• International Area Studies Review
• /
• v.14 no.1
• /
• pp.299-319
• /
• 2010

This thesis analyzed that which countries won the Olympic medals more efficiently at the Olympic Games. Unlike the previous studies, I measured efficiency under the CRS, found implications for investment to improve sports skills through understanding the characteristics of sports race. A methods for research is a DEA-based approach which measures efficiency by using the data only, not assuming the parameters. The inputs are total population and GDP, the output is Olympic medals at 2004 Athens Olympic Games and 2006 Turin Winter Olympic Games. I applied different weights based on the medal colors. The results showed the tendencies that the larger the scales of total population and GDP were, the lower efficient values were. These tendencies imply that sports skills are related with the law of diminishing returns and international convergence. According to these phenomenons, surging investments for sports performance are hard to get proper justification. In the case of limited resources, investing uniformly in various sport entries is more productive than in just one or two sport entries.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.382-382
• /
• 2015

하천 및 그 주변을 포함한 지형에 대한 정밀 측량 자료의 구축은 장기적인 수자원 계획 및 정책을 수립하는데 중요한 요건이 된다. 최근 들어 무인 항공기의 사진측량시스템을 이용하여 수치 표고모형을 구축하는 연구가 진행 중에 있으며, 이를 기존 하도측량 자료와의 통합 과정을 통해 하천 및 주변지형 측정에 대한 자료 구축이 이루어지고 있다. 본 연구의 목적은 무인 항공기와 무인 하천유량측정용 원격조정보트를 이용하여 측정된 주변 지형 및 하천 지형 자료를 통합하고 이를 공인된 측정 자료와의 비교를 통해 본 연구 결과의 정확성과 이에 따른 측정방법의 효율성을 검토하고자 하였다. 이를 위해 낙동강 강정고령보 하류부 지역을 대상으로 하여 무인 항공기와 무인 하천유량측정용 원격조정보트를 이용하여 지형자료를 측정하였다. 이 측정 자료를 하나의 자료로 통합하여 수치표고모형을 구축하였고 이를 국토지리정보원의 1:5,000 수치지도를 이용하여 5m 간격으로 구축한 수치표고모형과 비교하여 그 정확도를 비교해보았다. 그 결과 측정완료시부터 표준화된 데이터 생성 완료시까지의 시간을 기준으로 기존 측량방법 보다 효율성이 높은 것으로 나타났고, 1:5,000 수치지도를 이용하여 구축한 수치표고모형 자료와 정확도를 비교해볼 때 실무에 적용 가능한 수준 내로 오차가 발생하는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.375-381
• /
• 2017

A full-scale field test was conducted to investigate the arching effect of an embankment pile. The arching effect calculated from the test results was compared with theoretical values. Measurements obtained from a load cell and an earth pressure cell during the field test reflected the arching effect of the embankment pile well. The arching effect measured by load cells for an embankment height of 3m or less was smaller than the theoretical value with the assumption of plain strain.The measured effect for a height of 4 m or more was larger than the theoretical value. In contrast to the consistent decrease of the theoretical arching effect, the arching effect obtained from the field test shows continually increasing trends. The arching effects calculated from the earth pressure cells were greater than those from the theory under the plain strain assumption, but the trend was similar to the theoretical one. The arching effects measured by the earth pressure cells an embankment heights of 2, 3, 4, 5, and 6 m were 1.05, 1.23, 1.29, 1.28, and 1.29 times greater than those from the theory under the assumption of plain strain. The arching effects from the field test were much greater than those from the theory under the installation of a pile grid.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.193-202
• /
• 2005

Due to the importance of SCM(Supply Chain management) in business logistics. many studies related to the SCM performance measurement have been conducted. However, previous SCM performance measurement models have not reflected both ways, operational efficiency and response for market shift. The aim of this research is to suggest a dynamic model to measure SCM performance both with operational efficiency and response for market shift, based on previous SCOR model. To achieve this aim, we developed a cognitive map-based model described eleven KPIs (Key Performance Indicators) with different weight values. And, to measure response level for market shift, we used the concept of entropy-elasticities. Finally, through some actual cases, merits that have no previous models were shown.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.777-786
• /
• 2000

Fire resistance and thermal stability of polypropylene composite systems were investigated by using several halogenated fire-retardants such as decabromodiphenyl oxide (DBDPO) and chlorinated paraffin wax (CPW). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863, ISO 4589) and characteristic properties of cone calorimetry(ASTM E1354, ISO 5660) heat release rates (HRR), time to ignition (TTI), total heat release (THR), effective heat of combustion (EHC), mass loss rates, etc. Comparing the cone calorimetry experimental results of the halogen flame retardants, DBDPO exhibited twice higher efficiency than CPW in polypropylene systems, and the LOI also showed similar trends to cone calorimetry. The thermo-oxidative stability of the composite systems was increased about 30-5$0^{\circ}C$ in thermogravimetry analysis.Collectively, the combustion, extinction and thermally-stable characteristics of flame retardants were identified in this study.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1163-1165
• /
• 2010

가솔린 기관의 체적 효율은 흡기 장치의 효율의 척도로 표현된다. 현재 체적효율은 4행정 가솔린 엔진의 흡기장치의 특성과 공연비 제어를 위한 중요한 파라미터로 사용되고 있다. 체적 효율은 이론적으로 실린더로 흡입 가능한 양에 대한 실제로 실린더로 흡인한 공기량의 비율이다. 체적효율은 엔진회전 속도와 흡기다기관 부압에 따라 결정되는 종속변수이다. 체적 효율은 정상상태와 과도상태와 같은 엔진의 모든 운전조건을 시험하는데 한계와 제약이 매우 크다. 이 논문에서는 선형 알고리즘을 사용하여 체적 효율의 파라미터를 규명하여 선형 다항식 모델을 개발한다. 그리고 실험으로 구한 체적효율 데이터와 다항식 모델을 비교하고 객관적인 타당성을 평가 하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.103-114
• /
• 2014

Data envelopment analysis (DEA) measures the relative efficiency of decision making units (DMUs) with multiple performance factors that are grouped into outputs and inputs. DEA has proven to be superior to simple aggregation of performance measures, and is also useful for evaluating the performance of construction companies for comparison with competitor performance. The purpose of this study was to survey literatures on the application of DEA methodology and to propose a methodological scheme to measure the performance of construction organizations. Articles on previous studies were surveyed and examined as part of a comprehensive review. The survey revealed that the application of DEA in the construction industry was li mited. Further, the survey indicated that there is a need for the development of a methodological framework on the special goals and subjects of performance measurement, methods of data structure and collection, selection of appropriate DEA models, analysis of results, and post-test. Based on the survey, this study identified and discussed the types of major issues and topics for future studies from a methodological perspective, which could be helpful to researchers interested in using DEA to study performance issues in construction organizations.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.419-423
• /
• 2007

Environmental low level tritium analysis was studied using liquid scintillation counter(LSC) and electrolytic enrichment method. To obtain low level blank count, various counting vials were investigated. Among them, teflon coated PE vial had a lower blank count rate (1.86 cpm) and we obtained 2.01 Bq/L detection and tritium separation factor was above 20. LSC counting efficiency obtained $28.70{\pm}0.27%$ using the NIST tritium standard water sample.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.351-361
• /
• 2023

The purpose of this paper is to help those who research and develop solar cells in university laboratories and industrial sites understand the most basic and important quantum efficiency measurement and analysis method in analyzing solar cell performance. Starting with the definition of quantum efficiency, we calculate the theoretical current density according to the band gap of the solar cell material from the solar spectrum, along with a detailed introduction to the measurement and analysis methods, and measure and analyze the theoretical current density and quantum efficiency. We discuss in depth how to analyze the performance of solar cells through Quantum efficiency measurement and analysis of solar cells is a very useful method that can give intuition to solar cell performance analysis as it can analyze solar cells according to depth (front emitter, bulk, rear surface). Students and researchers who study solar cells with a deep understanding of theoretical current density and quantum efficiency measurement analysis are expected to use it as a basis for analyzing solar cell performance.

• Journal of Korean Library and Information Science Society
• /
• v.31 no.4
• /
• pp.191-212
• /
• 2000

This study is intlded to ampre the effectiveness of the Northemlight and Google, which are based on Datamining kdmique with a Metacrawler, one of metasearch engines. As a result, searches responding to queries in the Northemlight and Google produced a higher precision and recall as comparrd with searches nspcdhg to queries in the metacrawler. The results show that the Datamining techniques can help improve information retrieval effectinveness.