• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.131-136
• /
• 2000

Ocean Scanning Multi-spectral Imager (OSMI)는 다목적 실용위성 (KOMPSAT) 1호기 아리라위성에 탑재되어 1999년 12월 21일 발사된 해양 관측 기기이다. OSMI는 발사후 3년 이상 생물학적 해양지리학 연구를 위해 전세계 바다색을 관측하는 임무를 수행할 것이다. OSMI는 센서 성능의 궤도상 보정을 위해 태양광 보정과 암흑 보정을 수행한당. 태양광 보정은 궤도상에서 장기간에 걸친 해양 결상계의 노화에 따른 성능 변화 감지 및 보정에 있다. 발사 직후의 초기 태양과 보정 측정 자료는 추후 성능 변화 감지에 대한 기준이 될 뿐만아니라 발사 직후 OSMI 센서 성능 파악 및 점검에도 사용될 수 있으므로 매우 중요하다. 태양광 보정의 구조 및 광학적 특성을 분석하고 OSMI 주요 관측파 장대역별로 태양광 보정계의 출력신호량을 예측하였다. 초기 운영 기간동안 얻은 OSMI 태양광 보정계의 발사후 최초 측정 자료를 분석하고 발사전 예측 성능과 비교하였다. 이 연구는 OSMI 센서 보정 및 영상 품질 이해에 유용할 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.251-258
• /
• 1997

임계 근처에서 반응도 미터로 계단식 반응도 변화를 측정할 때는 중성자원과 감마의 영향 하에서도 정확한 반응도를 결정할 수 있으며, 중성자원과 감마를 측정할 수도 있다. 중성자원과 감마의 영향은 없으나 중성자 분포 함수만 변하는 경우에는 계산으로 예측한 분포 함수의 변화로 측정된 중성자 신호를 보정하여 반응도를 예측할 수 있다. 그러나 중성자원, 감마, 분포 함수가 복합적으로 작용하는 경우에 대하여는 이러한 방법을 적용할 수 없다. 이 매 중성자원과 감마의 영향만 있는 경우에 적용하는 방법을 쓰면 분포 함수의 변화가 측정 결과에 어떤 영향을 미치는지 분석하였다. 그 결과 분포 함수의 변화도 어느 정도 측정이 가능하며, 계산으로 예측하는 분포 함수의 변화로 측정 결과를 단순 보정하여 실제 반응도를 예측할 수 있는 것으로 나타났다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.329-334
• /
• 1997

기포막 제한 및 기포 군집 이론에 의한 해석적 접근을 통해 축방향 출력분포가 임계열속에 미치는 영향을 파악하고, 이를 근거로 임계열속 발생지점에서의 엔탈피 변화를 고려하여 축방향 출력분포에 따른 임계열속 예측치 보정 모델을 개발하였다. 제안된 모델의 검증을 위해 cosine 형태의 축방향 출력분포를 갖는 임계열속 측정치와 비교하였으며, 그 결과 제안된 모델은 측정치에 대해 평균 1.0072, 표준편차 9.98%의 예측 성능을 나타냈다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.580-582
• /
• 2000

본 논문에서는 MAM을 이용한 특징 벡터의 보정을 기반으로 하는 헤드 제스처 인식에 관해 기술한다. 제안된 시스템은 얼굴 움직임 검출 모듈과 눈 영역 추적 모듈, 미 측정된 벡터 보정 모듈, 측정된 제스처에 대한 인식모듈로 구성된다. 신경망과 모자이크 이미지를 이용하여 얼굴 영역을 검출하고, 이 영역에서 눈 영역을 검출한다. 만약 눈의 쌍이 검출되지 않는다면 시스템은 특징 벡터 보정(MAM)을 수행하여 손실된 정보를 예측한다. 검출된 눈 영역은 정규화된 벡터로 변경된다. 이 벡터의 분산을 이용하여 긍정, 부정, 중립의 제스처를 판단한다. 제스처의 인식은 직접 관측, 이중 HMM, 삼중 HMM을 사용한 다중 인식기를 이용한다.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.37-49
• /
• 2002

The accuracy of radiation dose delivery to target volume is one of the most important factors for good local control and less treatment complication. In vivo dosimetry is an essential QA procedure to confirm the radiation dose delivered to the patients. Transmission dose measurement is a useful method of in vivo dosimetry and it's advantages are non-invasiveness, simplicity and no additional efforts needed for dosimetry. In our department, in vivo dosimetry system using measurement of transmission dose was manufactured and algorithms for estimation of transmission dose were developed and tested with phantom in various conditions successfully. This system was applied in clinic to test stability, reproducibility and applicability to daily treatment and the accuracy of the algorithm. Transmission dose measurement was performed over three weeks. To test the reproducibility of this system, X-tay output was measured before daily treatment and then every hour during treatment time in reference condition(field size; $10 cm{\times} 10 cm$, 100 MU). Data of 11 patients whose pelvis were treated more than three times were analyzed. The reproducibility of the dosimetry system was acceptable with variations of measurement during each day and over 3 week period within ${\pm}2.0%$. On anterior- posterior and posterior fields, mean errors were between -5.20% and +2.20% without bone correction and between -0.62% and +3.32% with bone correction. On right and left lateral fields, mean errors were between -10.80% and +3.46% without bone correction and between -0.55% and +3.50% with bone correction. As the results, we could confirm the reproducibility and stability of our dosimetry system and its applicability in daily radiation treatment. We could also find that inhomogeneity correction for bone is essential and the estimated transmission doses are relatively accurate.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2011

As a check on calibration and drift in each discrete sub-system of a commercial frequency-domain airborne electromagnetic system, we aim to use causality constraints alone to predict in-phase from wide-band quadrature data. There are several possible applications of the prediction of in-phase response from quadrature data including: (1) quality control on base level drift, calibration and phase checks; (2) prediction and validation of noise levels in in-phase from quadrature measurements and vice versa and in future; and (3) interpolation and extrapolation of sparsely sampled data enforcing causality and better frequency-domain-time-domain transformations. In practice, using tests on both synthetic and measured Resolve helicopter-borne electromagnetic frequency domain data, in-phase data points could be predicted using a scaled Hilbert transform with a standard deviation between 40 and 80 ppm. However, relative differences between base levels between flight could be resolved to better than 1 ppm, which allows an independent quality control check on the accuracy of drift corrections.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.17-20
• /
• 2005

This paper presents an overview analysis on the observed wind shear at Pohang Steel Works, focusing on diurnal patterns and the frequency of high nighttime shear at the site in case of land breeze. In addition, this paper discusses the importance of accurate shear estimates for reliable evaluation of wind energy density. In order for a long-term correlation of the site, three Measure-Correlate-Predict methods were tested with Pohang wind data and it was shown that the linear MCP gives poor estimation due to the geographic characteristics of complex terrain where the severe transformation of wind direction was accompanied.

• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.26-33
• /
• 2005

This paper presents and overview analysis on the observed wind shear at Pohang Steel Works. focusing on diurnal patterns and the frequency of high nighttime shear at the site in case of land breeze. In addition, this paper discusses the importance of accurate shear estimation for reliable evaluation of wind energy density. In order for long-term correlation of the site, three Measure-Correlate-Predict methods were tested with Pohang wind data and it was shown that the linear MCP gives poor estimation due to the topological characteristics of complex terrain where the severe transformation of wind direction was accompanied.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.67-74
• /
• 2016

The yield shear strength of bolt connection in glass fiber reinforced glulam was predicted using a design-based equation, and was compared to the empirical yield shear strength. For the predicted equation, the mechanical properties of member (the elastic modulus, Poisson's ratio, shear modulus) was tested. The fracture toughness factor ($K_{ft}$) of glass fiber reinforced glulam was reflected to the revision of the design equation of bolted connection. The compressive strength properties to grain direction was influenced by annual ring angle and width of lamina. Compared with the revised yield shear strength of reinforced glulam, it was tended to be similar to the empirical yield shear strength on the diameter of bolt and the reinforcements. The revised yield shear strength from proposed formula of KBC was most appropriately matched in the bolt connection of the glass fiber reinforced glulam.