• Title/Summary/Keyword: 측정표준기술

Search Result 932, Processing Time 0.032 seconds

Image Quality Evaluation according to the Application of Air Mattress on Computed Tomography Equipment Table (전산화단층촬영장비 테이블의 에어 매트리스 적용에 따른 화질평가)

  • Jeon, Sang-Won;Pak, Jae-Yun;Suh, Tae-Suk
    • Journal of the Korean Society of Radiology
    • /
    • v.14 no.6
    • /
    • pp.819-825
    • /
    • 2020
  • The purpose of this study was to evaluate the usefulness of the developed air mattress for reducing the deterioration of image quality due to the scattered radiation generated on the computed tomography equipment table. 5 cm and 10 cm thick air mattresses were developed and the image quality was measured by scanning the AAPM phantom according to thickness and thickness. Statistical significance was confirmed by One Way Analysis of Variance(ANOVA) Compared with the AAPM phantom scanned in the standard method, the image with the air mattress did not show any difference, but when the air mattress was not applied, the CT number and uniformity were low and the noise was high, and the spatial resolution Respectively. The developed air mattress has no harmful effect on the diagnostic image, it is very effective in improving the image quality and can increase the CT image quality by simply applying Air Mattress to existing equipment without using the technology applied to the latest and high-cost equipment.

A bio-sensor SoC Platform Using Carbon Nanotube Sensor Arrays (CNT 배열을 이용한 bio-sensor SoC 설계)

  • Chung, In-Young
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.12
    • /
    • pp.8-14
    • /
    • 2008
  • A fully CMOS-integrated carbon nanotube (CNT) sensor array is proposed. After the sensor chip is fabricated in commercial CMOS process, the CNTs network is formed on the top of the fabricated sensor chip through the room-temperature post-CMOS processes. When the resistance of the CNT is changed by the chemical reaction, the read-out circuit in the chip measures the charging time of the $R_{CNT}$-Capacitor. finally the information of measured frequency is converted to a digital code. The CMOS sensor chip was fabricated by standard 0.18um technology and the size of the $8{\times}8$ sensor array is $2mm{\times}2mn$. We have carried out an experiment detecting the biochemical material, glutamate, using this sensor chip. From the experiment the CMOS sensor chip shows the feasibility of sensor for the simultaneous detection of the various target materials.

Real-Time Full Accounting Management System in Multi-services Access Integrated Network : Design and Implementation (다중 서비스망 환경에서의 실시간 과금 관리 시스템설계 및 구현)

  • Chang, Beom-Hwan;Kim, Jong-Min;Go, Byung-Do;Chung, Tai-Myoung
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.6 no.2
    • /
    • pp.254-264
    • /
    • 2000
  • The billing techniques to support multiple services in an ATM based broadband access network have been rarely developed. In fact, the management techniques including accounting management have only focused on a single service environment such as PSTN thus far. In this paper, we present an accounting management system, called rtFAMS, designed and implemented to provide multiple Value Added Service Providers (VASPS) the charging records for the multiple services in a broadband access network. The architecture is based on OSI system management infrastructure and TMN Q3 interface to acquire accounting information from agents in the ATM cross-connecters as well as to process the billing mechanisms in the manager. This system Is designed to actively adopt the rapidly changing service environments and B-ISDN network management techniques. It also provides real-time accounting information to users using Web in addition to supplying the billing records to VASPs.

  • PDF

Posture features and emotion predictive models for affective postures recognition (감정 자세 인식을 위한 자세특징과 감정예측 모델)

  • Kim, Jin-Ok
    • Journal of Internet Computing and Services
    • /
    • v.12 no.6
    • /
    • pp.83-94
    • /
    • 2011
  • Main researching issue in affective computing is to give a machine the ability to recognize the emotion of a person and to react it properly. Efforts in that direction have mainly focused on facial and oral cues to get emotions. Postures have been recently considered as well. This paper aims to discriminate emotions posture by identifying and measuring the saliency of posture features that play a role in affective expression. To do so, affective postures from human subjects are first collected using a motion capture system, then emotional features in posture are described with spatial ones. Through standard statistical techniques, we verified that there is a statistically significant correlation between the emotion intended by the acting subjects, and the emotion perceived by the observers. Discriminant Analysis are used to build affective posture predictive models and to measure the saliency of the proposed set of posture features in discriminating between 6 basic emotional states. The evaluation of proposed features and models are performed using a correlation between actor-observer's postures set. Quantitative experimental results show that proposed set of features discriminates well between emotions, and also that built predictive models perform well.

A Design an Implementation of a Base Station Transceiver for WLL System (무선 가입자 접속망 기지국용 송수신기 설계 및 구현)

  • 정영준;강상기;이일규;김봉겸;홍헌진
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.6
    • /
    • pp.600-613
    • /
    • 1997
  • The implementation of a BTS(Base station Transceiver) for WLL system using W-CDMA(Wideband-Code Division Multiple Access) method is presented in this paper. It consists of three boards; receiver, transmitter and RF controller. Some RF parameters are considered and simulated by the RF simulation S/W using commercial and customized components specifications. The implemented transceiver of 5 MHz RF channel bandwidth satisfies the system requirements of a transceiver such as dynamic range, sensitivity in the receiver and spurious emission suppression in the transmitter. At the receiver, the experimental measurement showed 2.86 dB of NF and 60 dB above of dynamic range in AGC(Automatic Gain Control) locking. At the transmitter, the -49.46 dBc of spurious emission suppression is attained when the output power of the transmitter is 34.3 dBm. These results are good enough to meet to standard performance specifications.

  • PDF

Influence of Physicochemical Characteristic of Donghae-Samcheok Limestones on the Performance of Flue Gas Desulfurization (FGD) (동해-삼척지역 석회석의 물리화학적 특성이 탈황성능에 미치는 영향)

  • Seo, Jun-Hyung;Baek, Chul-Seoung;Kwon, Woo-Tech;Cho, Kye-Hong;Ahn, Ji-Whan
    • Resources Recycling
    • /
    • v.24 no.6
    • /
    • pp.38-44
    • /
    • 2015
  • It studies that effect of limestone of physicochemical characteristic on the performance of flue gas desulfurization (FGD) and application examination for technology of wet type FGD process and to utilize the limestone in Donghae-Samcheok. The experiment method was measured total neutralizing capability (TNC) using the lab scale experimental apparatus based on the HCl titration test. The results of TNC of limestone samples were more dependent on the physical characteristics including particle size rather than chemical compositions such as CaO content and particle size of limestone get smaller, TNC is increased.

The Implementation of Active Leakage Current Detecting Algorithm based on 16 bit Signal Processor (16비트 신호처리 프로세서 기반 유효성분 누설전류 감지 알고리즘 구현)

  • Han, Young-Oh
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.6
    • /
    • pp.605-610
    • /
    • 2016
  • The ELCB(: Earth Leakage Circuit Breaker) is the only way being used to prevent accidents from happening caused by electrical disaster. However, the existing ELCB has a limit to prevent damages to life and property due to a electric fire and a human body electric shock caused by the resistive leakage current, because of detecting the total leakage current in the block range of 15mA~30mA. It also has problems such as reduced productivity and reliability due to malfunctions by capacitive leakage currents. In this study, we have implemented the algorithm for the resistive leakage current detection technique and developed the resistive leakage current detection module based on a MSP430 processor, 16bit signal processor and this module can be operated in a desired block threshold within 0.03 seconds as specified in KS C 4613.

Design and Fabrication of a LTCC Diplexer for GSM/CDMA Applications (GSM/CDMA 대역용 LTCC Diplexer설계 및 제작)

  • Kim, Tae-Wan;Lee, Young-Chul
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.7
    • /
    • pp.1267-1271
    • /
    • 2009
  • In this paper, a diplexer circuit to separate GSM from CDMA band is designed using a LTCC (Low Temperature Cofired Ceramic) multi-layer technology. In order to increase a integration capability of the diplexer, it is designed using 3-dimensional (3-D) multi-layer compact inductor and capacitors in e-layer LTCC substrate with a relative dielectric constant of 7. In order to achieve high selectivity of the bands, a shunt capacitor and inductor are designed in the high-pass filter (HPF) and low-pass filter (LPF), respectively. The size of the fabricated diplexer including CPW pads is 3,450 ${\times}$4,000 ${\times}$694 ${\mu}m^3$An insertion loss (IL) and return loss in GSM band are less than -1.35dB and more than -5.66dB,respectively. In the case of CDMA band, the IL of -1.54dBandRLof above -9.30dBare archived.

Development of a Smart meter Applying the ANSI C12.22 International Communication Protocols (ANSI C12.22 국제 통신 프로토콜이 적용된 스마트미터 개발)

  • Lee, Sang-Il
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.12
    • /
    • pp.2952-2959
    • /
    • 2013
  • In this paper, a smart meter applying the international communication protocols has been developed. A smart meter requires communication protocols for two-way communication and control technology, registration and deregistration of electronic devices between electric power suppliers to exchange data. Standardization for communication protocols of a smart meter has been proceeding both in the US and Europe. The smart meter developed in this paper applied ANSI C12.22 as a communication protocol which is a north american standard. A smart meter should also provide the electric consuming information and electricity charge information to the customer in real time. Thus, the customer can behave the demand response based on this information. In this paper, the measured electricity from the smart meter is reported to the customer, and IHD(In Home Display) implemented with the windows software presents the reported real time data.

A SPECTROGRAPHICAL STUDY OF KOREAN VOWELS

  • LEE H.B.;Zhi M.J.
    • MALSORI
    • /
    • no.6
    • /
    • pp.4-12
    • /
    • 1983
  • 이 논문은 음향 분석기를 이용하여 한국어의 단순모음 8개를 음향 음성학적으로 분석하고 그 결과를, 이 현복의 1971년 논문 "현대 서울말의 모음 음가"에서 기분 모음을 기준으로 하여 기술한 단순 모음의 소리값과 비교하는 데어 목적이 있다. 특히, 한국어의 모음 1)길고 세게 날 때, 2)짧고 세게 날 때, 그리고 3) 여리게 날 때의 세가지 환경에 따라 변이음의 음가가 달리 나타난다는 이 현복의 이론을 음향 음성학적으로 확인해 보는 것이 연구를 하는 주요 관심사이다. 이 실험에 사용된 자료는 위에 말한 이 현복의 논문과 "한국어 음성학"(김선기, 1937, 1971; 영문)에 제시된 낱말로 이루어져 있으며, 이를 스웨덴에 유학중인 지 민제가 자신의 목소리로 직접 녹음하여 위메오 대한 음성학과의 음향 음성학 실험실에서 음향분석기로 분석한 다음, 각 모음의 제1 및 제2포인트를 측정하여 리를 토대로 음향도를 만들었다. 이 실험 결과는 다음과 같이 요약할 수 있다. : 1)그림 2,3과 포먼트 표에서 보인 바와 같이, 모음 /이, 에, 오, 으/는 각각 이 현복의 주장대로 환경에 따라 세 개의 분명히 다른 음가를 나타내고 있다. 2) 한편 모음 /애, 아, 우, 어/는 모음의 길이에 따라 다만 두 종류의 음가 변동이 나타날 뿐이며 강세의 유무에 따른 음가 차이는 드러나지 않았다. 3) 이 현복의 주장대로 모음 /에/와 /애/mss 음가의 차이가 크지 않으므로 음운 대립이 무디어질 수 있음을 이번 실험 결과로 확인 하였다. 특히 강세가 없는 /에/는 강세가 있는 /애/와 소리값이 거의 같았다. 4) 이 현복은 표준말에서 /어/의 음가가 세대에 따라 다르며, 안정된 세대의 말씨에서는 /어:/가 /어/에 비해 높고 중앙화한 소리값을 지닌다는 주장을 하였다. 그러나 이 실험 연구에서는 녹음한 이가 젊은 세대이어서 인지 그러한 현상이 나타나지 않았고, 다만 /어:/는 /어/보다 높이만이 높은 것으로 나타났다. 5) 이번 실험 연구에서 모음의 소리값이 장단과 강세에 따라 달라진다는 이 현복의 주장이 대체로 증명된 셈이나, 종합적이고 확고한 결론을 내리려면 좀 더 광범한 실험 연구가 필요하다고 본다. 특히 안정된 세대의 말씨를 직접 녹음하여 음향 음성학적으로 분석함이 필요하다.

  • PDF