• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1399-1402
• /
• 1997

Design methodology of Interactuve Measuring Part Program Generating Tools(IMPPGT) realized on the FANUC 15MA using touch trigger probes and interactive macro functions of the CNC was described in this paper. Measuring G codes have been designed according to probe ste up, basic and applied inspection items by using measuring arguments. Menu driven measuring and inspection functions of the IMPPGT were studied and implemented on the CNC through the macro executor and ROM writer. Using the developed measuring G code system on the machine tool, untended measurement and inspection operation was able to be realized in precision FMS lines.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1415-1418
• /
• 1997

An accurate length measuring system has been develope by a modified Michelson interferometer. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. Resolutioin of .lambda./40, 16 nm, was achieved from the discrete length measuring system. In order to obtain a resoltuion of 1.mu.m a decimalizing module was designed for the 0.016.mu.m resolution system. The refractive index of the ambient air was calibrated on the decimalizing module through the Edlen's formula. Performance of the system was evaluated on the machining center in short and long length measruements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1778-1781
• /
• 1997

The coke oven plant on a steel works has not, in the past, been regarded as a prime user of modern instrument technology. The reason for this perception may be due to the fact that the basic design of the coke battery has been changed little over the years. The recording and analysis of oven pushing force on a routine basis is seen as a means of monitoring plant operation. A torque sensor is set up at the shaft of the rotor for measuring pushing force. Pushing force data which is communicated form torque sensor to staor by telemetry method are shown on MMI(Man-Machine Interface) screen and stored in the database automatically. Perhaps the most important feature is that is allows a problem oven to be identified at an early stage and for corrective action to be taken before it develops into a refusal to push. In this way the mechanical loads imposed on the battery structlure can be held to a necessary minimum, so helping to prolong its service life.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1635-1638
• /
• 1997

A measurement of conduction veloctiy of the action potentials along the muscle fibres has been applied to various diagnosis. When we measure muscle fiber conduction velocity, it occurs that not only change of conduction velocity but alos inclusion of mipulse component by physiological and experimental reason. So, robuster time delay estimation algorithm than general methods[1] is needed to find correct time delay form these signals. In this paper we, propose new time delay estimation algorithms, robust in impulsive noise, by using characteristic of .alpha.-stable distribution whcih defines impulsive noise well. Then we apply proposed algorthms to measure muscle fiber conduction velocity and compare them with other studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1663-1666
• /
• 1997

The purpose of this paper is to find how to determine the controllability and stability derivatives form flight test and to display the stability of the Twinbee aircraft. There are various methods developed to find the derivatives : wind tunnel testing, predicted result from empirical data, flight test and so on. Among those methods, the estimation form flight test of real aricraft is the most reliable. We performed the flight test of Twinbee and recorded the states of aorcraft. Using those states and parameter setimation algorithem based on the Maximum Likdlihood(MMLE) criterion, we can estimate the controllability and stability derivatives. In this paper, wel will show the process form designing the proper flight test input to estimation of derivatives.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.518-523
• /
• 2005

Strip off-center is one of the major problems in hot strip mill line. The key to good centering is having good equipment, modern control systems, excellent maintenance and an understanding of milling process. Therefore, this study aims to develop a system that is useful for quantitative analysis of strip off-center. In this study, the measuring method of strip off-center was thoroughly studied and the exclusive control board to line scan camera were designed. Also, the manipulated type housing for line scan camera was developed to adjust initial parameters for strip width and center line. In order to check the accuracy and usefulness of the developed system, FM stand in $\#2$ Hot Strip Factory in Pohang Steel Works was targeted.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.5
• /
• pp.368-373
• /
• 2003

This paper presents a cost-effective 3D foot scanner system that provides the 3-dimensional point cloud foot data to design the custom footwear. To measure the 3-dimensional point cloud data of the foot, a CCD camera, a Non-Gaussian laser line projector and optical triangulation method are employed. Furthermore, the integrated system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and a computer. The measurement result is saved as 3D dxf format and it could be converted to 2D essential data fer a shoe design. The experimental results demonstrate that the proposed system have the decent resolution of 1mm which is enough for last and shoe design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.69-78
• /
• 1999

The attitude determination system is indispensable for navigation, guidance and control tasks. In order to construct this system some special products that use dual frequencies or have on receiver engine with multiple antennas are used. But they are so expensive. Thus there are still strong requirements for the conventional low cost single frequency off-the-shelf receiver. This paper will propose a new technique to resolve integer ambiguity with single frequency GPS receiver and will show the problems of the attitude applications in which low cost receiver are being used. Also, based on this new technique precise attitude determination is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.62-68
• /
• 1999

The attitude of a vehicle can be precisely determined using GPS carrier phase measurements from more than two antennas attached to a vehicle and an efficient integer ambiguity resolution technique. Many methods utilizing the known baseline length as a constraint of independent elements of integer ambiguities are proposed to resolve integer ambiguity at real time. Three-dimensional search space is reduced to two-dimensional search space with this constraint. Thus the true integer ambiguity can be easily determined with less computational burden and fewer number of measurements. But there are still strong requirements for the real time integer ambiguity resolution, which uses single epoch measurement of long baseline. In this paper, a new constraint from the geometry of multiple baselines is derived. With this new constraint, two-dimensional search space is further reduced to one-dimensional search space. It makes possible to determine integer ambiguity with single epoch measurement. The proposed method is applied to real data to show its effectiveness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.11
• /
• pp.891-898
• /
• 2003

Unmanned remote survey system is proposed to measure distance and angle of the present position of micro-tunneling machine from any starting point of entrance. Cross type linear LED that can be controlled remotely is attached to the tunneling machine. Range finder and angle measuring devise fixed to internal of the pipe can scan the center of LED. Distance and angle measuring devises are disposed in the measurable position of the pipe, then the present position of tunneling machine can be calculated automatically from the measurements.