• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.35-41
• /
• 2009

This study was conducted to investigate feasibility of feedstuff for animal using food waste by fermentation mechanism of indigenous microorganism. To achieve this purpose, indigenous bacteria was isolated from soils to use as an inoculant. Enzyme test was performed to verify activity of amylase, protease and lipase using isolated bacteria. Bacteria(H1, D1), which vigorously express the enzyme activity, was selected and used in the fermentation experiments of food waste. From the analysis of 16s rDNA sequencing, H1 and D1 were identified as Bacillus subtilis and Paenibacillus polymyxa, respectively. In the fermentation experiment, food waste was mixed with rice bran and popped rice to control moisture and nutrient content. Isolated bacteria(B. subtilis and P. polymyxa) was used as an inoculant. From the measured data such as temperature, pH and ORP, it can be verified that food waste adding the indigenous bacteria was effectively fermented. From the nutritional analysis of manufactured feedstuff, it showed that the contents of crude protein, crude fat and crude fiber were enough to use as feedstuff for animal. In addition, harmful components such as Pb, Hg, Cd, aflatoxin and salmonella concentration were not exceeded permitted standards. Therefore, fermented food waste using indigenous bacteria can be used as feedstuff.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.373-384
• /
• 2009

For the first step on the quantitative evaluation of shrinkage reduction and differential shrinkage analysis of lightweight aggregate concrete, this study sets the moisture transport model of concrete by pre-absorbed water of porous lightweight aggregates and measured effective moisture diffusion coefficient, moisture capacity, degree of humidity supply and degree of humidity consumption by water binder ratio and aggregate type. The effective moisture diffusion coefficient in steady state caused by humidity difference between inside and outside of concrete had low value as low water-binder ratio. And in case of same water-binder ratio, effective moisture diffusion of mixtures used normal aggregates were lower than those used lightweight aggregates. To determine moisture store capability of concrete - moisture capacity, moisture contents were measured in 9 humidity conditions. As a result moisture contents of mixtures used lightweight aggregates was higher than mixtures used normal aggregates in all humidity conditions. This study measured lightweight aggregates' degree of humidity supply that applicable to normal atmospheric environment (above RH 50%) and made it quantitatively. Also amount of moisture release was set as a exponential function that represents a clear trend proportion to time and inverse proportion to humidity of the surroundings. As the result of measurement about degree of moisture consumption inside concrete following the internal consumption caused by cement hydration self-drying, it was showed that rapid decrease of humidity, around 10%, at early ages (7~10 days) when water-binder ratio is 0.3 and slow decrease around 5% and 1% when water-binder ratio is 0.4 and 0.5.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1625-1634
• /
• 2000

Verification of measurements is required for precise evaluation of turbine cycle performance in nuclear power plant. We assumed that initial acceptance data and design data of the plant could provide correlation information between performance data. The data can be used as sample sets for the correct estimation model of measurement value. The modeling was done practically by using regression model based on plant design data, plant acceptance data and verified plant performance data of domestic nuclear power plant. We can construct more robust performance analysis system for an operation nuclear power plant with this validation scheme.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.409-416
• /
• 2005

We need to develop a on-line thermal performance analysis system for nuclear power plant to determine performance status and heat rate of turbine cycle. We have developed PERUPS(PERformance Upgrade System) to aid the effective performance analysis of turbine cycle. Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on PTC(Performance Test Code). Robustness in the on-line performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful web interfaces for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis report. The system was successfully applied for YongGwang nuclear plant unit #3,4.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.412-417
• /
• 2003

작물의 생장상태를 측정하고자 기존의 연구자들에 의해서 많은 연구가 수행되고 있다. 그러나 작물의 생장을 감시하기 위한 기존의 방법은 파괴적이며 지속적이지 못하다는 단점을 지니고 있다. 작물이 생장 장해를 받아 눈에 띄게 작물의 생장변화가 보일 경우 작물은 이미 영구적인 손상을 받게 진다. 따라서 이런 작물의 생장 장해를 조기에 진단하여 작물의 생장 장해에 능동적으로 반응할 수 있는 방법의 개발이 절실히 요구된다. (중략)

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.300-304
• /
• 2002

한국여성의 외의용 의류소재에 주관적인 태를 조사하기 위하여 계절별(춘하, 추동)로 총 230여 종의 직물을 수집하고, 1차로 87종의 직물에 대하여 20, 30대 전문가에게 태에 관한 용어를 9가지 조사동작을 통하여 수집하였다. 수집한 용어를 의미별로 추출하여 정리하였고, 태를 수집하기 위한 동작에 따른 용어의 차이를 비교하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.478-482
• /
• 2021

In this paper, methods for manufacturing shielding concrete by recycling steelmaking slag discarded as industrial waste and measuring the shielding effectiveness of the shielding concrete were studied. By comparing the result of shielding effectiveness measurement of this concrete block with shielding effectiveness measurement of the structure constructed with this concrete, the measurement system for measuring shielding effectiveness of the concrete block was verified. The size of the concrete stru ctu re is 2.9 × 2.9 × 3.4m and the concrete block is 0.3 × 0.3 × 0.2m. The frequ ency band u sed for mesu rement is 600MHz - 2GHz, the types of concrete u sed to measu re the shielding effectiveness are general concrete and concrete containing electric arc furnace oxidizing slag. In the case of the concrete structure, reinforcing rebars are installed at intervals of 15cm for stru ctu ral safety, as the frequ ency increase, the electromagnetic wave properties of rebars gradu ally decreased, there was a slight difference in the measurement results. In conclusion, the measurement result of shielding effectiveness of the concrete block is similar to the result of the concrete structure. It is thought that it can be sufficiently utilized for electromagnetic wave engineering design, and the concrete shielding effectiveness measurement system using standard specimens was verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.241-248
• /
• 1998

The accurate measurement of the room sound level is required in environment noise control. However, it has been found that the measurement system noise always corrupts the actual noise from the sound source. In this study, a new sound level measurement technique in which the system noise is eliminated from the measured signal by the cross spectrum method, is proposed. The received signals of two measuring microphones are recorded to DAT through the pre-amplifier and digitized by A/D converter. The cross spectrum calculated from the digitized signals gives the accurate sound level since the system noise is uncorrelated with the sound source noise which we want to measure. The performance of the proposed technique is verified experimentally to be effective and the technique is found to be economic since the low cost general purpose microphone could be used in this technique.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.143-149
• /
• 2007

영상은 동적인 시각 이미지와 청각의 결합에 의해 감성적인 반응을 유도한다. 다양한 영상 기법을 통하여 감성적 반응의 극대화를 추구하는 영화는 영상의 시청각적 요소들을 감성의 관점에서 효과적으로 설계하는데 본보기가 된다. 그러나, 제품의 설계속성들에 대한 감성적 평가결과를 모형화하는 감성공학적 관점에서 볼 때 영화는 시청각적 자극의 수준이 극히 다양하고 동적인 경험재로 모형화의 어려움이 있다. 본 연구에서는 영화의 감성 모형을 구축하기 위한 사전연구의 단계로 영화에서의 시청각적 요인들을 문헌조사를 통해 수집, 정리, 선별하고 이러한 시청각적 요인들 중에 영화를 관람하는 관객의 감성적, 인지적 반응에 영향을 주는 유효한 요인들을 객관적이고 체계적으로 탐색하고자 하였다. 이를 위해, 감성 및 인지적 반응의 변화를 생체신호를 통해 측정하는 한편, 생체신호의 측정 시 사용된 영화의 시청각적 자극요인을 Video/Audio Processing방법에 의해 연속적인 수치로 정량화하였다. 생체신호와 정량화된 시청각적 자극요인을 동기화하고 통계적으로 분석함으로써, 생체신호의 반응과 시청각적 자극요인과의 인과관계를 통계적으로 신뢰성있는 수준에서 검증하고자 하였다. 생체신호를 종속변수로, 시청각적 자극요인을 독립변수로 하는 896개의 부분선형회귀모형(Partial Linear Regression Model)들 중 통계적으로 유의한 선형관계에 있는 경우의 빈도분석에 의하면, 시각적 요인들 중에는 밝기(Brightness), 대비(Contrast), 색상(Color), 움직임(Motion), 장면전환속도(Shot change Rate), 주요대상의 상대적 크기가, 청각적 요인들 중에는 Peak주파수, Peak주파수의 음량, 평균음량, 소음비(Sound-to-Noise Ratio)가 생체신호의 변화에 통계적으로 유의한 영향을 주는 것으로 나타났다. 이는, 위의 시청각적 자극 요인들은 특히 관객의 감성 및 인지적인 반응에 유의한 영향을 주는 요소로 작용할 수 있음을 시사하고 있다. 이를 토대로, 위의 시청각적 자극 요인들이 가지는 다양한 조합들을 설명변수로 하는 통계적인 영화의 감성 모형을 구축할 수 있을 것으로 기대한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.98-105
• /
• 1989

To characterize the biological tissue, the new method to measure the ultrasonic velocity is presented in this paper. The influence of the dispersion effect on the estimation of the ultrasonic velocity is mostly neglected. A more efficient method determining the minimum phase spectrum is developed to characterize the frequency dispersion form the spectral magnitude function. To eliminate the frequency dispersion, the signal-decomposition method is also proposed. Computer simulations are performed to verify the algorithms.