• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.353-357
• /
• 2000

A dimensioning system in a manufacturing process is often complex, especially when a lot of operations are involved in the process. Determination of operational dimensions and tolerances becomes even more complicated if there exist inconsistencies between operational and design relationships among operational dimensions in machining. This chart furnishes a record of the relationships in an easy-to-grasp form, proves that sufficient stock for a cut is available even under adverse conditions, and also proves that separate operations, when taken together, will harmonize as desired. In this paper, various existing roles of the chart have been extended to an operational routing sheet by generating it automatically, providing machining conditions, and verifying operational tolerances.

• Journal of Industrial Technology
• /
• v.5
• /
• pp.65-71
• /
• 1985

In case that the datums chosen for dimension on engineering drawings are unsuitable for manufacturing and inspecting and inspection purposes and it is necessary to redimension the design from new datum. L. E. Farmer presented a theory for performing this change of datum, discussed a procedure for allocating tolerances to new dimensions and presented the procedure of change of datum as part of a computer aided design system. This paper deals with the development of the interactive computer program which is insufficiently presented without all coding list of program by L. E. Farmer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.89-89
• /
• 2004

결정적인 알고리즘과 입력정보의 사용은 평가된 해석과 실제 시스템 값과의 차이로 잘못된 결론을 이끌지도 모른다. 실제 시스템은 대부분 각각의 입력 매개변수들(input parameters)과 관계된 넓은 공차 영역(tolerance band)을 가지고 있어서 입력정보로 하나의 단일한 값을 할당하는 것이 어렵다. 단일 입력에 대한 한가지 해는 변동의 이해 없이 제한된 값이라는 것을 인식할 필요가 있는데 대개 결정론적 설계는 형상과 관련된 치수변동, 항복강도나 부재의 밀도, 탄성계수와 같은 재료 물성치의 불확실성(uncertainty)과 시스템에 작용하는 하중의 변동 등을 직접 고려하지 않고 설계를 수행하기 때문에 수용할 수 있는 오차의 범위 안에서 시스템의 응답을 정확히 평가하기가 쉽지 않았다.(중략)

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.621-628
• /
• 2023

This study derived a reverse engineering procedure for verifying the design identity of original parts and developed parts for PMA(Parts Manufacturer Approval) and STC(Supplemental Type Certificate) of metal brake pads for transport aircraft, which are critical parts among aircraft parts and equipment. In Korea, the regulations for reverse engineering procedures are regulated by the Parts Manufacturer Approval Guidelines, and in the United States, AC No. 21. 303-4. In the reverse engineering for the brake pad, the detailed procedures for each component were determined by selecting verification test items to confirm identity based on sample quantity, dimensional tolerance, mechanical property measurement, material, weight and volume characteristics for each component. In addition, as a result of analyzing the regulation of Korea and United States, in the case of Korea, it is necessary to establish technical standards for braking systems for transport aircraft and regulations related to flight tests.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.689-692
• /
• 2010

일반형 자동차 내장부품은 외부가 플라스틱 사출 성형한 형태로 사용되지만, 고급 차종은 내장재의 미감이나 질감을 위하여 사출물 표면에 엠보싱 무늬가 형성된 표피재가 수지에 추가로 부착되어 제작된다. 부착하는 방법은 한 장비에서 저압 사출 후 플라스틱이 완전 응고 전에 표피재를 넣고 압입하는 저압 사출법과 표피재 수지를 기 사출된 제품위에 놓고 압착시키는 압착법이 있으나 이 두 방법 모두 엠보싱 무늬가 형성된 표피재를 넣고 작업하기 때문에 고온 압착시 기존 무늬가 찌그러지고 코너 부위가 경화되어 기존의 질감을 얻지 못하며, 치수 공차가 변형되어 불량률이 증가하므로 이를 시급히 개선할 새로운 제조 기술의 필요성이 대두된다. 본 연구는 가열 압착기로 지그 및 금형을 새로 개발하여 도어 트림 제조시, 기 사출물을 금형 쪽으로 기 조직을 삽입한 후 엠보싱 무늬가 없는 원소재 표피재로 상부 금형 쪽으로 소재조직을 진공으로 흡입하여 무늬를 성형한 후 하강시켜, 기 사출물에 압착시키는 가열 압착으로 엠보싱무늬의 손상을 방지하는 금형을 제안하였으며 그에 대한 해석, 설계, 실험을 통하여 성능을 평가 분석 하였다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.1
• /
• pp.21-31
• /
• 2003

Determination of operational dimensions and tolerances is complex if there exist inconsistencies between operational and design specifications. Dimension and tolerance charts (D&T charts) have been used to establish the relationships among operational dimensions in complex machining. This chart proves that individual operations can be harmonized when they are interconnected. However, it is hard to generate the chart manually. Because operational dimensions and tolerances must meet the design specifications, the dimensions and tolerances of interconnected operations have to be verified serially for economical operations. In this paper, the chart is automatically generated from the interconnected operations. More importantly, all operational dimensions and tolerances displayed in the chart have been verified by using LP to meet the design specifications. Finally, the chart is converted to an operational routing sheet that contains a detailed process plan along with cutting speed, feed rate, and operational references based on material hardness, surface finish, and tool nose radius.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.29-34
• /
• 2017

In this paper, we report a method of improving the productivity of lead wire fabricated through the rolling process by increasing its linear velocity. The most important point to consider when raising the linear velocity is that the original specifications must still be adhered to. In other words, the dimensional tolerance must be satisfied when increasing the linear velocity of the wire without causing cracks. However, if the linear velocity of the wire is increased, the degree of reduction must also be increased, which causes more damage to the wire and increases the load on its surface. Therefore, we studied a three step rolling process which can satisfy the specifications of the wire produced through the two step rolling process and improve the productivity. In this study, only the roll gap of the three-stage rolling roller is assumed to be a variable, while the other conditions are the same as the field conditions. In addition, through the PIANO (Process Integration, Design and Optimization) tool, the (optimum?) surface roughness and maximum stress are maintained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

The most critical rotating parts of a gas turbine engine are turbine blades and disc, given that they must operate under severe conditions such as high turbine inlet temperature, high speeds, and high compression ratios. Owing to theses operating conditions and high rotational speed energy, some failures caused by turbine disks and blades are categorized into catastrophic and critical, respectively. To maximize the margin of structural integrity, we aim to optimize the vulnerable area of disc-blade interface region. Then, to check the robustness of the obtained optimized solution, we evaluated structural reliability under uncertainties such as dimensional tolerance and fatigue life variant. The results highlighted the necessity for and limitations of optimization which is one of deterministic methods, and pointed out the requirement for introducing reliability-based design optimization which is one of stochastic methods. Thermal-structural coupled-filed analysis and contact analysis are performed for them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.482-489
• /
• 2020

This study conducted a prototype development and evaluation by performing die-casting mold design, mold manufacturing, and injection condition optimization based on flow and solidification analysis to meet the needs of the coupling parts produced by die casting. Through flow analysis, the injection conditions suitable for 100% filling in the cavity were found to be a molten metal temperature of 670 ℃, injection speed of 1.164 m/s, and filling pressure of 6.324~18.77 MPa. In addition, solidification close to 100 % occurred in all four cavities when the solidification rate was 69.47 %. A defect inspection on the surface and inside the product revealed defects, such as poor molding and pores. In addition, the dimensions of the injected product were within the target tolerance and showed good results. Through the feedback of the results of flow and solidification analysis, it was possible to optimize the mold design, and the injection optimization conditions were confirmed to be a total cycle time of approximately 6.5 seconds. Good quality carrier parts with an average surface hardness of approximately 45 mm from the gate measured at 97.48(Hv) could be produced.