• Composites Research
• /
• v.31 no.5
• /
• pp.177-185
• /
• 2018

Fiber metal laminate (FML) is a type of hybrid composites which consist of metallic and fiber-reinforced plastic sheets. As the FML has a drawback of the delamination that is a failure of the interfacial adhesive layer, the nominal stresses and the energy release rates should be determined to identify the delamination behavior. However, it is difficult to derive the nominal stresses and the energy release rates since the operating temperature of the equipment is restricted. For this reason, the objective of this paper is to predict the mode-I nominal stress and the mode-I energy release rate of the adhesive layer using the inverse analysis based on the Levenberg-Marquardt method. First, the mode-I nominal stress was assumed as the tensile strength of the adhesive layer, and the mode-I energy release rate was obtained from the double cantilever beam test. Next, the finite element method was applied to predict the mode-I delamination behavior. Finally, the mode-I nominal stress and the mode-I energy release rate were predicted by the inverse analysis. In addition, the convergence of the parameters was validated by trying to input two cases of the initial parameters. Consequently, it is noted that the inverse analysis can predict the mode-I delamination behavior, and the two input parameters were converged to similar values.

• Applied Microscopy
• /
• v.34 no.4
• /
• pp.285-294
• /
• 2004

We investigated the morphology, distribution and synaptic connectivity of cholinergic neurons in the mouse retina by immunocytochemistry, using antisera against choline acetyltransferase (ChAT). ChAT-immunoreactive amacrine cells fall into two groups according to the localization of their somas in the retina: one is situated in the inner nuclear layer (INL), near the border of the inner plexiform layer (IPL), and the other is displaced in the ganglion cell layer (GCL). The dendrites of amacrine cells from the INL ramify in sublamina a and that of the displaced amacrine cells ramify in sublamina b of the IPL. Double labeling with an antisera against ChAT and r-aminobutyric acid (GABA) demonstrated that these labeled cells formed a subpopulation of GABAergic amacrine cells. The synaptic connectivity of ChAT-immunoreactive amacrine cells was identified in the IPL by electron microscopy. The most frequent synaptic input of ChAT-labeled amacrine cells was from bipolar cells in both sublaminae a and b of the IPL, followed by labeled amacrine cells and unlabeled amacrine cells. Their primary output targets were onto ganglion cells in both sublaminae a and b and output onto ganglion cells was more frequently observed in sublamina b of the IPL. Our results suggest that cholinergic amacrine cells in the mouse retina are very similar to their counter parts in other mammals, and they can attribute a major role in the pathway feeding into directionally selective ganglion cells.

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.63-71
• /
• 2007

목적 : 저주파에 해당하는 2Hz 전침 자극이 척수 N-methyl-D-aspartate receptor (NMDAR)의 NR-2B subunit의 발현 및 인산화에 미치는 영향을 조사하였다. 방법 : Sprague-Dawley계 흰쥐를 Storkson등의 방법에 의해 척수막의 지주막하강에 catheter를 삽입하는 수술을 행한 후 마비등의 척수 손상을 나타내지 않는 개체를 대상으로 하였다. N-methyl-D-aspartate (NMDA) antagonist인 D-2-amino-5- phosphonopentanoic acid (AP-5)를 투여한 후 족삼리와 삼음교에 해당하는 부위에 30분간 전침 자극하였다. 무통각 여부는 hot plate test를 시행하였으며 NMDAR NR-2 subunit 발현과 인산화 여부는 Western blot과 면역조직화학적으로 살펴보았다. 결과 : 전침 무통각은 전침 자극 후 180분 후까지 지속되었으며 NMDA antagonist인 AP-5를 투여하였을 때 전침 무통각이 저하되었으나 유의성은 나타내지 않았다. Western blot 분석으로 보아 NMDAR NR-2B 및 인산화 NR-2B의 발현은 전침자극에 의해 미약한 증가를 보이나 AP-5투여에 의해 현저한 저해를 보였다. 면역조직화학에 의한 척수배각 구역별 발현을 보면 NMDAR NR-2B 및 인산화 NR-2B는 전 배각에 걸쳐 관찰되나 경부(층판 V-VI)에서 약한 반응을 보였다. 전침 자극에 의한 각 군별 NR-2B 발현은 유의한 차이를 보여 주지 않았으나 인산화 NR-2B는 천층(층판I-II) 및 고유핵 층판(III-IV)에서 유의성 있는 증가를 보였다. 전침 자극시 AP-5 투여는 유의성은 보이지 않았으나 인산화 NR-2B 발현을 저해하였다. 결론: 저주파 2Hz 전침에 의한 무통각은 NMDA antagonist인 AP-5 투여에 의해 저해될 뿐 아니라 NMDAR NR-2B subunit의 인산화를 저해하는 것으로 보아 전침 무통각의 과정에 NMDAR 및 NMDAR NR-2B의 인산화가 관여함을 알 수 있다.

• Korean Journal of Acupuncture
• /
• v.17 no.1
• /
• pp.81-100
• /
• 2000

Transsynaptic tracer이며 신경친화성 virus인 pseudorabies virus(PRV)를 방광(膀胱), 방광유(膀胱兪), 위중(委中) 및 중추(中極)에 주입(注入)한 후 4일간의 생존기간이 경과한 후 희생시켜 면역조직화학침액법(免疫組織化學染色法)에 의하여 뇌척수에 표지된 공통된 영역들을 비교하여 관찰한 결과는 다음과 같다. 1. 방광벽(膀胱壁), 방광유(膀胱兪), 위중(委中) 및 중추(中極)에서 척수에 투사된 영역은 흉수(胸髓), 요수(腰髓) 및 천수(薦髓)에 모두 표지되었으며 공통적으로 표지된 부위는 척수(脊髓)의 층판 IV, V, VII, IX, X영역에 표지되었으나 주로 강하게 표지된 공통된 영역은 층판 VII의 중간외측핵, 가슴기둥 및 층판 X영역이었다. 2. 방광벽(膀胱壁), 방광유(膀胱兪), 위중(委中) 및 중추(中極)에서 뇌(腦)에 투사된 공통된 영역은 연수(延髓)에서는 A1 noradrenalin cells/C1 adrenalin cells/caudoventrolateral reticular nucleus에서 양성반응을 나타내었다. 솔기핵의 경우 아핵인 불명솔기핵, 창백솔기핵 및 큰솔기핵에서 양성반응을 보였다. 다리뇌에서는 청색반점, Barrington's nucleus, A5세포군 및 삼차신경운동핵에서 양성반응을 보였고, 중뇌에서는 눈돌림신경핵, 눈돌림신경섬유 및 다리핵에서 양성반응을 보였다. 간뇌에서는 시상하부(視床下部)의 뇌실(腦室)곁핵과 시상의 뇌실곁핵에서 양성반응을 보였고 대뇌(大腦)에서는 septal nucleus, 피질(皮質)의 뒷다리영역, 마루엽, 이마엽에서 양성반응을 보였다. 이상의 결과를 종합하면 방광(膀胱)에서 투사되는 뇌척수의 영역과 방광유(膀胱兪)나 위중(委中)에서 투사되는 공통된 표지영역들은 방광(膀胱)과 족태양방광경(足太陽膀胱經) 그리고 그 경락(經絡)의 경혈(經穴)들이 어떤 상관성(相關性)을 가지고 연결(連結)되어 있다는 사실을 실험적으로 알 수 있었다. 특히 방광(膀胱)과 방광유(膀胱兪), 위중(委中)에서 투사된 공통된 표지영역, 즉 배뇨중추인 Barrington's nucleus에 표지되는 것은 내장(內臟)-경락(經絡)이 central autonomic pathway에 의하여 서로 연결되었음을 입증하는 중요한 결과(結果)라고 사려(思慮)된다.

• Journal of the Korean Society of Radiology
• /
• v.83 no.5
• /
• pp.1071-1080
• /
• 2022

Purpose To compare the MR findings of septic and acute gouty arthritis of the knee joint. Materials and Methods This retrospective study included patients who underwent knee MRI for septic or gouty arthritis at our hospital between October 2012 and October 2018. The MR findings were analyzed for the presence of bone marrow edema, soft tissue edema, abscess, pattern of synovial thickening (frondlike, lamellated, diffuse linear), maximum thickness of the synovium, and joint effusion volume. The gouty (n = 5) and septic arthritis (n = 10) groups were compared using the Wilcoxon rank-sum test and Fisher's exact test. Results No statistically significant differences were observed for each item. One patient in the gouty arthritis group and seven in the septic arthritis group had bone marrow edema. Soft tissue abscess formation was only observed in the septic group. The incidence of each synovial thickening pattern was as follows: 100% (diffuse linear) in the gouty arthritis group and 20% (frondlike), 50% (lamellated), and 30% (diffuse linear) in the septic arthritis group. Conclusion Differentiation of gouty arthritis and septic arthritis based on imaging findings is difficult. However, lamellated synovial thickening patterns, bone marrow edema, and soft tissue abscess formation are more commonly observed in patients with septic arthritis than in those with gouty arthritis.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.385-386
• /
• 2000

어류의 아가미는 호흡, 삼투조절, 질소 노폐물의 배설과 산, 염기의 평형 조절을 담당하는 기관이다. 특히 아가미는 좌운 4쌍의 새궁으로 구성되며, 각각에서 여러 개의 새엽이 그리고 각각의 새엽으로부터 좌우로 새판이 돌출된 구조로 호흡상피의 표면이 확장된 구조적 특징을 갖는다. 이 호홉층판구조가 직접 그리고 계속해서 서식수의 흐름과 맞닿게 되므로 서식수의 변화에 의해 영향을 받게 되어 빠른 세포의 재생율을 가진도고 알려져 있다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.275-276
• /
• 2015

기존의 상용화된 Ni-Cr tie-coating 물질은 내열성 시험 후 강도가 저하되고, Cr 성분이 patterning후에 완벽하게 제거 되지 않아서 누설 전류를 만드는 단점을 갖고 있다. 따라서 이 연구에서는 기존의 Ni-Cr 과 삼원계 Ni-Cr-X(X는 Nb, V, Mo, Ti) 물질의 패터닝성과 내열성을 비교하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.237-247
• /
• 1993

Carbon fiber reinforced plastics(CFRP) have gained increased application in aerospace structures because of their specific strength and stiffness, but are sensitive to impact-induced damage. An experimental investigation was carried out to evaluate the impact resistance of CFRP according to the ply angle. The specimens of angle ply laminate composites were employed with [0.deg. $_{6}$/ .deg.$_{10}$/0.deg.$_{6}$], in which 6 kinds of ply angle such as .deg.=15.deg., 30.deg., 45.deg., 60.deg., 75.deg. and 90.deg. were selected. The impact tests were conducted using the air gun type impact testing machine by steel balls of diameter of 5 mm and 10 mm, and impact-induced damages were evaluated under same impact speed of V=60m/s. The impact damaged zones were observed through a scanning acoustic microscope (SAM). The obtained results were summarized as follows: (1) Delaminations on the interfacial boundaries showed th directional characteristics to the fiber directions. The delamination area on the impact side (interface A) was considerably smaller compared to that of the opposite side (interface B). (2) Cracks corresponding to other delaminations than those mentioned in SAM photographs were also seen on the impact damaged zone. (3) The delamination patterns were affected by the ply-angle, the dimensions of the specimen, and the boundary conditions. (4) The impact damaged zone showed zone showed the delamination on the interfacial boundaries, transverse shear cracks of the surface layer, and bending cracks of the bottom layer.r.r.r.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.566-574
• /
• 2016

Fiber metal laminates, which are hybrid materials consisting of metal sheets and composite layers, have contributed to aerospace and automotive industries due to their reduced weight and improved damage tolerance characteristics. In this study, the impact performance of the laminates, which are comprised of a self-reinforced polypropylene and two aluminum sheets, and the pure aluminum alloy sheet material were investigated experimentally via numerical simulation. In order to compare the impact performance, the laminates and aluminum alloy were examined by assessing the impact force, energy time histories, and specific energy absorption. ABAQUS is a commercial software that is used to simulate the actual drop-weight tests. Based on this study, it is noted that the impact performance of the laminates was superior to that of the aluminum alloy. In addition, a good agreement between the experimental and numerical results can be achieved when the impact force and energy time histories from the experiments and the numerical simulations are compared.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.944-951
• /
• 1988

Global-Local Laminate Variational Model is utilized to investigate the characteristics of interlaminar stresses in thick composite laminates under uniform axial extension. Various laminates with different fiber orientation and stacking sequences are analyzed to observe the behavior of interlaminar normal stresses. From this result, the interlaminar normal stress distribution along the laminate interfaces is examined and discussed with an existing approximation model. The repeated stacking of Poisson's ratio symmetric sublaminates is found to be the best stacking method of thick composite laminates to reduce the interlaminar normal stresses for the prevention of the free-edge delamination.