• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.24-31
• /
• 2024

Mortar has been applied in most previous studies on 3D concrete printing. In such cases, however, the economic efficient cannot help decreasing due to higher binder contents and larger amount of fine aggregates. In order to enhance the applicability of 3D printing technology to construction industry, therefore, 3D concrete printing technology utilizing coarse aggregates needs to be developed further. This study aims at proposing the mix design process of concrete containing coarse aggregates for 3D printing. Based on extensive literature review and experimental studies, the mix proportion suitable for 3D printing has been derived, and the extrudability of concrete with coarse aggregates has been verified through 3D printing tests. The primary variable of the extrudability tests was the contents of viscosity modifying agent (VMA), and the extrudability was quantitatively evaluated by measuring dimensions, distribution of aggregates, and surface quality of 3D-printed filaments. The test results showed that the dimensional suitability and surface quality were improved as the VMA contents were larger, and the coarse aggregates were evenly distributed in the section of filament regardless of the VMA contents. Based on the test results, the mix design process for concrete containing coarse aggregates for 3D printing has been proposed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.907-911
• /
• 2010

최근 이상기후로 인한 홍수피해가 급증하고 있으며, 이에 대한 홍수피해 영향 및 대책 수립이 절실한 실정이다. 2006년 7월에 전국적으로 발생한 홍수가 대표적인 예이며, 월류에 의해 하천제방 붕괴되면서 제내지가 침수되는 피해를 입었다. 제방붕괴의 원인 중 대부분이 월류 및 침식에 의해서 발생하고 최근에는 월류에 의한 제방붕괴 피해가 증가하는 추세이다. 월류에 의한 제방붕괴는 계획홍수량을 초과하는 홍수에 의해 발생하므로, 수위가 높은 상태에서 제방이 붕괴됨에 따라 침식, 구조물에 의한 파괴, 제체불안정 등에 의한 피해보다 그 위험성이 크다. 따라서, 계획홍수량을 초과하는 홍수에 대한 대책의 마련이 시급한 실정이다. 이러한 측면에서 수퍼제방은 홍수에 대한 취약성이 큰 지역에 적용될 수 있는 구조물적 대책의 하나이며, 근본적으로 치수안전도와 부지 활용도를 높인다는 관점에서 적극적으로 고려해 볼 수 있는 대책이 될 수 있다. 본 연구에서는 수퍼제방의 도입 목적과 기능을 이해하고, 제반 안정성을 확보될 수 있는 공학적 설계방법에 대해 고찰함으로써 국내 여건에 적합한 수퍼제방 도입 방안과 수퍼제방 도입에 따른 시행착오를 최소화하기 위한 설계 고려 사항을 검토하였다.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.776-788
• /
• 2019

This study developed an ergonomic Korean female military winter jacket and (inner and outer) pattern in in order to increase dimension and operational suitability for military missions. First we developed the 1st development pattern and sample jackets with improved dimensions and operational suitability based on a previous investigation of fitness and motion suitability of Korean female military winter jackets (inner and outer) and motion suitability by a wearing test. The evaluation result of fitness for the 1st development pattern were over 4.0 (5.0 Likert scale) for both the inner and outer jacket, a positive result and the result of motion suitability were over 3.5 in both the inner and outer jacket except for the neck front part by collar height. However, we did not modify the collar height because decreases in warmth and military regulations. We also evaluated appearance by experts that showed good results in both the inner and outer jacket. Finally, we developed a final pattern based on evaluation results and military regulations. Existing military uniform research was conducted mainly on male soldiers. Beginning with this study, we expect to expand research on the development of military uniform patterns suitable for a female soldier body type.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.5
• /
• pp.695-702
• /
• 2015

This study provides basic data that are helpful to prepare a sizing system for dress shirts that improves the wearer's size fitness. The 16 different parts of the dress shirts were measured for 24 pieces of dress shirts with three kinds of size (95, 100 and 105) among the eight different brands on the market. The measurement sizes of the dress shirts analyzed the accuracy of the size information, size classification by size designation, and differences of size by brand. The results of the study were: 1. The size information of dress shirts differed from customer demand. 2. The size increments between size designations differed from each other even though measurement sizes of the dress shirts increased as the size designation increase. 3. Measurement sizes of the dress shirts were different between brands even for dress shirts of the same size designation. It is necessary that manufacturers secure an accurate and standardized sizing system and provide accurate information for the measurement sizes of dress shirts on an online shopping mall.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.3
• /
• pp.31-43
• /
• 2004

The purpose of this study is to provide basic data on the propriety of the ready-to-made garment sizes of the boys aged between 10 and 11. The data were collected from 315 boys in the capital area. They were surveyed during the period of April, 2004. Data analysis has been performed through descriptive statistics, $x^2$-test, t-test, ANOVA and Duncan test using SPSS ver.10. The results of the analysis are as follows. According to the result of investigating the favorite fashion style of boys, most boys aged between 10 and 11 preferred casual style(jean pants & T-shirts). Boys of age 10 preferred formal style and 11-year-old boys tend to prefer hip-hop style. When boys buy garments, boys aged between 10 and 11 were influenced by their mother or family. The store in which 10-year-old boys purchased their garments was either a children's or a sports wear store, and boys of 11 age prefer young casual wear store. The highest factors of dissatisfaction on buying garments were price and size. According to the result of evaluating fitting problems, the highest degree of dissatisfaction upon proper fitness upper-arm circumference, waist circumference and pants length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.943-961
• /
• 2018

This study was to develop an ergonomic Korean male military winter jackets (inner and outer) pattern. First, we developed a prototype pattern and sample jackets based on a previous investigation for fitness and motion suitability of Korean male military winter jackets and evaluated fitness and motion suitability by a wearing test. The evaluation results were positive with an over 3.0 (5.0 Likert scale) for both the inner and outer jacket. However, a relatively low score was shown in the sleeve length and collar front height at the inner jacket and shown in hem circumference, neck circumference, elbow and front neck at the outer jacket. Next, we developed the secondary pattern and sample jacket reflecting the prototype evaluation result and executed expert evaluation. The result showed that the ease amount was appropriate (except for the collar back height) and the appearance was good. Finally, we developed a final pattern that showed good results after evaluation at a Korean military army base.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.766-774
• /
• 2022

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.227-232
• /
• 2016

3D body scan data are used widely in various fields to make products and living spaces for superior human body fitness. Based on the 3D measurements of human bodies for teens in Size Korea 2013, this research provides a way of finding the representative body sizes and 3D body scan data. First, a multi-dimensional vector space consisting of many measurement items was projected onto a 2D vector space with circumference and length components via factor analysis. The representative body sizes and 3D scan data close to these values were obtained via the Mahalanobis distance in 2D space. Considering the adolescent growth pattern shown on this 2D space, males were divided into 4 age groups and females were divided into 3 age groups. Using the eigenbodies corresponding to the column vectors of the component score coefficient matrix, the representative body sizes of 13 measurement items (male) and 14 measurement items (female) for each age group were calculated. The representative body sizes and 3D scan data are very useful for modeling representative 3D human figures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.2006-2010
• /
• 2006

우리나라에서는 치수사업을 추진하기 위한 경제성 분석으로 간편법과 개선법을 사용하여 오다가 현재는 2004년도에 개발된 다차원법(다차원 홍수피해 산정방법(Multi-Dimensional Flood Damage Analysis))을 이용하고 있다. 다차원법은 도시와 농촌 등의 구분없이 일반적으로 이용할 수 있도록 개발되었다. 본 논문에서는 도시지역에 적합하도록 다차원법의 홍수피해산정 요소들을 보정하여 적용하고 다차원법과 비교하였다. 본 방법을 도림천의 지하방수로 사업의 비용-편익비를 산정하여 비교한 결과, 다차원법을 이용한 경우 5.51, 본 연구에서 제시한 비주거지역 자산과 공공시설물의 피해율을 이용한 경우는 6.75의 비용-편익비를 추정할 수 있었다. 이는 피해액 항목들중 공공시설물피해 항목에 의한 영향의 크기 때문인 것으로 판단된다.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.79-88
• /
• 2022

In order to develop a bodice prototype suitable for obese women in their 20s, this study compared and analyzed a total of five pattern system methods, including prototype of France and Japan, one prototype for education in Korea and two prototype for industries in Korea. Through this, this study attempted to investigate the bodice pattern system suitable for the development of plus-size women's clothing. For the pattern drafting, pattern 1 was applied with the most body dimensions such as interscye fold front, interscye fold back, bust circumference, neck circumference, and waist back length, and pattern 2, pattern 4, and pattern 5 were made based on bust circumference and waist back length. As a result of the appearance evaluation, Pattern 3 was evaluated as the best pattern in all items except for the suitability of the center front length and the suitability of the side waist circumference position. However, it was evaluated as inappropriate in items such as the vertical side line, the suitability of the side waist circumference line position, the suitability of interscye fold back position and shape, and the suitability of the back shoulder dart position. Most of the pattern drafting methods are based on the size of the bust circumference, but other institutional methods are considered necessary when setting the neck circumference and shoulder length for 20s obesity women. In addition, it is also required to develop a method for setting the front center length due to abdominal protrusion.