• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.453-463
• /
• 1995

Most commonly used axis for central incisors in lateral cephalometric radiographs is the line connecting root apex and incisor edge. However, crown axis and root axis do not always coincide in cases of malocclusion patients. The angle created by these axis are called the collum angle, which should be considered in orthodontic diagnosis and treatment. In this study, 31 Class I malocclusion, 30 Class II division 1 malocclusion, 31 Class II division 2 malocclusion, and 31 Class m malocclusion patients were selected and their collum angles were measured. Correlation between these angles and malocclusions was investigated, and the correlation analysis with other parameters in cephalometrics was done. The results were as follows ; 1. The mean collum angles according to the types of malocclusions are ; $3.11^{\circ}{\pm}3.54^{\circ}$ for Class I, $1.23^{\circ}{\pm}2.41^{\circ}$ for Class II division 1, $3.77^{\circ}{\pm}4.39^{\circ}$ for Class II division 2, and $3.90^{\circ}{\pm}4.08^{\circ}$ for Class III malocclusion. 2. Statistically significant differences in collum angles were noted between Class II division 1 group and Class II division 2 and Class III group. 3. Significant correlations were found between collum angles and other parameters used in cephalometrics, namely IMPA for Class I, Wits for Class II division 1, Overbite for Class II division 2 and for ClassIII.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.537-549
• /
• 1998

The purpose of this study was to evaluate the influence of root resection and retrograde cavity preparation methods on the apical leakage in endodontic surgery. To investigate the effect of various root resection and retrograde cavity preparation methods on the apical leakage, 71 roots of extracted human maxillary anterior teeth and 44 mesiobuccal roots of extracted human maxillary first molars were used. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. Three millimeters of each root was resected at a 45 degree angle or perpendicular to the long axis of the tooth according to the groups. Retrograde cavities were prepared with ultrasonic instruments or a slow-speed round bur, and occlusal access cavities were filled with zinc oxide eugenol cement. Three coats of clear nail polish were placed on the lateral and coronal surfaces of the specimens except the apical cut one millimeter. All the specimens were immerged in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using two-way ANOVA and Duncans Multiple Range Test. The results were as follows: 1. No statistically significant difference was observed between ultrasonic retrograde cavity preparation method and slow-speed round bur technique, without apical bevel (p>0.05). 2. Ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, with bevel (p<0.0001). 3. No statistically significant difference was found between beveled resected root surface and non-beveled resected root surface, with ultrasonic technique (p>0.05). 4. Non-beveled resected root surface showed significantly less apical leakage than beveled resected root surface, with slow-speed round bur technique (p<0.0001). 5. No statistically significant difference in apical leakage was found between the group of retrograde cavity prepared parallel to the long axis of the tooth and the group of one prepared perpendicular to the long axis of the tooth (p>0.05). 6. Regarding isthmus preparation, ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, in the mesiobuccal root of maxillary molar, without bevel (p<0.0001).

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.240-251
• /
• 2008

Objective: The purpose of this study was to evaluate the effect of head position changes on the root parallelism between adjacent teeth on panoramic radiographs. Methods: A model with normal occlusion was constructed in the SolidWorks program, then RP (rapid protyping) model was fabricated. The model was repeatedly imaged and repositioned five times at each of the following nine positions: ideal head position, $5^{\circ}$ up, $10^{\circ}$ up, $5^{\circ}$ down, $10^{\circ}$ down, $5^{\circ}$, right, $10^{\circ}$, up, and $5^{\circ}$ right rotation, $10^{\circ}$ right rotation. Panoramic radiographs were taken by Planmeca ProMax and the angle between the long axes of adjacent teeth was directly measured in the monitor. Results: Axes of adjacent teeth tended to converge toward the occlusal plane when the head tilted up and converged in the opposite direction to the occlusal plane when the head tilted down. Anterior teeth showed the most notable differences. When one side of the head tilted up $5^{\circ}$ and $10^{\circ}$ along the anteroposterior axis (Y axis), tooth axes of the same side tended to converge toward the occlusal plane and tooth axes of the opposite side tended to converge in the opposite direction to the occlusal plane. When the head rotated to one side along the vertical axis (Z axis), the canine and lateral incisor of the same side converged in the opposite direction to the occlusal plane and the canine and lateral incisor of the other side converged toward the occlusal plane. Conclusions: When assessing the root parallelism on panoramic radiographs, the occlusal plane cant (anteroposterior or lateral) or asymmetry of the dental arch should be considered because these can cause distortion of tooth axes on panoramic radiographs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.256-261
• /
• 2000

Trauma to the tooth is the most common accidents in pediatric dentistry and tooth fracture occurs frequently. Fracture is classified into crown fracture, root fracture, and crown-root fracture which involves both. Also, it is classified into simple or complicated fracture depending on whether the pulp is exposed or not. When the fracture is extended down to the subgingival level following the long axis of the root, or when more than 1/3 of the root is involved, extraction is the primary treatment. But alternative treatment such as extruding the root fragment with orthodontic force and restoring it, or intentionally extracting the tooth and replanting it to a position which it can be restored. This is a case report on intentional replantation of a traumatized maxillary central incisor with crown-root fracture of a patient with mixed dentition. The teeth was extracted and immediate endodontic treatment, retrograde filling and resin restoration were carried out.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.435-441
• /
• 2002

Surgical microscrews were introduced and used as one method to provide absolute anchorage. Some clinicians implanted microscrews or miniscrews into the basal bone below the roots of the teeth to evade damage to the roots. Because the implanted microscrews were positioned too low the applied force was insufficient to retract the anterior teeth or protract the posterior teeth, and the use of microscrews or miniscrews seemed limited in applying vertical force. However Park implanted microscrews(micro-implants (1.2mm in diameter)) into the alveolar bone between the roots of the posterior teeth to change the direction of the applied force toward increasing horizontal component of the force. Moreover, these microscrew implants were positioned in the alveolar bone between the roots without causing discernable damage to the roots. This study was performed to provide guidelines and anatomic data to assist in the determination of the safe location for micro-implants. By measuring the CT images from 21 patients, anatomical data were obtained which were then used as a guide to determine the location for the implantation of micro-implants. The thickness of the cortical bones at the alveaolar bone region increased from the anterior to the posterior teeth area. The mandibular posterior teeth area showed thicker cortical bone. A greater distance was observed in distance between the second premolar root and first molar root in the upper arch, between the first molar root and the second molar root in the lower arch. The alveolar bone of the posterior teeth area is considered the best site for the implantation of micro-implants.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.515-524
• /
• 1998

The purposes of this study were to observe the cavity wall morphology and to evaluate the degree of cavity cleanliness when root-end retrograde cavity preparation was done with ultrasonic diamond instruments. To observe the morphology of retrocavity and to evaluate the degree of cavity cleanliness. root-end resections were done on 20 palatal roots of extracted maxillary first molars after canal filling with gutta-percha. Retrocavities were prepared using either ultrasonic diamond instruments or stainless steel ones of medium power setting of level 6 ($Miniendo^{TM}$, EIE, CA, U.S.A.). Morphology of the cavity. degrees of the remaining canal debris and smear layer were evaluated under the scanning electron microscope. The results were as follows: Cavities prepared with ultrasonic diamond instruments showed scratched appearance of wall, while ultrasonic stainless steel preparation showed hatcheted appearance. Ultrasonic diamond instruments induced more smear layer than stainless steel ones did (p<0.01) in the cavity. However, there was no significant difference in canal debris (p>0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.88-94
• /
• 2020

Purpose: The purpose of this study was to analyze the sagittal root position of maxillary anterior teeth and report the frequency of each classification in Korean for immediate implant placement. Materials and Methods: A retrospective review of cone-beam computed tomography (cone-beam CT) images was conducted on 120 patients (60 male and 60 female) who fulfilled the inclusion criteria. After reorientation of the axis, cone-beam CT images were evaluated and the relationship of the sagittal root position (SRP) of the maxillary anterior teeth to its associated osseous housing was recorded. Class I, II, and III were classified respectively when the root was positioned on the labial, central, and palatal aspect of the alveolar bone. Class IV was the position that at least two thirds of the root is engaging both the labial and palatal cortical plates. Then, the angulation of the root axis and the alveolar bone axis was measured. Descriptive statistics and Kruskal-Wallis test were used to compare the angulation according to the root position and SRP class. Results: The frequency distribution of sagittal root position of maxillary anterior teeth indicated that 81.1%, 10.3%, 1.9%, and 6.7% were classified as Class I, II, III, and IV, respectively. The sagittal angulation at approximately 77.5% of central incisor, lateral incisor, and canine was < 20 degrees, but the angle at more than 42.7% of canine was ≥ 20 degrees. Within the class, the angulation was statistically significantly greater in Class I (16.19) compared to Class II (8.72) and Class III (9.93), and smaller in Class IV (3.79). Conclusion: Within the limitation of this study, a majority of the maxillary anterior roots were positioned close to the buccal cortical plate. However, some roots have very thin alveolar bone and sagittal angulation larger than 30 degrees. Therefore, cone-beam CT analyses of the sagittal root position and the sagittal angulation are recommended for the selection of the appropriate dental implant treatment approach.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.48-55
• /
• 1968

1958년(年) Fullmer와 $Lillie^9$에 의(依)하여 최초(最初)로 보고(報告)된 Oxytalan 섬유(纖維)는 산(酸)에 내성(耐性)이 강(强)한 섬유(纖維)로 치근막(齒根膜)에 많이 출현(出現)하고 기계적(機械的) 자극(刺戟)에 의(依)하여 배열(配列), 주행(走行) 및 수적(數的)인 변화(變化)를 가져온다. 저자(著者)는 교정력(矯正力)을 이용(利用)하여 치아(齒牙)를 이동(移動) 시킨후(後) 치근막내(齒根膜內) Oxytalan섬유(纖維)의 수(數), 주행(走行) 및 형태(形態)의 변화(變化)를 실험적(實驗的)으로 관찰(觀察)한바 있어 이를 보고(報告)하는 바이다. 본연구(本硏究)에 사용(使用)된 실험동물(實驗動物)로는 체중(體重) 60gram내외(內外)의 자성백서(雌性白鼠) 15마리를 택(澤)하였다. 각동물(各動物)은 Ether마취후(麻醉後) 교정용(矯正用) 고무줄편(片)을 상악우측(上顎右側) 제1구치(第一臼齒)와 제2구치(第二臼齒) 사이에 삽입(揷入)하여 24, 48, 72시간(時間) 간격(間隔)으로 관찰(觀察)하였다. 동물(動物)을 도살후(屠殺後) 상악골(上顎骨)을 적출(摘出)하여 10%중성(中性) 호루마린에 고정후(固定後) 3%의산(蟻酸)으로 탈회(脫灰)하였다. 파라핀 포매후(包埋後) 근원심적(近遠心的)으로 $4{\sim}6{\mu}$의 절편(切片)을 만들어 Hematoxylin-eosin 및 Aldehyde fuchsin염색(染色)을 시행(施行)하여 경험(鏡險)한 결과(結果)는 하기(下記)와 같다. 1. 치아이동후(齒牙移動後) 교원성섬유(膠原性纖維) 및 Oxytalan섬유(纖維)들의 배열(配列)에 있어 뚜렷한 차이(差異)를 보였다. 2. 치아이동후(齒牙移動後) 사주섬유(斜走纖維)는 염박측(壓迫側)에서는 치아장축(齒牙長軸)에 수직(垂直)되게, 견인측(牽引側)에서는 평행(平行)되게 주행(走行)하고 있었다. 3. 48시간군(時間群)에서 세포증식(細胞增殖)이 심(甚)하였다. 4. Oxytalan섬유(纖維)는 치아(齒牙)들에 교정력(矯正力)을 가(加)한후(後) 견인(牽引) 염박(壓迫) 양측(兩側) 공(共)히 수(數)가 증가(增加)하였다. 5. 염박측(壓迫側)에서 Oxytalan섬유(纖維)는 속(束)을 형성(形成)하며 치아장축(齒牙長軸)에 평행(平行)되게 주행(走行)하였다. 6.견인측(牽引側)에서는 하나 또는 두세개의 섬유(纖維)들이 산발적(散發的)으로 치아장축(齒牙長軸)에 평행(平行)되게 하였다. 7. Oxytalan섬유(纖維)의 수(數)는 염박측(壓迫側)에서 보다 견인측(牽引側)에서 더 변화(變化)가 많았다.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.536-545
• /
• 1997

The purposes of this study were to evaluate the degree of cavity cleanliness and to observe cavity wall morphology when root-end retrograde cavity preparation was done with ultrasonics. Root resections were done on 20 extracted human maxillary central incisors after canal filling with gutta-percha, and retrocavities were prepared using a slow-speed round bur as a control, and stainless steel ultrasonic tips of power settings of 2 and 6 ($Miniendo^{TM}$, EIE, SA, USA) as experimentals. The degree of the remaining cavity debris and smear layer, and wall morphology were evaluated under the scanning electron microscope. The results were as follows : Cavity prepared with ultrasonics of either power setting showed significantly less smear layer than did slow-speed preparations (p<0.01). However, there was no significant difference in canal debris (p<0.05). Cavity prepared with ultrasonics showed hatcheted appearance of wall, while slow-speed preparation showed relatively plain one.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.543-549
• /
• 2000

Gutta-percha와 근관sealer를 사용한 근관 충전은 가장 많이 이용되고 성공률이 높은 방법이지만, 현재 사용되는 모든 근관sealer는 미세누출을 나타낸다. 따라서 더 효과적인 근관 폐쇄를 이루기 위한 재료 및 방법들이 연구되어왔다. 이중 상아질 접착제는 근관 충전재와 함께 사용되어 미세누출을 감소시키지만, 근관 내에 사용하기에 술식이 복잡하고 기술이 요구된다. 본 연구의 목적은 gutta-percha와 레진계 근관 sealer로 충전한 근관에서 self-etching primer를 미리 도포한 경우와 도포하지 않은 경우의 치근단 미세누출을 비교하고, self-etching primer를 도포함에 있어 근관 내에 적용하는 방법에 따른 미세누출을 비교하는 것이다. 또한 근관sealer와 상아질 계면을 주사전자현미경으로 관찰하여, 이 결과를 미세누출과 관련시켜보고자 하였다. 36개의 발거된 사람의 단근치에서 치관부를 절단, 제거하고 ProFile로 근관 형성한 후, 무작위로 선택하여 4개의 군으로 분류하였다. 1군에서는 주사기와 30게이지 주사 바늘로 self-etching primer를 근관 내에 적용하였고, 2군에서는 self-etching primer를 paper point에 적셔 근관 내에 적용하였다. 3군에서는 self-etching primer를 적용하지 않았다. 1, 2, 3군의 치아를 gutta-percha와 AH26 sealer를 사용하여 continuous wave 충전법으로 충전한 후 치근단공 주위 3mm를 제외한 치근변에 nail polish를 2회 도포하였고, 4군(음성 대조군)은 치근면 전체에 도포하였다. 1군과 2군에서 각각 2개의 치아는 주사전자현미경적 관찰을 위해 준비하였다. 모든 치아를 Methylene Blue 수용액에 48시간동안 침적, 수세한 후 치아 장축에 평행하게 양분하여 10배의 실물확대현미경 하에서 치근단 색소 침투를 관찰하였다. Self-etching primer를 도포한 군과 도포하지 않은 군 사이에는 평균 미세누출량에 유의한 차이가 없었다. 주사 바늘로 적용한 군과 paper point로 적용한 군 사이에도 평균 미세누출량에 유의한 차이가 없었다. 상아질과 근관 sealer계면의 주사전자현미경 관찰 결과 일부분에서 긴밀한 접착 관계를 나타내었고, 다른 부분에서는 간극을 나타내었다.