• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.119-127
• /
• 1997

The configuration of mandibular symphysis is likely to be dependent upon the genetic predeterminants and/or compensatory adjustments onto functional demands. The interrelation of morphological distinctives of symphysis in conjunction to the craniofacial skeleton had been scarcely anecdotal, therefore, the objective was to determine the correlation of morphological modifications between the mandibular symphysis and craniofacial complex. Lateral cephalometric headfilms of 212 subjects were employed for the conventional measurements. The proportion of chin height against chin depth length was referred as chin ratio, then, Low Symphysis (IS) and High Symphysis (HS) groups were turned out by means of the chin ratio. These samples yielded 35 in LS and 35 in HS groups. The data per capita were statistically analyzed and the following results were drawn ; 1. Overall characteristics of the craniofacial skeleton in HS group manifested hyperdivergence and LS group showed hypodivergence. 2. Gonial angle increased as chin ratio increased and was highly correlated to the chin ratio. 3. The chin ratio presented high correlation to the vertical face height, especially in terms of the chin height to anterior face height and the chin depth to posterior face height. 4. The morphological configuration of chin was hardly correlated with hyoid bone position.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.45-54
• /
• 1997

The purpose of this study was to evaluate the indications of bionator in Class II division 1 malocclusion, The 48 subjects were classified into good result group(group1) and poor result group(group2) in reference to posttreatment molar relation, posttreatment overbite and overjet, posttreatment profile, and relapse. Pretreatment lateral cephalograms were calculated and evaluated by t-test stepwise discriminant analysis. The results were as follows ; 1. In jaw bone relationship, ANB, facial convexity angle, AB to facial plane angle were significantly different between two treatment groups. In denture pattern, L1 to facial plane, L1 to A-Pog, FMIA, and U1 to facial plane were significantly different and m soft tissue profile, protuberance of lower lip and upper lip were significantly different between tw o treatment groups. 2. The results in according to discriminant analysis stated that L1 to facial plane, ANB, FMIA and protuberance of lower lip help prediction of treatment result of bionator. 3. 3 major influential variables were obtained by stepwise discriminant analysis - L1 to facial plane, articular angle and ANB difference. And Fisher discriminant function was made by these three major variables.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.35-44
• /
• 1997

mastication is basically regulated by central pattern regulalor(CPG) of brain system, target organ output from CPG is modulated by oral sensory feedback, anterior cross bite pattern infuluence the feedback mechanism and change muscle activity and jaw movement. The purpose of this study was to investigate differnce anterior cross bite group from normal group, the selected sample groups were 30 normal patient, 30 anterior cross bite patient. EMG and EGN of Biopak system were used for this study The following results were obtained 1 In resting slate of mandible, anterior cross-bite showed the higher muscle activities in all the muscle.(exception:left digastric muscle) than normal group. 2. In clenching state, No significant difference in muscle activities of normal group and anterior cross bite group was noticed 3. In swallowing state Normal group showed the higher muscle activities in left and right masseter muscle, right posterior temporal muscle. 4. In maximum opening and closing velocity, normal group showed the higher value than anterior cross-bite. 5. In the mean value of the maximum opening,the maximum anterior posterior movemenl from centric-occlusion, the lateral deviation from centric occclusion, normal group showed the higher value than anterior cross-bite group.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.252-264
• /
• 2008

Objective: To aid the development of a frontal image simulating program, we evaluated the soft tissue frontal changes in relationship to movement of hard tissue with orthognathic surgery of facial asymmetry patients. Methods: Preoperative and postoperative frontal cephalograms and frontal view photographs of 45 mandibular surgery patients with facial asymmetry were obtained in a standardized manner. Vertical and horizontal changes of hard tissue and soft tissue were measured from cephalograms and photographs, respectively. Soft tissue change in result to hard tissue change was then analyzed. Results: Both vertical and horizontal correlation analysis showed a weak relationship between the changes. Hard tissue points that were picked for 1 : 1 mean ratio with soft tissue points did not show any significant relevance. For each soft tissue change, regressive equation was formulated by stepwise multiple regression analysis, and the equation for soft tissue Menton was most reliable in predicting changes. Both vertical and horizontal hard tissue changes were used together in prediction of vertical or horizontal soft tissue change. Conclusions: The results suggest that computerized image simulation using regression analysis may be of help for prediction of soft tissue change, while 1:1 mean ratio method is not useful.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.265-274
• /
• 2008

Objective: The aim of this study was to evaluate the potency of panoramic radiography for the detection of maxillary impacted canines. Methods: Twenty-five patients were selected, comprised of 7 males (mean age: 10.9 years, range: 8.5 - 14.5 years) and 18 females (mean age: 10.9 years, range: 8.2 - 15.7 years). In total, thirty-five maxillary impacted canines were estimated. The position of the canine and root resorption of adjacent teeth were evaluated on panoramic radiography and 3D CT. Results: Except for angulation to the occlusal plane, the other parameters, such as tooth length, crown width, vertical distance and lateral shift showed larger values on panoramic radiography compared to 3D CT. In palatally impacted cases, the angulation of canine was smaller, and the vertical distance to the occlusal place was larger on panoramic radiography than 3D CT. For labially impacted canines, tooth length, crown width, and angulation to the occlusal plane were similar for the two methods. The sensitivity for detecting root resorption on panoramic radiography was calculated as being 33.3% of 3D CT. Conclusions: The position of labially impacted canines can be effectively estimated using panoramic radiography, but palatally impacted canines need further investigation such as 3D CT for proper diagnosis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.531-536
• /
• 2005

Infraclusion may be defined as teeth that stop their relative occlusal movement in the dental arches during or after the period of active eruption and then remain under the occlusal plane. Delayed exfoliation, malocclusion, increased susceptibility to dental caries and periodontal disease of both the neighboring teeth and retained molar, and dislocation of the successor are the consequencces of infraclusion of primary molars. Therefore, early diagnosis and appropriate treatments are necessary. The therapeutic approach of the infracluded teeth varied from preservation to extraction. The teeth with simple infraclusion without any signs of interference with occlusal and jaw development may be examined periodically with follow-up check and radiographically. However, if the infracluded tooth interferes with normal eruption of successor or shows any sign of delayed resorption, or the tipping of adjacent teeth or supraeruption of opposing teeth is expected, the teeth inflicted should be extracted and appropriate measures should be provided in order to maintain the normal development of occlusion and dentition. The adjacent teeth which have been collapsed over a infracluded deciduous teeth can disturb the arch length perimeter. In such cases, surgical approach might be necessary, although it would be difficult when teeth are severly leaned. However, an easier surgical access have been obtained by space regaining procedures, in young patients whose arch length has been shortened due to the infracluded teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.525-530
• /
• 2005

Maxillary median diastema is the term used when there is spacing between maxillary central incisors. The space between maxillary central incisors are often observed during ugly duckling stage. In most of the cases, as maxillary permanent canines erupt, it gradually disappears. Maxillary median diastema needs to be treated when there is up to 2mm of space between the incisors even after eruption of permanent canines or when there is 3mm of space, at least, before the eruption of the canines. Particulary, for the latter case, orthodontic treatment is recommended because not only the esthetic point of view but also to regain the eruption space for maxillary lateral incisors and canines. The appliance used for orthodontic treatment are removable appliances, using finger spring and etc, and fixed appliances, using rubber elastics and coil spring. If rubber band alone was used to treat median diastema without any other appliance such as band, tube or bracket, it will gradually move downward along the root surface. Then it will destroy the peridontal ligament and causes tooth mobility, extrusion, and avulsion. This report presents cases of damaged tooth due to improper use of rubber band when treating maxillary median diastema.

• The korean journal of orthodontics
• /
• v.49 no.1
• /
• pp.3-11
• /
• 2019

Objective: The purpose of this study was to investigate the influence of heritability on the craniofacial soft tissue cephalometric characteristics of monozygotic (MZ) twins, dizygotic (DZ) twins, and their siblings (SIB). Methods: The samples comprised Korean adult twins and their siblings (mean age, 39.8 years; MZ group, n = 36 pairs; DZ group, n = 13 pairs of the same gender; and SIB group, n = 26 pairs of the same gender). Thirty cephalometric variables were measured to characterize facial profile, facial height, soft-tissue thickness, and projection of nose and lip. Falconer's method was used to calculate heritability (low heritability, $h^2$ < 0.2; high heritability, $h^2$ > 0.9). After principal components analysis (PCA) was performed to extract the models, we calculated the intraclass correlation coefficient (ICC) value and heritability of each component. Results: The MZ group exhibited higher ICC values for all cephalometric variables than DZ and SIB groups. Among cephalometric variables, the highest ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ values were observed for the nasolabial angle (NLA, 1.544 and 2.036), chin angle (1.342 and 1.112), soft tissue chin thickness (2.872 and 1.226), and upper lip thickness ratio (1.592 and 1.026). PCA derived eight components with 84.5% of a cumulative explanation. The components that exhibited higher values of ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ were PCA2, which includes facial convexity, NLA, and nose projection (1.026 and 0.972), and PCA7, which includes chin angle and soft tissue chin thickness (2.107 and 1.169). Conclusions: The nose and soft tissue chin were more influenced by genetic factors than other soft tissues.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.366-374
• /
• 2021

Objective: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. Methods: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. Results: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. Conclusions: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.3-19
• /
• 2022

Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradient-weighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.