• The korean journal of orthodontics
• /
• v.40 no.6
• /
• pp.373-382
• /
• 2010

Objective: The purpose of this study was to assess the dentoalveolar compensation in facial asymmetry individuals using an integration of a CBCT image and a laser scanned dental cast image. Methods: The subjects consisted of 30 adults with asymmetric mandibles and 20 adults with symmetric mandibles. The CBCT and laser scanned dental cast images were integrated with a registration technique. Canine and first molar position and angulation were assessed from reference coordinates. The differences between deviated and non-deviated sides were analyzed with the paired t-test. The differences shown according to menton deviation were also statistically analyzed using Pearson correlation analysis. Results: The experimental group showed deviated and non-deviated side differences (dev.-ndev.) in the position and angle of the canine and first molars. Menton deviation showed positive correlation with the deviation side (dev.-ndev.) for the maxillary and mandibular 1st molar angles, negative correlation with the deviation side for the vertical position of the maxillary 1st molars, transverse position of the mandibular canine, transverse position and vertical position of the mesio-lingual cusp of the mandibular 1st molars. Conclusions: The upper and lower canine and first molars of facial asymmetry individuals were compensated, so the transverse position, vertical position, and angle showed differences between the deviated/non-deviated sides.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.275-291
• /
• 2002

Of various factors indicated for effective use of straight wire appliances, there was a great lack of studies both domestic and international about the curvatures of tooth crowns. This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth. For this study, three-dimensional laser scanning was performed on 36 dental casts with normal anatomic structures. Andrews plane and Facial axis of clinical crown (FACC) were designated as horizontal and vertical reference planes respectively. 2 or 3 lines, 1mm apart, were drawn superior, inferior, left and right of these reference planes. A three-dimensional coordinate table was made for points formed by crossing these lines, and averages of each coordinate point on the 36 dental casts were obtained. The curvature equation was made using three-dimensional coordinate points (x,y,z) and by this curvature equation, the curve ratio of each tooth was obtained. Curve ratio changes of each section of teeth were calculated by curve ratios of simplified curves. These two dimensional curves were simplified horizontally and vertically Conclusions for this study are as follows. 1. The basic data of labial and buccal clinical crown curvatures were obtained about Korean permanent teeth. 2. No significant difference was found between male and females. 3. Individual tooth characteristics 1) In maxillary central incisors, the difference in the curve ratio between the gingival and incisal sides was greater than for the other teeth. And the gingival side showed a greater curve ratio. 2) Maxillary canines showed more curvatures in the mesio-occlusal surface than the other surfaces. 3) In maxillary $1^{st}$ premolars, more curvatures were found in mesio-occlusal and disto-gingival surface, thus showing a twisted crown surface, but in maxillary $2^{nd}$ premolars, the crown curvatures of mesial and distal ends became parallel to each other. 4) No significant difference in crown curvatures was found between mandibular central and lateral incisors. 5) Occluso-gingival curvatures of mandibular$2^{nd}$ premolar turned out to be more rounded than mandibular $1^{st}$ premolars or maxillary $2^{nd}$ premolars. From the above conclusions, it can be deduced that the same bracket bases can be used for mandibular central and lateral incisors. But for maxillary $1^{st}\;and\;2^{nd}$ premolars and for mandibular $1^{st}\;and\;2^{nd}$ premolars, because crown curvatures showed significant differences, when making bracket bases there is ample reason to make bracket base curves differently for each type of tooth.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.265-274
• /
• 2002

Among many maturation indicators of growing patients, menarche and skeletal maturity are useful to assess growth and development, and the changes of the first and third finger are relatively important in hand-wrist X-rays. The objective of this study was to evaluate the relationship between menarche and the changes of the phalanx of the first and third finger and compare skeletal maturation among different malocclusion types. The sample used in this study was 29 Class 1,27 Class II and 27 Class III females whose hand-wrist X-rays had been taken with 6 month interval before the appearance of ulnar sesamoid ossification till the phalanges of the fingers were almost fused. The results were as follows. 1. There was no skeletal maturity difference among malocclusion types. 2. There was no difference in the mean chronologic age of menarche among different malocclusion types and that was $12.30\pm0.98$ years. 3. The ulnar sesamoid was observed at $10.35\pm1.01$ years, and on distal phalanx of the first finger, epiphyseal capping appeared at $11.26\pm1.04$ years and fusion at $13.12\pm1.06$ years. The epiphyseal capping on middle phalanx of the third finger was observed at $11.57\pm1.02$ years and fusion at $13.72\pm1.04$ years. 4. The timing of menarche occurred around the same time as the fusion process of distal phalanx of the first finger(p<0.001, r=0.82) and the initiation of fusion of middle phalanx of the third finger(p<0.001, r=0.78). Therefore, we can give the aid when we evaluate the growth and development of growing females seeing the changes at phalanx of the first and third finger.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.569-586
• /
• 1994

The purpose of this study is to investigate the effect of loss of incisal function on the thickness, growth activities, ultrastructure of the condylar cartilage and on the muscle fibers of masseter superlicialis, anterior belly of digastric muscle in the growing rats. 37 day-old-rats of which incisors had been trimmed every day received soft diet from weaning and were studied by the autoradiography, electron microscopy and muscle histochemistry. The results obtained were as follows : The thickness of the fibrous, proliferative layer in superior, posterosuperior portion of the condylar cartilage was significantly(p<0.01) reduced in experimental groups and the decrease rate of fibrous layer thickness was greater in posterosuperior portion than in superior portion of cartilage and was greater than in proliferative layer. In normal group, more cells of posterosuperior portion moved more rapidly towards the medullary cavity. In experimental group, the labelling index of posterosuperior portion was decreased in proliferative layer at 2 hours, in transitional layer at 1, 2 days, in hypertrophic layer at 4 days after injection relative to posterosuperior portion of control group. But labelling index of superior portion was not different from that of control group at all time course after injection. From the muscle histochemistry, the diameter of type IIB fibers in masseter superficialis muscle, type IIA, type IIB fibers in anterior belly of digastric muscle decreased significantly(p<0.01) relative to controls in experimental group. From electron microscopic study, in the fibrous layer of the posterosuperior portion of condylar cartilage in normal group, many fibroblast like cells near the joint cavity showed extensive remodelling activities in ultrastructure. There was no morphological changes between experimental and control group in all cartilage cell layers of superior portion but cells near the joint cavity in fibrous layer of posterosuperior portion of experimental group showed morphologically inactive state relative to control group.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.743-760
• /
• 1997

This study was done to evaluate the correlations between the size, the form of the cranial base, head posture and the horizontal and vertical position of craniofacial structures. For this purpose, 100 cephalometric radiographs were taken from the sample composed of 51 male and 49 female, 12 measurement criteria and 37 reference points were established and digitized, then calculation was performed for the values of measurement variables and the horizontal and vertical position of reference points. The correlations be4ween them were analyzed statistically and mean facial diagrams were constructed and compared with the selected groups which were composed of 10 Samples each as large and small group from the measurement value. The following results were obtained: 1. The angles n-s-ba and n-s-ar as variables for the ion of cranial base correlated highly to the horizontal and vertical position of reference points in the cervical column with statistical significance($0.1\%$ level). 2. The angles n-s-ba and n-s-ar as variables for the form of cranial base correlated to the horizontal position of the reference points in the facial structure with statistical significance($1\%$ level), but not to the vertical position of them($5\%$ level). 3. The length n-s, s-ba, and n-ar as variables for the size of cranial base were correlated th the position of craniofacial structures in various ways, but in general, highly correlated to the horizontal and vertical position of midfacial structures around the teeth and alveolar area. 4. the angle NSL/CVT and NSL/OPT as postural variables tot the inclination of cranial base and cervical column were correlated to the horizontal position of the craniofacial structures with statistical significance($1\%$ level), but not to the vortical position of them($5\%$ level). 5. The angle OPT/HOR and CVT/HOR as postural variables lot the inclination of cranial base and true horizontal line were not correlated to the horizontal and vertical position of the craniofacial structures with statistical significance($5\%$ level). 6. The correlation between the measurement variables and horizontal and vortical positions of the reference poits in soft tissue were shown as similar to the related hard tissue points.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.801-813
• /
• 1997

A comparative study was made on the chewing movements of normal occlusion and skeletal class m malocclusion. Thirty normal occlusion subjects and twenty skeletal class III malocclusion patients were given chewing gums for the study : using BioPAK system, the chewing movement on the frontal plane was recorded and analyzed. With a typical chewing path chosen representing each subject, chewing width, opening distance, opening and closing angles, maximum opening and closing velocities were observed. Seven characteristic patterns were classified based on the types of chewing paths. The followings are the results : 1. Compared with the normal occlusion group, the skeletal class III malocclusion group showed more varied and vertical chewing patterns. 2. In comparision of chewing widths, skeletal class m malocclusion group showed narrower path than the normal occlusion group(p<0.01). 3. In opening distance, skeletal class III malocclusion group appeared shorter than the normal occlusion group without statistical significance(p>0.05). 4. In opening and closing angles, skeletal class III malocclusion group showed more acute angles than the normal occlusion group(p<0.01). 5. In maximum opening and closing velocities, skeletal class III malocclusion group was slower than the normal occlusion group but with no statistical significance(P>0.05). 6. In the classification of chewing movement pattern, the normal occlusion group had Type II as the highest rate at 73.4% ; in skeletal class III malocclusion group, the highest rate was Type III at 35.0%, followed by Type II at 30.0% 7. In the classification of chewing movement pattern, Type IV(chopping type)of skeletal class III malocclusion group showed a higher rate with 25.0% over 3.3% of normal occlusion group.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.853-864
• /
• 1997

The evaluation of growth potency can be done with many physiologic indicators. It has been well known that skeletal maturity has a close relation with both sexual maturity and somatic maturity, but the correlation between skeletal maturity and dental maturity was believed to be less certain. But, recent studies show that specific teeth, including lower canines, present close correlations with skeletal maturity. So, in this study, we studied hand-wrist X-ray films and orthopantomograms of 387 Korean boys and girls aged from 7 to 15; the purpose was to determine skeletal and dental maturity, and to find out a new method to estimate individual skeletal maturity using multiple-regression model, without the help of hand-wrist X-ray film. As a result of this study, followings were observed. 1. The following multiple-regression model can estimate skeletal maturity index (SMI) with 84% of accuracy, and regression coefficient of chronologic age, sex and lower canine show statistical significance. SMI = 0.60 x chronologic age - 1.67 x sex$^{**}$ + 0.88 x lower canine$^{*}$ - 0.05 x lower 2nd molar$^{*}$ - 10.3 $^{*}$ : mean age corresponding each developing stage, $^{**}$ : male=1, femal=0 2. The following multiple-regression model can estimate skeletal age with 87% of accuracy, and regression coefficient of chronologic age, sex and lower canine show statistical significance. Skeletal age = 0.75 x chronologic age - 0.55 x sex$^{**}$ + 0.71 x lower canine$^{*}$ - 0.09 x lower 2nd molar* -5.77 $^{*}$ : mean age corresponding each developing stage, $^{**}$ : male=1, femal=0

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.683-696
• /
• 1997

Recently several growth factors such as $TGF-{\beta}1$, $TGF-{\beta}1$, PDGF, bFGF are known to play an important role in scar formation following adult tissue injury. But there is little known about the role of growth factors in fetal tissue healing without scar formation. Therefore the purpose of this study is to investigate the distribution of growth factors which we involved with scar formation in the artificially created cleft lip wound healing of fetuses. The author had undergone hysterotomy and created cleft lip-like defects on fetuses of New Zealand White Rabbit in mid-third trimester (24 days). Fetuses were divided into 3 groups (the repaired group, the unrepaired group and the sham-operated control group). At 1, 2, 3, 5, 7 days after procedure, the repaired, the unrepaired and the control groups were obtained by Caeserean section. After documenting the viability of fetuses, fetuses were photographed to compare size and facial morphology and sectioned for histological examination by H & E stain and spatial and temporal deposition of $TGF-{\beta}1$, $TGF-{\beta}2$, PDGF, bFGF by immunohistochemical method. The findings are summarized as follows 1. There were lack of inflammation and scar formation and neovascularity in the repaired and the unrepaired group during experimental periods. 2. The reepithelialization of the unrepaired group was slower than that of repaired group. 3. There were no differences of distribution of bFGF in the control, the repaired and the unrepaired group. 4. PDGF was increased at post-op. first and second day and decreased after post-op. third day. Eventually, there were no differences in the control, the repaired and the unrepaired group. 5. $TGF-{\beta}1$ and $TGF-{\beta}2$ were slightly increased at post-op. first and second day and decreased after post-op. third day. Eventually there were no differences in the control, the repaired and the unrepaired group. And $TGF-{\beta}2$ is more densely stained than $TGF-{\beta}1$.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.697-709
• /
• 1997

This study was designed to investigate the stress intensity and distribution produced by 1mm activation of retraction archwire with $0^{\circ},\;7^{\circ},\;14^{\circ}$ torque and application of high polk J-hook headgear during retraction of four maxillary incisors using the photoelastic stress analysis. The photoelastic model was made with a PL-3 type epoxy resin which was substituted by alveolar bone portion. Each retraction archwire was fabricated from .020' X .025' stainless steel wire which had vertical loops in 7mm height and hooks for high pull J-hook headgear between central and lateral incisors. The high pull J-hook headgear was applied 35 degree backward and upward to occlusal plane with 200gm pet each side The findings of this study were as follows: 1. In case of $0^{\circ}$ torque, the stress was distributed from cervical 1/8 to apex of roots of central and lateral incisors which were the forms of arc mode. When the high pull J-hook headgear was applied, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. The stress between apecies of central and Lateral incisors was presented also. 2. In case of $7^{\circ}$ torque, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented mote apically than without headgear. The stress between apecies of central and lateral incisors was presented also. 3. In case of $14^{\circ}$ torque, the stress distributed by following the root surface was Presented from alveolar crest to apex of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented stronger than without headgear The stress between apecies of central and lateral incisors was presented also.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.553-563
• /
• 2000

Horseshoe Expander is one of Slow Maxillary Expansion(SME) which aims to accommodate the contra- lateral expansion and midpalatal suture expansion or the palate. The appliance consists of skeleton type strew embedded in split Horseshoe appliance. It is the objectives of the presentation to manifest the changes in dental & craniofacial components subsequent to the application of Horseshoe Expander. The subjects for this study consisted of 32 patients (mean age : 12.7). frontal, lateral cephalometric headfilm were taken and study casts were fabricated before and after expansion. 24 items were measured, compared preexpansion with postexpansion. Especially, palatal volume was measured by means of 'Hydro-measurement method'. Tooth axis measurement on the dental casts were made with Universal bevel protractor, and Horseshoe Expander group were compared with RME group. This study of changes to maxillary expansion with Horseshoe Expander revealed the following significant results. 1. Triangular-shaped expansion pattern appeared in frontal cephalometric headfilm. 2. Palatal plane, occlusal plane, mandibular plane and upper incisor to FH increased in lateral cephalometrir headfilm. 3. Palatal volume increased significantly. A slight bite opening, reduction of occlusal contact points showed in dental casts. 4. A 2.2:1 ratio of the amount of intermolar width in maxilla(orthodontic movement) to maxillary width (orthopedic movement) was determined. 5. Horseshoe Expander group has less buccal tipping tendency than RME group, by taking high correlation coefficients in the upper second premolar and first molar. It was suggested that Horseshoe Expander showed less orthodontic changes, less buccal tipping tendency. In addition, it was effective in maxillary expansion.