• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.231-238
• /
• 2007

This paper describes the availability of the forthcoming integrated GNSS(Global Navigation Positioning System) positioning that includes GPS(Global Positioning System), Galileo, and QZSS(Quasi-Zenith Satellites System). We built a signal propagation model that identifies direct, multipath, and diffraction signals, using the principles of specular reflection and ray tracing technique. The signal propagation model was combined with 3D GIS(three-dimensional geographic information system) in order to measure the satellite visibility and positioning error factors, such as the number of visible satellites, average elevation of visible satellites, optimized DOP(dilution of position) values, and the portion of multipath-producing satellites. Since Galileo and QZSS will not be fully operational until 2010, we used a simulation in comparing GPS and GNSS positioning for a $1km{\times}1km$ developed area in Shinjuku, Tokyo. To account for local terrain variation. we divided the target area into 40,000 $5m{\times}5m$ grid cells. The number of visible satellites and that of multipath-free satellites will be greatly increased in the integrated GNSS environment while the average elevation of visible satellites will be higher in the GPS positioning. Much decreased PDOP(position dilution of precision) values indicate the appropriate satellite/user geometry of the integrated GNSS; however, in dense urban areas, multipath mitigation will be more important than the satellite/user geometry. Thus, the efforts for applying current technologies of multipath mitigation to the future GNSS environment will be necessary.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.1
• /
• pp.127-143
• /
• 2020

The purpose of this study is to develop the clothing safety teaching/learning plan in Home Economics based on the health belief model and to examine the effects of the course using the developed teaching/learning plan on the health belief. Based on ADDIE model, 6 clothing safety teaching/learning plans were developed by applying the health belief model. They consisted of three learning factors of 'harmful substances that can be exposed during the production, wear, wash, and storage of clothes and textile products', 'environment friendly fibers' and 'natural detergents'. Then they were implemented on 7 classes in middle school located in Gyeonggi-do Province from August 20 to September 7 in 2018. The health beliefs data collected before and after the course were analyzed with paired t-test with SPSS/win. As a result, the perceived threat(combination of perceived severity and perceived susceptibility), the perceived benefit, and the self-efficacy were significantly improved. And the perceived barrier was significantly reduced. In conclusion, the home economics clothing safety education course using the health belief model was meaningful as the safety education to enable middle school students to practice safe clothing life from harmful substances. The results of this study are expected to be helpful for activating safety education in home economics.

• The Korean Journal of Elementary Counseling
• /
• v.9 no.2
• /
• pp.143-162
• /
• 2010

The purpose of this study is to construct Parent Attachment Scale for Children. Adapting the item consisting method used in Experiences in Close Relationships-Revised(ECR-R), Parent Attachment Scale for Children was constructed to measure child's attachment style with their parent, reliably and validly. Also, reliability and item trait informations based on item response theory were reviewed. First preliminary items were derived from the original items of ECR-R and existing Attachment Inventories. These items were modified and complemented to be easier and keep the original meaning of each item. Second preliminary items were administrated to 4~6th grades students(N=576). Finally, Parent Attachment Scale for Children were consisted with 30 items based on two-parameter graded response model. Internal consistency ranges of the scales of Parent Attachment Scale for Children are as follows : Avoidance scale is .94~.96; Anxiety scale is .85~.88. Test-retest reliability ranges are as follows; Avoidance scale is .71~.80; Anxiety scale is .53~.68. Item discrimination and item information value were within an appropriated range. Hierarchical cluster analysis with Ward's Method revealed four types of attachment style : Secure, Dismissing, Preoccupied, Fearful. Other implications and limitations of this study were discussed.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.521-539
• /
• 2009

This study investigates the time-space characteristics of the road traffic flows in Seoul and the relationship with land use patterns. For the purpose, we analyze the road traffic data collected at 118 observation sites over Seoul City area since 1993. We examine the time-trend of the annual average traffic flows per day during the last fourteen years. Three different trends are revealed: rapid increase during the time period between 1993 and 1997, maintenance same level after sharp decrease between year 1997 and 1998, and gradual decrease after sharp decrease between year 2003 and 2004. The spatial distribution patterns of road traffic flows have also been changed significantly during the period. The traffic flows in the urban center have been declined gradually, while the traffic flows in the boundary area and southern CBDs have increased dramatically. In order to examine the relationship with the changes in the land-use patterns and road traffic flows, we analyze the changes in the spatial distribution patterns of population and industries. We developed three multiple linear regression models to test the relationships between the changes in the land-use variables and road traffic flows.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1997

본 연구에서는 용액성장법에 의해 양자 입자로 구성된 CdS 박막을 슬라이드 유리기 판위에 성장시키고 이들의 구조적 광학적 특성에 대하여 연구하였고 이들 결과를 토대로 용 액성장법으로 성장된 CdS 박막의 양자 사이즈 효과에 대하여 연구하였다. 성장시간은 1, 3, 10, 20분이었고 성장온도는 75$^{\circ}C$였다. X-선 회절 분석결과 본 연구에서 합성된 CdS 박막은 hexagonal상의 결정구조를 갖는 것으로 나타났고 성장시간에 따라 막의 투께는 61~195nm, 입자사이즈는 8.5~22.5nm로 나타났다. 광에너지 변화에 따른 투과도 측정결과 본 연구의 CdS 시료는 성장시간에 따라 에너지 밴드갭이 2.43~2.51 eV로 나타나서 벌크 CdS의 에너 지 밴드갭인 2.42 ev보다 높은 에너지 밴드갭을 갖게 되어 양자 사이즈 효과에 의한 blue shift 현상이 용액성장법에 의해 합성된 CdS 시료에도 존재한다는 것이 밝혀졌다 그리고 이 같은 용액성장법으로 성장된 CdS에 대해 최초로 수행된 Raman 산란 실험결과 이성장방법 으로 성장된 CdS에는 1TO, E2, 1LO 포논 모드가 존재함을 알수 있었고 또한 입자 사이즈 감소에 의한 1LO포논 모드의저주파수 shift 현상 즉 포논 모드의 softening 현상이 있음이 밝혀졌고 softening은 최대6.2%까지 발생하였다. 이와같은 높은 softening은 본연구의 CdS 박막 내 양자 입자의 입도가 작은것에 기인하는 것으로 밝혀졌다. 또한 본 CdS 시료의 양 자 사이즈 효과의 결과로 1TO 포논도 나타났는데 이 1TO 포논과 E2 포논의 Raman shift 는 성장시간 즉 막의 두께와는 무관한 것으로 나타났다.행렬모형(二重比例行列模型)을 이용하여, 산업구조의 변화로 인한 직업별 인력수요 변화가 충분히 고려되도록 하였다. 전망의 결과에 따르면 향후 우리 경제는 지식기반경제(knowledge-based economy)로 이행하고 있다고 볼 수 있다. 우선 산업구조면에서 지식집약적산업으로의 구조조정이 일어나게 되고 이에 따라 산업별 취업구조에서도 고기술산업의 취업준비중이 급속히 증가하게 된다. 직업별 취업분포에 있어서도 전문기술직 행정관리직 등의 고숙련 사무직의 비중은 크게 증가하는 반면 생산관련직과 농림어업직의 비중은 감소하게 된다. 이처럼 경제가 지식집약화되어 감에 따라 고학력자에 대한 수요는 지속적으로 증가하지만 현재 적절한 인력양성과 공급이 이루어지지 않고 있어 향후 기술이나 기능에 따른 수급부일정(需給不一政)(skill mismatch)현상이 매우 심해질 것으로 보인다. 따라서 앞으로의 인력정책에서 가장 주안점을 두어야 할 부분은 첨단기술산업과 관련된 인력의 양성에 있다고 하겠다.2시간까지 LPDG용액은 MEC용액보다 비교적 나은 회복을 보였고 재관류 3일과 7일의 폐기능 평가에서 두 용액 모두에서 폐기능의 점차적 소실을 보였으며 이는 병리조직검사에서 보듯이 폐혐에 의한 외적인 요소라고 생각되며 따라서 LPDG용액은 허혈재관류손상 방지 및 급성폐렴 등 염증을 잘 관리한다면 20시간 이상 LPDG용액의 안전한 폐보존의 가능성 을 얻을 수 있었다.ic 형태로 외래유전자가 발현되었지만 대조구에서 87.0% (26/30개) 배반포기가 $\beta$-Gal 활력을 보인 반면, G418 처리구에서는 모든 배반포기가 $\beta$-Gal 활력을 보였다 (P<0.05). 그러나 대조구 및 G418 처리구의 ICM

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.451-459
• /
• 2002

High strength flour (12.5% protein) and low strength flour (10.5% protein)were used to determine optimum formulation far steamed bread added with green tea powder (GTP). The response surface study consisted of the following independent variables : GTP (1.5∼4.5%), mixing time (8∼14 min), fermentation time (30∼50min). Bread Quality attributes measured for total bread score of each combination were loaf volume, spread ratio, surface glossiness, smoothness, grain and texture (firmness, cohesiveness, elasticity and adhesiveness). The required amount of GTP, mixing time and fermentation time for steamed bread made from two kinds of flour were different. GTP could be more added to lower strength flour than higher strength flour without losing bread quality. GTP highly affected the loaf volume, spread ratio, surface smoothness, firmness and total bread score of steamed bread (p<0.001). The results suggested that the functional steamed bread added with GTP having excellent quality can be made from low strength flour using green tea powder 3.2%, mixing time 11 min 8 sec and fermentation time 39 min 55 sec.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.129-138
• /
• 2016

Shipping companies involved in sea transportation service are exposed to uncertainty due to its volatile business environment. It is crucial that shipping companies take effective strategies to cope with uncertain business environments and to achieve high business performance. Using Porter's generic strategy, this study investigates the relationships between environmental uncertainty and competitive strategies, and the impact of competitive strategies on firm's business performance. To test hypotheses, OLS regressions and Tobit analysis were conducted on Korea shipping companies who provide global sea transportation service. The findings of this study can be summarized as follows. First, variation of environmental uncertainty affects cost-leadership strategy and differentiation strategy. Diversity of environmental uncertainty affects differentiation strategy, but not cost-leadership strategy. Second, firms attain business performance by using the cost-leadership strategy. That is, shipping companies can achieve high business performance by reducing their operating costs in the entire process of transportation service.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.294-302
• /
• 2005

The purpose of this study was to evaluate the canal configuration after shaping by ProFile. ProTaper and K-Flexofile in simulated resin canals with different angles of curvature. Three types of instruments were used: ProFile. ProTaper. K-Flexofile. Simulated root canals. which were made of epoxy resin. were prepared by ProFile. ProTaper with rotary instrument using a crown-down pressureless technique. and hand instrumentation was performed by K-Flexofile using a step-back technique. All simulated. canals were prepared up to size 25 file at end-point of preparation. Pre and post instrumentation images were recorded with Scanner. Assessment of canal shape was completed with Image Analysis program. Measurements were made at 1. 2. 3. 4. 5. 6. 7. 8. 9 and 10mm from the apex. At each level. outer canal width. inner canal width. total canal width. and amount of transportation from original axis were recorded. Instrument deformation and fracture were recorded. Data were analyzed by means of one-way ANOVA analysis of variance and the Sheffe's test. The result was that ProFile and ProTaper maintain original canal shape regardless of the increase of angle of curvature than K-Flexofile. ProFile show significantly less canal transportation and maintained original canal shape better than ProTaper.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.393-412
• /
• 2015

See and feel the emotion recognition is the image of a person variously changed according to the environment, personal disposition. Thus, the image recognition has been focused on the emotional sensibilities computer you want to control the number studies. However, existing emotional computing model is numbered and the objective is clearly insufficient measurement conditions. Thus, through quantifiable image Emotion Recognition and emotion computing, is a study of the situation requires an objective assessment scheme. In this paper, the sensitivity was represented by numbered sizes quantified according to the image recognition calculation emotion. So apply the principal attributes of the color image emotion recognition as a configuration parameter. In addition, in calculating the color sensitivity by applying a digital computing focused research. Image color emotion computing research approach is the color of emotion attribute, brightness, and saturation reflects the weighted according to importance to the emotional scores. And free-degree by applying the sensitivity point to the image sensitivity formula (X), the tone (Y-axis) is calculated as a number system. There pleasure degree (X-axis), the tension and position the position of the image point that the sensitivity of the emotional coordinate crossing (Y-axis). Image color coordinates by applying the core emotional effect of Russell (Core Affect) is based on the 16 main representatives emotion. Thus, the image recognition sensitivity and compares the number size. Depending on the magnitude of the sensitivity scores demonstrate this sensitivity must change. Compare the way the images are divided up the top five of emotion recognition emotion emotions associated with 16 representatives, and representatives analyzed the concentrated emotion sizes. Future studies are needed emotional computing method of calculation to be more similar sensibility and human emotion recognition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.609-618
• /
• 2017

This paper presents the quantitative evaluation method for technologies acquired from the defense offset program. We firstly deduced the consideration in development by gathering the opinions of 128 experts by conducting a survey. Next, we made up an additional 49 experts for developing a performance management system of the offset program. The management system covered 4 technology fields which are defense R&D, depot maintenance, performance improvement, and manufacturing. The development procedure was composed of 4 parts: setting-up of work process, defining performance indicators, calculating weighted values of each indicator, and devising quantitative method. The results of this research could be used for enhancing the effectiveness of the offset program in 3 ways: establishing a systematic work process after acquisition of technology in offset program, establishing the positive feedback architecture by providing incentives to superior institute or company which is appointed through quantitative performance evaluating, and publicizing and promoting quantified outstanding performances for contributing to advance the offset program.