• Title/Summary/Keyword: 층간

Search Result 1,303, Processing Time 0.028 seconds

Three Dimensional Stress Analysis of Composite Laminates using Stress Functions and Interface Modeling (응력함수와 층간면 모델링을 이용한 복합재 적층판의 3차원 응력해석)

  • Kim, H.S.;Kim, J.Y.;Kim, J.G.
    • Journal of Power System Engineering
    • /
    • v.13 no.4
    • /
    • pp.49-55
    • /
    • 2009
  • 복합재 적층판의 자유단 근처에서 나타나는 층간 응력의 집중 현상을 층간면 효과를 고려해 해석하였다. 복합재 적층판 내부의 임의의 위치에서 3차원 평형방정식을 만족시키기 위해 렉니츠키 응력함수를 도입하였으며, 가상일의 원리를 이용하여 지배방정식을 유도하였다. 주어진 응력함수를 이용하여 구한 3차원 응력들은 복합재 적층판의 아래 위 면뿐만 아니라 자유단에서 하중자유조건을 잘 만족한다. 기하학적 불연속성 때문에 복합재 적층판의 자유단에서는 응력의 특이가 발생하지만, 층간면 효과를 고려하게 되면 층간응력의 집중현상을 정확하게 해석할 수 있다. 자유단에서 발생한 층간응력의 크기를 보면, 층간면 효과를 고려할 경우, 응력특이 효과가 많이 줄어드는 것을 관찰할 수 있다. 본 연구에서 주어진 층간면에서의 정확한 응력 해석은 복합재 적층판의 강도설계를 수행하는 초기 설계 툴로 사용할 수 있다.

  • PDF

The Management System and Effect of Floor Noise at Apartment Houses (공동주택 층간소음 해결을 위한 현장관리시스템과 그 효과)

  • CHA, SANGGON
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2014.10a
    • /
    • pp.693-697
    • /
    • 2014
  • 본 연구는 민원인(아래층)과 피민원인(윗층)간 전문상담사의 중재를 통해 층간소음 문제를 해결하는 층간소음 현장관리시스템의 실효성을 검증하였다. 민원인(아래층)과 피민원인(위층)의 층간소음 피해경향을 분석한 결과, 4,087건 중 80%에 해당하는 3,254건의 민원인들은 층간소음 발생장소를 바로 윗층을 지목하는 것으로 나타났고, 반면에 15%에 해당하는 피민원인들(윗층)은 피해를 받는 원인이 소음이 아니라 피민원인의 전화나 방문 등을 통한 잦은 항의를 지적하는 것으로 분석되었다. 1,304건의 현장 방문 민원건수 중 80%에 해당하는 1,050건을 대상으로 현장방문 컨설팅 전 후의 층간소음 저감 등 만족도 조사결과, 약 683건에 해당하는 65%정도의 민원인은 층간소음 현장관리시스템에 만족하고 있는 것으로 평가되었다.

  • PDF

아파트 층간 소음 문제 해결 방안이 없을까?

  • An, Jong-Seok
    • 주택과사람들
    • /
    • s.190
    • /
    • pp.76-77
    • /
    • 2006
  • 아파트에 살면서 층간 소음 문제로 고민해보지 않은 사람은 없을 것이다. 층간 소음은 누구나 고민하는 문제이지만 해결하기가 쉽지 않은 분쟁 사항 중 하나다. 법률적으로 층간 소음 문제를 해결하는 방법이 무엇인지 알아보도록 하자.

  • PDF

Free Vibration Analysis of Multi-Delaminated Beams (다층 층간분리된 적층보의 자유진동해석)

  • 이성희;박대효;백재욱;한병기
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.14 no.4
    • /
    • pp.469-479
    • /
    • 2001
  • In the present study, free vibration analysis of multi-delaminated beams is performed. In order to investigate the effects of mu1ti-delaminations on the dynamic characteristics of multi-delaminated beams, the general kinematic continuity conditions are derived from the assumption of constant curvature at the multi-delamination tip. Frequency equations of multi-delaminated beams are obtained by dividing the global multi-delaminated beam into beam segments and by imposing recurrence relation from the continuity conditions un each sub-beam. The comparisons between the results of numerical analysis obtained by finite element analysis and those of present analysis give good agreement with each other. It is shown that the effects of multi-delaminations on free vibration characteristics of laminated beams could be used to detect their sizes, types and locations from the results.

  • PDF

Beam-Type Bend Specimen for Interlaminar Fracture Toughness of Laminated Composite under Mixed-Mode Defmrmations (보 형태의 굽힘시편을 이용한 적층복합재료의 혼합모우드 층간파괴인성 평가)

  • 윤성호;홍창선
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.5
    • /
    • pp.911-920
    • /
    • 1989
  • It this study, beam-type bend specimen is used to evaluate the interlaminar fracture toughness of laminated composite under mixed-mode deformations. The specimen is loaded under three-point bending and hence produced mixed-mode deformations in the vicinity of the crack tip according to the variation of the thickness ratio on delamination plane. Total energy release rate is obtained by elementary beam theory considering the effect of shear deformation. The partitioning of total value into mode-I and mode-II components is also performed. The mixed-mode interlaminar fracture toughness is evaluated by experiments on specimens with several thickness ratios of delamination plane. As the part of delamination plane is thicker, the effect of shear deformation on total energy release rate is increased. Beam-type bend specimen men may be applied to obtain informations on the mixed-mode interlaminar fracture behavior of laminated composites.

Effect of the Trend fo Civil Complaint and Apartment Price at Management System of Floor Noise at Houses (층간소음 관리시스템이 민원저감과 아파트 가격에 미치는 영향)

  • Cha, SangGon;Kim, HyunJu
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2014.10a
    • /
    • pp.704-709
    • /
    • 2014
  • 본 연구는 현재 사회문제화 되고 있는 층간소음 피해 실태조사 분석을 통하여 적용 가능한 층간소음 분쟁의 예방을 위한 효율적인 관리시스템을 개발 적용하였다. 설문조사 분석결과, 층간소음의 주요 발생 원인으로 아이들 뛰는 소음과 어른 걷는 소음이 55% ~ 75%로 가장 심각한 소음원으로 나타났으며, 소음 피해시간대는 저녁(18시~22시) 시간대는 50% ~ 65%로 가장 높게 나타났으며, 야간(22시~ 06시) 시간대는 26% ~ 45%범위에 있는 것으로 분석되었다. 층간소음관리시스템 적용 전 후의 민원저감효과 분석결과, 전라도 광주는 100%, 대구시는 87.5%, 서울의 경우는 83%, 경기도는 71% 순으로 나타나, 평균 약 85% 이상의 민원 저감효과가 있는 것으로 나타났다. 층간소음관리시스템 적용 전 후의 아파트 가격 변화 분석결과, 적용된 아파트의 경우는 평균 17.23백만원 상승한 반면, 미적용된 아파트는 0.55백만원 하락한 것으로 평가되었다.

  • PDF

The Study of Improvement of Interlaminar Shear Strength for 2-D Carbon/carbon Composites (2-D 탄소/탄소복합재의 층간전단강도 개선에 관한 연구)

  • 손종석;정구훈;김정일;주혁종;김광수
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 1999.11a
    • /
    • pp.118-123
    • /
    • 1999
  • 저밀도 폐놀계 탄소/탄소 복합재의 층간전단강도를 개선하기 위해 흑연분말, 카본블랙, 카본매트, 단섬유 등의 첨가제를 사용하였다. 카본매트와 단섬유를 첨가한 경우, 수지의 부족에 의한 층간접착력의 약화를 가져왔으며, 카본블랙을 첨가한 경우에도 큰 효과를 나타내지 못했다. 흑연을 첨가했을 때 약 30%의 층간강도 개선을 가져왔으며 특히 9 vol.%의 첨가량에 대해서 가장 큰 효과를 보였다.

  • PDF

Evaluation of Free-Edge Delamination in Composite Laminates (복합재 적층판의 자유단 층간분리의 평가)

  • 김인권;공창덕;방조혁
    • Composites Research
    • /
    • v.14 no.1
    • /
    • pp.8-14
    • /
    • 2001
  • A simplified method for determining the three mode(I, II, III) components of the strain energy release rate of free-edge delaminations in composite laminates is proposed. The interlaminar stresses are evaluated using the interface moment and the interface shear forces which are obtained from the equilibrium equations at the interface between the adjacent layers. Deformation of an edge-delaminated laminate is analysed by using a generalized quasi-three dimensional classical laminated plate theory. The analysis provides closed-form expression for the three components of the strain energy release rate. The analyses are performed for composite laminates subjected to uniaxial tension, with free-edge delaminations located symmetrically and asymmetrically with respect to the laminate midplane. The analysis results agreed with a finite element solution using the virtual crack closure technique.

  • PDF

Flexural Rigidity Reduction of Multi-Delaminated Composite Beams (다층 층간분리된 복합적층보의 휨강성 감소)

  • Park, Tae-Hyo;Baek, Jae-Wook;Cho, Baik-Soon
    • Journal of Korean Society of Steel Construction
    • /
    • v.13 no.3
    • /
    • pp.233-244
    • /
    • 2001
  • In this study, flexural rigidity reduction of multi-delaminated composite beams are investigated. In order to evaluate the flexural rigidity reduction. Performed theoretical analysis. In order to investigate flexural rigidity reduction about effects of delamination on composite beams, the general kinematic governing equations are derived and solved by dividing the delaminated beam and imposing the continuity conditions into each sub-beam. For condition to appear multiple delamination through the laminated composite beams, the flexural rigidity reduction are compared according to many stacking sequences and several forms for delaminations. The present study could be used to evaluate the flexural rigidity reduction of composite laminated beams on multi-delaminations.

  • PDF

A Study on Experiment Scenarios for Floor Noise Epicenter Recognition Systems (층간소음 진원지 인지 시스템을 위한 실험 시나리오에 관한 연구)

  • Ko, Jaehyeon;Kim, Neunghoe;Jeong, Dongwon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2021.10a
    • /
    • pp.9-11
    • /
    • 2021
  • Currently, the occurrence of floor noise in Korea is gradually increasing, and for this reason, the problem of secondary conflict is also increasing. Various studies have been conducted to solve these problems, but the definition of floor noise is not clear, and data of floor noise in various situations cannot be obtained. Therefore, this paper defines various scenarios of floor noise for floor noise epicenter recognition system. For this, the experimental scenario is defined in consideration of environment required for the experiment, the type of floor noise generated in real life, the location of the collector, and the noise intensity. It is possible to increase the accuracy of the floor noise epicenter recognition system when performing data collection and learning operations based on the defined experimental scenario.

  • PDF