylin-eosin staining which represented the volume of each corresponding samples. Immediate and 10 minute groups showed highest MTT values followed by 20, 40, and 60 minutes consecutively. Statistical significance (p<0.05) existed between all groups except in immediate versus 10 minute groups and 40 versus 60 minutes. Histological findings also showed similar findings with MTT results in crystal shape and crystal numbers between the experimental groups. These data indicate that in vivo MTT analysis nay be of value for evaluation of the periodontal ligament cell viability without time- consuming cell culturing processes.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.187-192
• /
• 2015

Individuals in the population under a particular environmental condition influencing recurrently for a long time could locally adapted and local adaptation is of a fundamental importance in a breeding program, conservation activities of genetic resources or evolutionary biology. Plants at northern range limits have higher probability of expressing an adaptative genetic trait. The natural community at the northern range limit of Ilex cornuta (Chinese holly) in Buan, Jeollanam-do in Korea was composed of adults of 744 and seedlings of 211 (hereafter Community) and is designated as the Korean Natural Monument (No. 122) by the law. At two adjacent areas to Community, 85 (hereafter Plantation I) and 27 hollies (hereafter Plantation II) were planted respectively for preparations of the next generation. Eighty-five trees were sampled for genetic analysis in the three groups. Fifty-two (36%) of the total 143 amplicons were polymorphic from four AFLP primer combinations. A total of thirteen genotypes was identified and just one genotype was for 52 trees of Community. Seven and five genotypes were shown for Plantation I and II, respectively. There was no identical genotype between Community and Plantation (I or II) or between two plantation groups. Number of private loci was 2 for Community, 6 for Plantation I and 4 for Plantation II. We presumed their genetic backgrounds were quite different with one another and the plantation groups were made independently because they were different not only the genetic compositions but also their ages. Considering the genetic monomorphism by AFLP markers, observations of only male trees and asexual propagation as layerage or cuttage, the hollies in Community might be a genet by root suckering from a single male tree, not the results of selective removal of female trees for ornamental use in the past.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.54-60
• /
• 2013

This study carried out a phytosociological research by Z.-M. school's method describing vegetation structure and management solution about nutmeg tree's(Torreya nucifera ) forests. The nutmeg tree's forests have developed intervale and hills in warm-temperate evergreen broad-leaved forests zone. The nutmeg tree's forests composed 50 familly, 80 genus, 88 species divided two syntaxa(typical sub-community, Arachniodes aristata sub-community) by species composition and correspond to habitat condition. The nutmeg tree's forests show a uniform forest's structure which composed 3~4 layer of sub-tree and shrub. And it was worthy of special mention which characterized diagnostic species of Camellietea japonicae in the warm-temperate evergreen broad-leaved forests. In case of forests floor, were a high rate in order of Ophiopogon japonicus, Polystichum tripteron, Arisaema ringens. And Oplismenus undulatifolius which represent mantle communities as well. This indicates that the nutmeg tree's forests are exposed by humman effects sustainedly. The nutmeg tree's young trees appeared a high rate at half shade and shade. The vigorous tree species have to spacing cutting instead of the heavy thinning that consist in with a shout of declining astructur and function of the forest ecosystem for maintaining a nutmeg tree's forests. And we suggest for the density regulation of the sub-tree and shrub. In conclusion, need to the continuous monitoring about the vegetation structure and management solution for the sustainable nutmeg tree's forests.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.203-222
• /
• 2011

The characteristics of flood damages have been increasingly strengthened and take the form of unpredictable and unusual weather phenomena caused by climate change and climate anomalies. To prevent inundation damage caused by breach of hydraulic structure such as dam or levee, and trouble of drainage of inner basin, the prediction necessity of flood inundation area, flood risk analysis, and drawing flood risk maps have been on the rise, and the national flood risk maps have been produced. In this study, the quantitative flood vulnerability analysis was performed, which represents population living within flood-affected areas, types of economic activities, facilities affected by flood, in order to extend flood risk mapping from simple hazard concept into risk based idea. By applying it to Nakdong River basin, the flood vulnerability indices were estimated to draw flood risk maps subdivided into administrative districts. The result of this study can be applied to establish the disaster prevention measures and priority decision of disaster prevention project.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.27-40
• /
• 1997

This study investigated the effects of laser irradiation on the exposed pulp and the possibility of direct pulp capping with the $CO_2$ laser. Results were obtained from the observation of the residual pulpal healing process. Class V cavities on 48 anterior teeth from 8 adult dogs were prepared and pulp chambers were intentionally opened with dental explorer. The control group consisted of 16 teeth. $Dycal^{(R)}$(Caulk Co., U.S.A.) was applied to exposed site once bleeding was stopped. Cavities were sealed with $I.R.M^{(R)}$. In the experimental group 1 (16 teeth), laser(LASERSAT $CO_2^{(R)}$, Satelec Co.) was irradiated on the exposed pulp. The laser procedure followed the manufacturers recommendations for the treatment of human pulp(1.5 Watts, 0.2 seconds, unfocused), and cavities were sealed with $I.R.M^{(R)}$. In the experimental group 2 (16 teeth), laser was irradiated on the exposed pulp in a more powerful dosage(5.0 Watts, 0.2 seconds, unfocused), and cavities were sealed with $I.R.M^{(R)}$. Two dogs were sacrificed immediately after experiment and the others were sacrificed at intervals of one, three, and eight weeks respectively. All teeth were routinely processed and the pulpal tissues and odontoblastic layers were observed by the light microscope. The results were as follows; 1. In the control group, the initial mild inflammation had improved to normal by week eight. An active formation of reparative dentin was observed at week three, and at week eight, a firm dentin bridge was present beneath the $Dycal^{(R)}$ with no inflammatory responses in the remaining pulp. 2. In the experimental group 1, immediately following irradiation, the superficial shape of the exposed pulp was crater-like. And it was lined with the coagulated layer, $60{\sim}70{\mu}m$ in width. Moderate inflammatory pulpal conditions existing at week one were improved to mild at week eight. And from the week three specimens, a reparative dentin formation was observed in the adjacent odontoblastic layer of the exposed site. A dentin bridge at the exposed site, however, did not form during the experimental period. 3. In the experimental group 2, the width of the coagulation layer lining the crater was $70{\sim}130{\mu}m$. Beneath the coagulated layer, severe inflammatory pulpal responses were observed at week one, and conditions did not improve during the experimental period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.205-212
• /
• 2020

The purpose of this study is to evaluate the validity of primary anterior zirconia crown made with Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technology by analyzing fracture strength and translucency parameter. Zirconia crown was designed with CAD software, using 3D scanned data of #61 tooth model. Crown fabrication was performed with CAM machine using zirconia block. Zirconia crowns were divided into 3 groups according to thickness(0.3, 0.5, and 0.7 mm), and fracture strength was compared with 1.0 mm thickness of resin strip crown. The compressive force was applied with universal testing machine at 30° along the incisal edge at increments of 1 mm/min. For translucency evaluation, 0.3, 0.5, and 0.7 mm thickness of zirconia specimens were fabricated and translucency was measured with spectrophotometer. Among zirconia groups, there was a significant increase in fracture strength as thickness increased (p < 0.05). The fracture strength of zirconia crown was significantly higher than resin strip crown in all groups (p < 0.05). Translucency parameter was highest in 0.3 mm group, and significantly decreased as thickness increased to 0.5 and 0.7 mm (p < 0.05). Thin primary anterior zirconia crown can be designed and fabricated according to individual needs by using CAD/CAM. Restoration with thin crown would reduce the amount of tooth reduction, risk of pulp exposure, and make more esthetic restoration possible.