• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.487-491
• /
• 2016

영산강 섬진강수계는 1999년 한강수계(경기도 7개 시군)에서 임의제로 도입한 이후 2002년 낙동강, 금강수계와 함께 의무제 기반으로 오염총량제를 추진하고 있다. 이에 따라 2004년부터 영산강물환경연구소에서 영산강 섬진강수계의 단위유역 말단 지점의 유량과 수질을 약 8일 간격으로 동시에 측정함으로서 단위유역 내 오염원으로부터 배출된 오염물질이 말단에서 실제 나타나는 오염부하량(유달부하량)의 파악이 가능하게 되었다. 그러나 최근 4대강사업으로 하천의 구조적 수질관리 환경의 커다란 변화가 있어 기존 모니터링지점에 대한 전면적인 재검토가 필요하게 되었다. 본 연구에서는 영산강 섬진강수계의 수질총량측정망 총 56개 지점을 대상으로 설치목적과 선정기준에 대한 적합성평가를 위한 평가기법을 공간적 대표성, 수리학적 안정성, 시간적 대표성, 정보취득 안정성의 4개 특성과 13개 평가부문, 20개 평가항목으로 3단계 평가기법으로 구성하여 개발하였으며 평가 결과, I등급이 29개소(53%), II등급이 25개소(45%), III등급이 2개소(3%)로 평가되었으며, 변경 및 폐쇄 권장에 해당하는 IV~V등급으로 평가된 지점은 없는 것으로 평가되어 대체로 우수한 지점들로 구성되어 있음을 확인하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.143-152
• /
• 2023

In this research, the microwave oven drying method was investigated as a potential accurate testing approach for determining the water content of fresh concrete. To do so, water content estimation formulas employed in three prominent oven drying test methods were selected, and the calculation principles for each equation, along with potential error factors arising during the actual testing process, were considered. Moreover, a concrete test was conducted to validate the possible error factors. Consequently, it was confirmed that estimation errors in the water content of fresh concrete can occur due to sample deviations arising during the wet screening process for creating mortar specimens or deviations in the coarse aggregate sampling quantity during the sample collection process.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.11-16
• /
• 2013

Success or failure of the bi-directional pile load test for drilled shaft depends on point selection for loading cells, that is balanced location both uplift force and downward force. Methods to evaluate the ultimate unit side resistance in rockmass layer in both domestic and foreign are based on the uniaxial compression strength of rock core, which can hardly be obtained in domestic rockmass layers which are weathered rockmass layer and soft rockmass layer with very low RQD. Therefore, this study suggested the relation charts between the revised SPT N values and developed unit side resistance of each different layers, which were obtained from bi-directional pile load tests in various domestic sites. To evaluate the appropriateness of the relation charts, the developed unit side resistances from the relation charts were used to select the loading cell position and compared with the measured unit side resistances from field pile load test. Results showed that the developed side resistance from relation charts and the measured side resistance of weathered soil layer and weathered rock layer were very close. Average developed side resistance($1,325kN/m^2$), which are average of upper soft rock layer of loading device($1,151kN/m^2$) and lower($1,500kN/m^2$), was similar with the estimated value ($1,250kN/m^2$).

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.199-219
• /
• 2011

In this thesis, we designed a experimental learning-teaching plan of 'decimal fraction concept' at the 4-th grade level. We rest our plan on two basic premises. One is the fact that a essential concept of decimal fraction is 'polynomial of which indeterminate is 10', and another is the fact that the origin of decimal fraction is successive measurement activities which improving accuracy through decimal partition of measuring unit. The main features of our experimental learning-teaching plan is as follows. Firstly, students can experience a operation which generate decimal unit system through decimal partitioning of measuring unit. Secondly, the decimal fraction expansion will be initially introduced and the complete representation of decimal fraction according to positional notation will follow. Thirdly, such various interpretations of decimal fraction as 3.751m, 3m+7dm+5cm+1mm, $(3+\frac{7}{10}+\frac{5}{100}+\frac{1}{1000})m$ and $\frac{3751}{1000}m$ will be handled. Fourthly, decimal fraction will not be introduced with 'unit decimal fraction' such as 0.1, 0.01, 0.001, ${\cdots}$ but with 'natural number+decimal fraction' such as 2.345. Fifthly, we arranged a numeration activity ruled by random unit system previous to formal representation ruled by decimal positional notation. A experimental learning-teaching plan which presented in this thesis must be examined through teaching experiment. It is necessary to successive research for this task.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.333-342
• /
• 2021

In this study was conducted to measure the water content and dry unit weight of the ground using TDR (Time Domain Reflectometry) in order to supplement the problems of the conventional compaction management method. The Flat TDR system is a device that does not cause ground disturbance, and in order to verify the measured values, the dry density and water content were measured for samples of the ground subject at 7 sites other than Jumunjin Standard Temple. The water content section was divided into 6 sections of 3, 6, 9, 12, 15, and 18%, and the experimental results were confirmed according to the unified classification method. As a result of the indoor experiment, the water content showed an error of about 0.7% for the SP sample and about 1.3% for the SM sample. In addition, the dry unit weight confirmed an error of about 7% for the SP sample and about 5% for the SM sample. It was confirmed that stable values were derived in sandy or silty sandy ground except for clay or gravel. Through the experimental results, it was confirmed that the measured values of the flat TDR system derive similar values to the existing traditional compaction management method, and it was determined that the flat TDR equipment was suitable for construction sites that require quick constructability and economic feasibility.

• The Optical Journal
• /
• s.107
• /
• pp.18-24
• /
• 2007

광기술 발전의 핵심적인 역할을 수행하는 분야는 광 계측기로 우리나라의 경우 일반 계측기기는 선진국과 큰 차이를 보이지 않고 있으나, 광계측기기를 포함한 정밀계측기기 분야에서는 뒤처지고 있는 것이 사실이다. 현대 IT 산업기술의 특징은 부품 및 반도체 소자들은 계속 고집적.고밀도로 발전하고 있으며 하드 디스크나 필름 등 기록매체도 더욱 섬세한 단위로 내려가고 있고 각종 기계공학도 더욱 매끄러운 표면처리와 정밀성을 추구하고 있다. 이러한 나노테크놀로지를 선도하기 위해서는 광학분석, 레이저 측정, 이미지 프로세싱 등 나노미터 단위의 가공 또는 계측 등을 지원할 수 있는 기기의 지원이 필수적이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.402-405
• /
• 2012

In this paper, we proposed a novel metamaterial unit cell utilizing an interdigital capacitor(IDC) with non-bianisotropic property. Due to the induced magnetic resonance of an IDC unit cell, exotic effective constitutive parameters can be realized like a split ring resonator(SRR). Furthermore, the proposed unit cell is electrically smaller than a conventional SRR unit cell. The effective parameters retrieved from the transmission responses of waveguide measurement method and simulated results show good agreement.

• Annual Conference on Human and Language Technology
• /
• 1994.11a
• /
• pp.282-287
• /
• 1994

본 논문에서는 글자 단위를 기본으로 하는 한글 검색 기능을 구현할 때 적용될 수 있는 검색유형 (search pattern) 들은 어떠한 것들이 존재할 수 있는지에 대해 먼저 살펴보고, 검색 알고리즘에 적용시켜 본다. 이 때 부호계와의 연관성과 효율성을 따져보기 위해서 두 바이트 상용조합형, 두 바이트 KS C 5601 완성형, n-바이트 (3 바이트) 부호계, 그리고 국제 표준 한글 부호계의 첫-가-끝 부호계 등 여러가지 부호계를 사용할 때를 서로 비교해 본다. 각 부호계를 사용할 때 알고리즘이 조금씩 바뀌게된다. 그 변형을 살펴보면 그 효율을 측정할 수 있는데, 한글 글자단위 검색 등의 유형의 작업에서는 조합방식의 부호계를 사용하면 더욱 편리하다는 것을 알 수 있다. 이는 단순히 한글 글자단위 검색 기능에서 유리하다고 하기보다는 한글의 특성을 더 잘 반영하고 있다고 할 수 있는 것이다. 또한 조합방식의 부호체계 중에서도 별도의 연산값이 소리마디에서 글자를 분리해 낼 수 있는 부호계 (3-바이트 부호계, 첫-가-끝 부호계) 의 경우는 글자를 기본 단위로 처리하고자 하는 응용 분야에서 더욱 편리하게 사용될 수 있다.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.339-345
• /
• 2004

The term ton is widely used as the unit of the ship's size. Before people used the term ton as the unit of the ship's size, the various terms had been used for indicating the ship's size. For examples, the term ton was used in Western Europe, last in Northern Europe, cantara in Geneva, milliaria in Venice, and carra in Naple respectively. In Asia the rice had been the most important cargo for many centuries. So the term SEOK in Korean or SHI in Chinese was used as the unit of the ship's size. Especially the Chinese used the term LIAO in Chinese or RYO in Korean for indicating the ship's size. As above seen, the different terms had been used for showing the ship's size from places to places. But with the introduction of Moorsom's Tonnage Measurement in the middle of the 19th century and its spread to all over the world, the term ton was become the only unit of ship's size.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.111-120
• /
• 2009

Recently, pay adjustment regulation (PAR) has been developed to induce better performing road pavements around the country. This regulation was successfully applied during rehabilitation of highway flexible pavements for the first time, and their results are the focus of this paper. For highway pavements, a lot has been defined by typical amount of works a day. This lot was further divided into several sublots depending on field conditions. According to AASHTO Quality Assurance Guide Specification, pay factors for each lot were statistically determined with field measurements of five performance indicators. And composite pay factors were calculated by accounting for the impact of individual performance indicators on a long-term performance of pavement. In 2008, the PAR was tested with asphalt overlays conducted at all six local headquarters of Korea Expressway Corporation. Also, concerns raised during implementation are discussed in this paper. Limited data used in this study showed that if all performance indicators fall within the construction limits with less variances final construction costs may increase by 50%, whereas 10% reduction in construction costs could be necessary if key performance indicators such as density do not meet the construction quality requirements.