• Title/Summary/Keyword: 측지제거

Search Result 25, Processing Time 0.055 seconds

Optimum management of tomato side shoot removal in winter (저온기 토마토 재배시 적정 측지관리방법 구명)

  • Kim, Sung Eun;Lee, Jae Eun;Sim, Sang Youn;Lee, Moon Haeng;Kim, Young Shik
    • Journal of Bio-Environment Control
    • /
    • v.23 no.4
    • /
    • pp.309-313
    • /
    • 2014
  • This research was conducted to establish recommendable side shoot management methods in the growth and yield of tomato in winter. A cherry tomato, $^{\circ}{\times}Unicorn^{\circ}{\pm}$ (Monsanto Korea, Korea) was cultivated in coconut coir in the form of bag as substrate. There were four treatments related to side shoot removal methods; 1) To remove all side shoots and also each one of three leaves which gives shade to each cluster attached below (UP-FL), 2) To remove all side shoots and also each one of three leaves which gives shade to each cluster only with fruit attached below (UP-FR), 3) To remove all side shoots (AS-All), and 4) To remain two leaves of each side shoot coming from right below each cluster (AS-Part). The number of malformed leaves were more in UP-FL, UP-FR, AS-All, and AS-Part in descending order, which showed the severe the removal of leaves the more the malformed leaves. The malformed leaves were diminished after the development stage the second or third cluster bloomed. The yields until fifth cluster were not different among the treatments. Therefore removal of side shoots and leaves recommends not to be done severely in early growth stage when tomato plants are cultivated in winter.

Optimum Management of Tomato Side Stems Pruning in Summer Cultivation (고온기 토마토 재배시 적정 측지관리방법 구명)

  • Kim, Sung Eun;Kim, Young Shik
    • Journal of Bio-Environment Control
    • /
    • v.23 no.3
    • /
    • pp.167-173
    • /
    • 2014
  • This research was conducted to establish appropriate methods to prune tomato side stems during summer. Cherry tomatoes "Unicorn" (Monsanto Korea, Korea) were grown in the coir based growing medium, and irrigation was controlled time based system. There were three pruning treatments: 1) removing all side stems (ACUT), 2) remaining two leaves on the side stems right below any cluster (PCUT), and 3) remaining two leaves on all side stems (LEFT). Experimental results showed that the occurrence of swollen stems, a symptom of nutrient excess, was influenced by side stem pruning due to blocking of consumption of photosynthetic products. The photosynthetic rate was not different between leaves on main stem and those on side shoots. Therefore the differences in the total amounts of photosynthetic products seemed to come out from the differences in leaf areas on each treatments, influencing on fruit yield difference. The yields and harvesting rates were better in ACUT treatment when tomato plants were harvested until $5^{th}$ cluster, however tomato yield was higher in LEFT treatment when more then $5^{th}$ clusters were harvested.

Development of Optimal Pruning Method on Okra (Abelmoschus esculentus L. Moench) Production (오크라 생산에 있어서 적정 적심방법 개발)

  • Ahn, Yul-Kyun;Kim, Shun-Hwan;Seong, Ki-Cheol;Moon, Doo-Kyong
    • Journal of Bio-Environment Control
    • /
    • v.20 no.1
    • /
    • pp.58-61
    • /
    • 2011
  • This study was conducted to develop an optimal pruning method for okra production. Three pruning methods were tested including apical bud removing, one-third removing from the top of plant, and no pruning as a control with 3 kinds interval for 15 days after 2 months sowing. The growth and development of okra was better at the treatment of one-third removing of plant than the others. The number of branches was 0.7 in control, 3.7~4.0 in apical bud removing, and 3.0~6.0 in one-third removing treatment. In summary, one-third pruning of plant from the top of plant at 30 days after starting of pruning treatment, which showed the highest yield by 12,910 kg/10a.

A Study on GNSS Data Pre-processing for Analyzing Geodetic Effects on Crustal Deformation due to the Earthquake (지진에 의한 측지학적 지각변동 분석을 위한 GNSS 자료 전처리 연구)

  • Sohn, Dong Hyo;Kim, Du Sik;Park, Kwan Dong
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.23 no.1
    • /
    • pp.47-54
    • /
    • 2015
  • In this study, we developed strategies for pre-processing GNSS data for the purpose of separating geodetic factors from crustal deformation due to the earthquakes. Before interpreting GNSS data analysis results, we removed false signals from GNSS coordinate time series. Because permanent GNSS stations are located on a large tectonic plate, GNSS position estimates should be affected by the tectonic velocity of the plate. Also, stations with surrounding trees have seasonal signals in their three-dimensional coordinate estimates. Thus, we have estimated the location of an Euler pole and angular velocities to deduce the plate tectonic velocity and verified with geological models. Also, annual amplitudes and initial phases were estimated to get rid of those false annual signals showing up in the time series. By considering the two effects, truly geodetic analysis was possible and the result was used as preliminary data for analyzing post-seismic deformation of the Korean peninsula due to the Tohoku-oki earthquake.

Optimal National Coordinate System Transform Model using National Control Point Network Adjustment Results (국가지준점 망조정 성과를 활용한 최적 국가 좌표계 변환 모델 결정)

  • Song, Dong-Seob;Jang, Eun-Seok;Kim, Tae-Woo;Yun, Hong-Sic
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.25 no.6_2
    • /
    • pp.613-623
    • /
    • 2007
  • The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

A Performance Analysis of Weaving Pattern Elimination Filter for Virtual Textile Wearing System (가상 직물 착용 시스템의 직조 패턴 제거 필터의 성능 분석)

  • Kwak, No-Yoon;Ahn, Eun-Young
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2012.05a
    • /
    • pp.10-13
    • /
    • 2012
  • 본 논문은 가상 직물 착용을 위한 직조 패턴 제거 필터의 성능 분석에 관한 것이다. 명도 차분 맵을 이용한 가상 직물 착용 시스템은 의류 형상 영역의 명도 차분 맵을 이용하여 조명과 음영 특성을 추출할 시, 의류 형상 영역의 색상에는 무관하지만 의류 모델의 직조 패턴에는 영향을 받는다. 본 논문에서는 바이래터럴 필터(bilateral filter)와 측지 형태학 필터(geodesic morphological filter)에 기반하여 모델 의류 영역의 직조 패턴을 제거하는 방법을 소개하고 그 성능을 분석함에 목적이 있다. 가상 직물 착용 시스템에 직조 패턴 제거 필터를 채택할 경우, 최대한 모델 영상의 직조 패턴에 무관하게 직물 원단의 디자인이 의복의 외관에 미치는 영향을 시뮬레이션할 수 있음에 따라 직물 디자이너의 창작활동을 도와줄 수 있다. 또한 온라인상에서 직물 원단이나 의류를 거래할 시에 구매자로 하여금 모델 영상의 직조패턴에 종속되지 않은 상태에서 의사결정을 할 수 있도록 지원해 B2B 또는 B2C 전자상거래 행위를 촉진할 수 있다.

  • PDF

Effect of Apex Removal at Different Leaf Ages on the Growth and Yield of Broccoli. (엽령이 다른시기의 생장점 제거가 브로콜리의 생육 및 수량에 미치는 영향)

  • Seong, Ki-Cheol;Lee, Jae-Wook;Kwon, Hyeog-Mo;Moon, Doo-Yong;Kim, Chun-Hwan
    • Journal of Bio-Environment Control
    • /
    • v.13 no.1
    • /
    • pp.21-25
    • /
    • 2004
  • This experiment was carried out to investigate the effect of apex removal at different leaf ages on the growth and yield of broccoli in pinching cultivation. Apex was pinched when 2, 3 or 4 true leaves were spread during nursery bed, and non-pinching was conventional method. The plant height was not different among treatments but the fresh weight was decreased as the pinching days were delayed. The numbers of leaves and lateral shoots were increased compared to those of non-pinching by pinching. Days to central budding were shortended by 3 days when pinched at 2 true leaves spreading stage than those of non-pinching. Central (1st) head weight was heaviest when pinched at the time of 2 true leaves spreading (157g). Total head weight was heaviest when pinched at the time of 2 true leaves spreading (378g), and lowest at 4 true leaves spreading stage (196g). Marketable yields were increased by 48% when pinched at the time of 2 true leaves spreading (1,754kg) as compared with those of non-pinching (1,184kg) and lowest when pinched at the time of 4 true leaves spreading (820kg). Also, first harvest was shortended by 6 days by pinching at 2 true leaves spreading stage.

Research Of Construction Quality Execute Management A Plan Using TS (TS를 활용한 건설공사 품질시공 관리방안에 관한 연구)

  • 김감래;이재기;장우영
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2003.04a
    • /
    • pp.485-488
    • /
    • 2003
  • 본 연구는 건설공사의 경계점 및 구조물의 기준점을 TS를 활용하여 현장 측지좌표체제를 탈피지적좌표로 전환 관리하여 토지경계분쟁 문제의 사전제거 및 공사품질시공관리에 향상을 기하고자 연구하였다.

  • PDF

Geodesics-based Shape-preserving Mesh Parameterization (직선형 측지선에 기초한 원형보전형 메쉬 파라미터화)

  • 이혜영
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.31 no.7
    • /
    • pp.414-420
    • /
    • 2004
  • Among the desirable properties of a piecewise linear parameterization, guaranteeing a one-to-one mapping (i.e., no triangle flips in the parameter plane) is often sought. A one-to-one mapping is accomplished by non-negative coefficients in the affine transformation. In the Floater's method, the coefficients were computed after the 3D mesh was flattened by geodesic polar-mapping. But using this geodesic polar map introduces unnecessary local distortion. In this paper, a simple variant of the original shape-preserving mapping technique by Floater is introduced. A new simple method for calculating barycentric coordinates by using straightest geodesics is proposed. With this method, the non-negative coefficients are computed directly on the mesh, reducing the shape distortion introduced by the previously-used polar mapping. The parameterization is then found by solving a sparse linear system, and it provides a simple and visually-smooth piecewise linear mapping, without foldovers.

Microarray profile of hypothalamic gene expression with acupuncture at acupoint ST36 in carrageenan induced inflammation in Stat 6 knockout mice (Carrageenan으로 염증을 유도한 Stat 6 유전자제거 생쥐의 족삼리 침치료에 대한 시상하부 유전자의 마이크로어레이 프로파일)

  • Park, Hi-Joon;Um, Yoon-Kyung;Jung, Kyung-Hee;Kim, Soo-Cheol;Han, Mi-Young;Hong, Mee-Suk
    • Korean Journal of Acupuncture
    • /
    • v.24 no.2
    • /
    • pp.129-139
    • /
    • 2007
  • 목적 : Signal transducers and activators of transcription 6 (Stat 6) 유전자는 면역세포의 발달에 있어서 중요한 유전인자이며, IL-4와 같은 사이토카인에 의해 유전자 발현이 조절된다. 본 연구에서는 Stat 6 유전자 제거 생쥐와 정상 (wild type, W/T) 생쥐에 carrageenan으로 염증을 유도한 후 족삼리에 침치료를 시행하여 시상하부에서의 유전자 발현 양상을 분석하고자 하였다. 방 법 : BALB/c (W/T, n=12) and BALB/c-Stat 6 유전자 제거 생쥐 (n=12)의 발뒤꿈치 표피에 1% carrageenan을 30 ul 주사하여 염증을 유도하였다. 침은 염증 유도 30분 후에 족삼리(ST36)에 시침하였으며, 염증유도에 의한 부종 증가율을 매 시간마다 측정하여 총 5시간동안 측정하였다. 마이크로에러이는 Stat 6 유전자 제거 생쥐를 염증 유발 군과 염증유발 후 침을 처치한 군으로 나누고, 시상하부를 적출하여 RNA를 분리한뒤 마이크로어레이 프로파일을 분석하였다. 결 과 : 염증에 의한 부종증가율을 비교한 결과, Stat 6 유전자 제거 생쥐 그룹의 부종증가율이 W/T 생쥐의 부종 증가율보다 약 50 % 정도 감소하였으며, 각 3, 4, 5시간째에 유의한 차이를 나타내었다. (각 p<0.05). W.T생쥐군과 Stat 6 유전자 제거 생쥐군 모두에서, 침 처치군이 염증 유발 군에 비해, 염증 유발 2시간 후부터 유의한 감소를 나타내었다. 시상하부의 유전자 발현을 관찰한 결과, 39개의 유전자가 3배 이상 감소하였으며, 19개의 유전자는 3배 이상 증가하였다. 결 론 : W/T 생쥐군과 Stat 6 유전자 제거 생쥐 모두에서 침의 진통효과는 나타나며, 이의 기전에는 시상하부에서의 침 치료에 의한 염증관련 유전자들의 감소와, 항염증과 관련된 유전자들이 증가가 관여하는 것으로 보인다., 10, 11), 내측전완피신경(TE5, 6, 7, 8, 9, 10, 11), 후상완피신경(TE12, 13), 상외측상완피신경(TE13), 외측쇄골상신경(TE14, 15),대이개신경(TE16, 17, 18, 19), 소후두신경(TE19, 20), 이개측두신경(TE20, 21, 22), 안면신경측두지(TE22, 23), 관골측두신경(TE23), 중층에 견갑상신경(TE15), 견갑배신경(TE15), 경상설골근신경(TE17), 후이개신경(TE18, 19, 20), 안면신경측두지(TE20, 21, 22), 심층에 후골간신경(TE5, 6, 7), 요골신경심지(TE8, 9, 12, 13), 견갑상신경(TE14), 액와신경가지(TE14), 부신경(TE16), 안면신경과 부신경가지(TE17), 설인신경(TE17), 설하신경(TE17), 경신경고리(TE17), 미주신경(TE17), 안면신경 (TE18). 3) 혈(血) 관(管) : 천층에 척측정맥배측지(TE1, 2), 고유수장지동맥배측지(TE1), 배측중수골동맥배측지(TE2), 배측중수골정맥(TE3), 척측피정맥(TE4, 5, 6, 7, 8, 9, 10, 11), 배측정맥궁(TE4), 부요측피정맥(TE6, 8, 9),요측피정맥(TE10, 11), 후견봉정맥가지(TE13, 14), 후이개동 ${\cdot}$ 정맥(TE16, 17, 18, 19, 20), 전이개동 ${\cdot}$ 정맥(TE20), 천측두동 ${\cdot}$ 정맥(TE22, 23), 중층에 후상완회선동맥(TE14), 견갑배동맥(TE15), 견갑상동맥(TE15),천측두동 ${\cdot}$ 정맥(TE21), 관골측두동 ${\cdot}$ 정맥(TE23), 심층에 배측중수골동맥(TE3), 배측수근동맥궁(TE4), 후골간동맥(TE4, 5, 6, 7, 8, 9), 전골간동맥(TE6, 7, 9)

  • PDF