• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.7-12
• /
• 2013

In this paper, we propose a brushless DC motor drive system for active knee prosthesis and low-cost estimation method for phase current from DC-link current. To control motor torque directly, current sensing is very important and current sensing point should be synchronized with voltage switching command to minimize the effect of switching noise in current measurement, For maintaining small form factor, simplifying control schemes and achieving low-cost system, control schemes using DC-link current are used. Moreover, we incorporated phase current estimation method using analog MUX for minimizing current estimation error between DC-link current and phase current. The validity of the proposed system is verified through experimental works.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.56-56
• /
• 2003

최근 정보통신 분야의 급격한 발달로 인하여 무선통신에 사용되는 주파수 영역 또한 계속 높아짐에 따라 대역통과 필터 소자의 삽입 손실, 소비 전력, 크기, MMIC화에 대한 많은 연구가 진행되고 있다 압전 현상을 이용한 박막형 공진기가 이러한 요구를 충족시키고, 현재의 SAW filter를 대체할 소자로 떠오르고 있다. 본 실험에서는 단결정 미세 구조를 만들 수 있고, 압전 효과 또한 우수하며, Surface Micromachining보다 비교적 제조 공정이 간단하고 선택적 에칭이 가능한 Bulk Micromachining을 이용하여 Si$_3$N$_4$ Membrane을 이용한 중심주파수 5.2GHz인 두께 진동모드 Film Bulk Acoustic Wave Resonator(FBAR)를 제작하고 공진기의 고주파 특성을 평가하였다. Membrane구조 형성을 위해 Backside면인 Si$_3$N$_4$, Si은 RIE(Reactive Ion Etching)와 선택적 에칭용액인 KOH로 각각 에칭하여 Membrane을 갖는 구조로 중심주파수 5.2GHz인 두께 진동모드 FBAR를 설계 및 제조하였다. 체적 탄성파 공진 현상은 r.f Magnetron Sputtering법으로 증착한 AIN 압전박막과 Mo전극으로부터 발생 가능하였다. 본 연구에서는 0.9$\mu\textrm{m}$-Si$_3$N$_4$ Membrane을 이용해 FBAR를 제작/평가하고, RIE을 통해 Membrane을 제거해 가면서 공진기의 특성 즉, Quality factor와 유효전기기계결합계수(K$_{eff}$) 및 S parameter특성을 비교 측정해 보았다. 측정해본 결과 Membrane Free일때가 훨씬더 공진 특성이 우수함을 볼 수 있다

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.29-32
• /
• 2004

In this study, we had modelled Siemens type MLC using BEAM Monte Carlo code and tested the feasibility of the modelling. To model the Primus linac MLC, we had measured the actual dimensions of MLC and each leaves, then approximated the leaf shape. VARMLC component module was used for the modelling and leakage, tongue-and-groove effect were also considered. Simulation result showed the good agreement with the film measurement.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.477-478
• /
• 2007

본 논문에서는 압력 온도 센서를 이용하여 수면자의 수면상태를 인식하고 이를 감지할 수 있는 수면상태 감지 시스템을 제안하였다. 기존의 수면상태를 측정하는 방법에 있어 문제점으로 들 수 있는 고가의 장비, 측정의 불편 등을 해소하기 위해 사용이 간단한 Straingage 타입의 압력센서와 프로브 타입의 온도센서를 이용하여 저비용의 효율적인 시스템을 구현 하였고, 수면 매트에 실세 적용하여 그 유효성을 평가하였다. 제안된 시스템은 압력 온도센서를 이용해 수면 매트부, 센싱데이터를 감지 수집하여 수신된 데이터를 증폭하는 수면상태 감지정보 시스템부로 구성되었다. 시스템 구축을 위해 먼저, 수면 매트부는 비접촉 방식의 압력 온도 센서를 사용하였고, 수면상태 감지정보 시스템부는 미세한 변화를 보이는 데이터를 차등 증폭기 원리를 이용하여 증폭하였다. 센서가 수면자에 의해 변환할 때 발생되는 아날로그 신호를 검출 증폭한 후 감지하는 시스템이다. 본 연구에서 세안한 수면상태 감지 시스템을 이용하여 개인생환 습관인 수면시간을 실시간으로 감지하고 데이터화하여 수면자의 수면 상태를 파악하여 건강한 수면을 위한 방법을 권고할 수 있다. 향후 감지된 데이터를 이용해 실시간으로 가족들의 수면상태를 알릴 수 있는 헬스케어 모바일 응용 서비스로도 활용이 기대된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.285-290
• /
• 2006

The evaluation of clamping condition has been regarded as the main issue in the safety-maintenance of the clamped high-tension bolts. For this, this paper proposes a method to estimate the axial stress by measuring the TOF (Time-Of-Flight) of ultrasonic wave, which is based on the acoustoelasticity or the dependency of sound speed on the stress. In this method, however, the variation of sound speed within the range of stress induced under the field condition is very small, and thus the accuracy of the TOF measurement is important. We adopted the phase detection method using tone-burst ultrasonic wave to measure the precise TOF. In order to verify the usefulness of the proposed method experiments are carried out and the results were compared with the stress measured by the strain gage. The results show good agreement with each other, and from these we can conclude that the proposed method is highly useful fnr the evaluation of clamping condition in the clamped high-tension bolts.

• Journal of Korea Game Society
• /
• v.18 no.4
• /
• pp.33-42
• /
• 2018

Virtual reality can user experience the virtual world of computer and stimulate user eyesight and emotions. HMD can acquire and stimulate user behavior and sensory information. In this paper, we propose a virtual reality game using robot control. Controlling the robots using various interfaces and synchronizing them with the virtual reality game. In this paper, we use OID mat for robot movement detection based optical code recognition and Kalman filter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.3
• /
• pp.506-512
• /
• 2000

건조 농산물을 비롯한 식품에 대한 방사선 조사가 허가, 시행되고 있으며, 그 적용 범위도 확대되고 있다. 이에 따라 건조 생약재의 위생화의 대체방법으로 방사선 조사 기술의 적용이 산업계로부터 요구되고 있다. 본 연구는 감마선 조사 생약재의 효능 변화 유무를 확인하기 위한 일환으로 수행되었다. 저자 등은 사물탕, 보중익기탕 및 삼령백출산 등이 방사선 방호 효과를 보이는 것으로 이미 보고한 바 있다. 본 실험에서는 감마선 조사(10 kGy)한 이들 한약제 각각의 방사선 방호 효과를 비조사 시료와 비교 평가하였다. 효과평가를 위하여 방사선 조사 마우스에서 소장움 생존시험, 내재성 비장집락 형성시험 및 apoptosis 측정을 시행하였다. 각 한약제의 감마선 조사 시료는 3가지 시험 모두에서 비조사 시료와 유사한 효과를 나타내었으며(p<0.05), 생체내 독성도 나타내지 않았다. 이는 생약재의 여러 가지 고유 효능 중 일부의 안정성으르 확인한 것으로 생각되며, 이 결과로 미루어 보아 감마선 조사 생약재의 효능 안정성은 한의학적 고유의 효능 비교 평가를 통하여 확인될 수 있을 것으로 사료된다. 한편, 저자 등은 감마선 조사 생약재의 유효성분 안정성 및 유전 독성학적 안전성을 확인하여 보고한 바 있다. 이들 결과를 토대로 향후 감마선 조사 행약재의 고유 효능의 안정성에 관한 체계적인 연구결과를 얻는다면 생약재의 위생화 수단으로 감마선 조사기술의 이용이 실용화될 수 있을 것으로 사료된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.591-597
• /
• 2003

In this paper, a compact and broadband PIFA(Planar Inverted F Antenna) which has an additive short-circuit plate along the patch length was designed. For more compact PIFA short-circuit Plate along the patch width is reduced and an additive short-circuit plate along the patch length is used to broaden the bandwidth. The effect of an additive-short-circuit plate along the patch length was verified in single band PIFA and also verified in dual-band PIFA. The commercial software, IE3D, was used to design a PIFA and its performance was verified by comparing simulated results with measurement results.

• Journal of Nutrition and Health
• /
• v.52 no.5
• /
• pp.475-487
• /
• 2019

Purpose: With the increase of going out to eat, reducing the sodium in restaurant foods has a crucial impact on reducing sodium intake. This study aimed to assess the current status and perceptions of restaurant staffs related to reducing sodium use in restaurants. Methods: Restaurant managers and chefs (n = 312) in Seongnam area completed a questionnaire on the current status related to sodium use, the barriers to practice for reducing sodium use, support needs, and the practicability of methods for reducing sodium use in restaurants. Results: The percentage of restaurants in the preaction stage (including the precontemplation, contemplation, and preparation stages) for reducing sodium use was 79.7%. Logistic regression analysis showed that measuring salinity while cooking was associated with measuring seasoning (OR, 4.761; 95% CI, 2.325 ~ 9.751), action/maintenance stages of behavior change (OR, 2.829; 95% CI, 1.449 ~ 5.525) and providing salinity information of restaurant foods (OR, 6.314; 95% CI, 2.964 ~ 13.45). Maintaining taste and hindering the cooking process were the main barriers to reduce sodium use. The total practicability of actions for reducing sodium was higher in staffs who worked in restaurants that measured seasoning and salinity while cooking (p < 0.05 and p < 0.01, respectively). The hardest item to practice was 'purchase foods after comparing sodium content in the nutrition labeling'. 'Avoid serving salt-fermented foods as side dishes', 'serve small portions of kimchi and less salty kimchi', and 'put up promotional materials for reducing sodium intake' were selected as easy items to perform. The majority (82%) was willing to reduce sodium in restaurant foods under the support of local government and they desired the promotion of participating restaurants and education on cooking skills to reduce sodium. Conclusion: Measuring seasoning and salinity while cooking is a meaningful practice that is associated with stages of behavior change and the practicability of actions for reducing sodium. It is necessary to provide support and education with a gradual approach to staffs for reducing sodium in restaurant foods.

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.267-275
• /
• 2023

Botanical extracts are employed in management of aphids. Extracts from Tanacetum cineariaiaefolium, Derris elliptica, and Sophora flavescens are widely used to control various insects. In this study, we determined concentrations of insecticidal active ingredients in commercial botanical extracts of these plants, and we investigated the time and concentration for lethal results with the green peach aphid, Myzus persicae. The concentrations of active ingredients, pyrethrins from T. cineariaiaefolium, rotenone from D. elliptica, and matrine and oxymatrine from S. flavescens, were determined after their fractionation by liquid chromatography followed by mass analysis and comparison with standard compounds. The extracts were tested for lethality in a bioassay with green peach aphids. Sprays at defined doses were applied to tobacco leaves infested with aphid nymphs. The lethal concentrations (LC50) were 20.4 ppm for pyrethrins, 34.1 ppm for rotenone, and 29.6 ppm for matrine at 48 h after treatments. At 100 ppm application levels, the lethal time LT50 was 13.4 h for pyrethrin, 15.1 h for rotenone, and 14.4 h for matrine. Kaplan-Meier analysis indicated the lethal times for the three botanical extracts at 100 ppm were significantly faster than application of a chemical insecticide, Sulfoxaflor, applied at the recommended level. These results provide baselines to develop and formulate single or mixed preparations containing botanical extracts to control green peach aphids on commercial crops.