• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.677-682
• /
• 2009

According to the revised law of survey, all the geographic information data including 1/1,000 digital topographic maps have to be converted to world geodetic reference system by the end of 2009. National Geographic Information Institute (NGII) formulated the policy to promote the conversion from local geodetic reference system to world geodetic reference system. However, the current conversion rate is lower than planned due to some impeding factors. Therefore, in this paper, those impeding factors are investigated and then efficient conversion strategies are established and provided. The research involves the validation of affine transformation, the determination of critical value for outlier detection and optimal number of common control points for coordinate conversion, and the treatment of old and new control points.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.101-116
• /
• 2015

In Boundary Point Coordinate Register Area, the accuracy on Transformation of World Geodetic System(WGS) is determined by surveying results at the reference point. However, the present surveying result in reference points indicates the irregular performance due to the limitations of measurement techniques and methodologies, moreover, can be contaminated by various error sources from the unique characteristics of each project district and start time of the project. Therefore, the main purpose of present investigation is to conduct an inquest into error cause by project districts for each type in Boundary Point Coordinate Register Area, and propose the improvement plan of surveying accuracy through the WGS Transformation and verification-surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.401-412
• /
• 2014

This study is purposed on showing an effective process for coordinate transformation of cadastral maps, based on the local datum, in the World Geodetic System (WGS) for Cadastral Reform Project (CRP). The process follows three steps: coordinate adjustment, datum transformation and distortion modeling. The first procedure is that point coordinates on local datum has to be adjusted by those GPS observed point-to-point distances, using trilateration. Secondly, the adjusted coordinates need to be transformed to WGS by applying the Affine model, while the verification of the methodology is implemented under numerical experiments. To conduct this procedure, 195 points in the same coordinate origins in Seoul and 61 points in several different origins in Incheon are used in the estimation. As a result, there are less than 2cm coordinate differences between transformed coordinates and measured ones at everywhere. Also, it is remarkable that the transformation does not depend on either of the particular common points or the sizes of computed region. Therefore, this suggested methodology is expected to easily provide identifications and corrections for points-deviations for improved quality of the cadastral map by distortion modeling through CRP.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.561-571
• /
• 2020

Seven techniques widely used in the geodetic transformations have been reviewed and compared to figure out their theoretical characteristics. A series of numerical tests were performed about four data sets. This was followed by result analyses in terms of transformation residuals and accuracies together with some hypothesis testings based on the student-t distribution to confirm the statistical significance of the techniques. In the case of the transformation between the geodetic frames implemented in the same system, no statistical significance was revealed in the results of the 3D transformation techniques, even if the testing area becomes large as the Asia-Oceania continent. Among the 2D transformations, it was possible for the NTv2 grid modeling technique to deliver improved transformation accuracy. Finally, it was possible from the results analyzed in this study to propose the Helmert transformation to geodetic control points and the NTv2 technique to the 2D spatial data transformation of the geodetic systems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.367-380
• /
• 2011

This paper has focused on deriving a GPS based geodetic network adjustment strategy to continuously determine coordinate sets of the national geodetic control points. After domestic literature review on the topic and overseas case studies about countries that recently reformed their geodetic infrastructure have been carried out, a simplified geodetic network consisting of two layers, namely GPS active and passive network, has been proposed to maximize effectiveness of the network adjustment through reducing the number of the passive points. Furthermore, a GPS data processing and network adjustment procedure has been derived to support the continuous management scheme. While a scheme for the active layer adopts a sequential least squares adjustment based on a multi-baseline, that of the passive layer employs a multi-session adjustment technique with respect to 3-dimensional baseline vectors. Finally, experimental adjustment against a network comprising 24 active and 6,900 passive stations has been performed to demonstrate the efficiency and the effectiveness of the proposed method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.273-282
• /
• 2005

A rapidly developed satellite technology is used in comprehensive fields such as spatial data aquisition and applications. Especially a GPS positioning is expected to reinvigorate at the national reference system changes to ITRF (International Terrain Reference Frame). Currently the National Geographic Information Institute (NGII) issues a triangulation point coordinate by separating old and new coordinates and in the year of 2007 it will be scheduled to be changed ITRF. The triangulation point coordinate in Cheju area causes some problems due to the difference original observation and re-observation. Thus in this study a GPS observation is conducted after re-organizing geodetic network based on 1st and 2nd order triangulation in order to check the current triangulation points in Cheju area. After the GPS observation data analysis, stable points were extracted, proposed a geodetic network and its application.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2008

GPS baseline analysis is a mathematical procedure which estimates a baseline vector from carrier-phase double-differenced observations. Least squares technique is generally applied for the processing and integer ambiguities in the observations should be resolved to obtain maximum accuracy of the solution. In GPS control surveying, after assembling the baseline solutions into a network, adjustment is performed to derive final coordinate sets of unknown points. This paper deals with details of GPS baseline analysis for the $2^{nd}$ order national geodetic network adjustment. After reviewing GPS campaigns carried out by National Geographic Information Institute (NGII) and their observations. technical issues and considerations for the GPS baseline analysis are presented with emphasis of selecting the processing strategies and software. Finally, the analyzed results will be evaluated by examining the close of figures formed by joining the processed baseline vectors.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.65-74
• /
• 2006

A rapidly developed satellite technology is used in comprehensive fields such as spatial data aquisition and applications. Especially a GPS positioning is expected to reinvigorate at the national reference system changes to ITRF(International Terrain Reference Frame). Currently the National Geographic Information Institute(NGII) issues a triangulation point coordinate by separating old and new coordinates and in the year of 2007 it will be scheduled to be changed ITRF. The triangulation point coordinate in Cheju area causes some problems due to the difference original observation and re-observation. Thus in this study a GPS observation is conducted after re-organizing geodetic network based on 1st and 2nd order triangulation in order to check the current triangulation points in Cheju area. After the GPS observation data analysis, stable points were extracted, proposed a geodetic network and its application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.167-173
• /
• 2011

This paper analyzes the procedure of calculating how the results of national control points (triangulation points), based on Bessel datum, have been transformed into those of KGD2002, based on the world geodetic system. GPS and EDM data observed from 1974 to 2008 were used for this purpose. A large-scale integrated GPS network was constructed to estimate the results of KGD2002 and new national control points about 12,000 were decided through multiple stages of data processing. The accuracy of these results is ${\pm}0.015m$ (95%) in the horizontal direction and ${\pm}0.030m$ (95%) in the vertical direction. The adjusted results verified by the construction of an integrated GPS/EDM network were compared with the results of KGD2002. In conclusion, the bulletin results are thought to be appropriate because the coordinate differences (RMSE) are ${\pm}0.0025m$ and ${\pm}0.008m$ in horizontal and vertical directions respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.141-150
• /
• 1996

A satellite positioning system has been recently introduced in Korea and the applications of the system are in-creasing gradually, and it is, therefore, interested in the geocentric coordinate system. In this paper, the requirements of the redefinition of the Korean geodetic system which is suited to the geocentric datum and the strategies for the establishment of new geodetic networks are considered. It is also taken into account to maintain the control points, in the transition from the old coordinate systems to a new coordinate system.