• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.327-336
• /
• 2014

Submerged thin walls are extreme case of submerged rectangular blocks, and could be used for many purposes in rivers or coastal zones, e.g. to tsunami. To understand flow characteristics including flow and pressure fields around a specific submerged thin wall a numerical model was applied which includes computation of hydrodynamic pressure on ${\sigma}$-coordinate. ${\sigma}$-coordinate has strong merits for simulation of subcritical flow over mild-sloped beds. On the other hand ${\sigma}$-coordinate is quite poor to treat sharp structures on the bed. There have been a few trials to incorporate dynamic pressure in ${\sigma}$-coordinate by some researchers. One of the previous approaches includes process of sloving the Poisson equation. However, the above method includes many high-order terms, and requires long cpu for simulation. Another method SOLA was developed by Hirt et al. for computation of dynamic pressure, but it was valid for straight grid system only. Previous SOLA was modified for ${\sigma}$-coordinate for the present purpose and was adopted in a model system, CST3D. Computed flow field shows reasonable behaviour including vorticity is much stronger than the upstream and downstream of the structure. The model was verified to laboratory experiments at a 2DV flume. Time-average flow vectors were measured by using one-dimensional electro-magnetic velocimeter. Computed flow field agrees well with the measured flow field within 10 % error from the speed point of view at 5 profiles. It is thought that the modified SOLA scheme is useful for ${\sigma}$-coordinate system.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.33-42
• /
• 2013

This study which are recognized that the lack of empirical research about the efficiency of the elements of environmentally friendly housing development planned presented housing design elements and policies to revitalize for the reduction of greenhouse gas emissions by analyzing the effectiveness of reduction of greenhouse gas output. In addition, it used various models of DEA which are accepted until now effective technique to evaluate the performance of the organization. In conclusion, there are effective 5 regionals which are Seoul, Incheon, Ulsan, South Chungcheong Province, South Gyeongsang Province. other regionals was analyzed to be inefficient. The conclusion from this study are as follows: First, in case of 11 regionals which are analyzed to be inefficient, they have to difference plan elements to make up. So each region should establish strategy to complement vulnerability. Second, not only internal architectural factors but institutional, and external environmental factors also affect the reduction of greenhouse gas emissions. And weighted scores also were moderately high. But levels of weighted scores still less than the ratio of Good quality housing. So it can be determined that evaluation of individual architecture still considered important. It need to pay more attention to the operating system and the external environmental factors.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.249-261
• /
• 2014

This study aims to examine production technique of white wares from the Guyre-2ri 1st and 2nd kiln sites, Wonju, Gangwon Province and characteristics of the used materials, and to find a correlation among materials of the excavated white wares. X-ray fluorescence sequential spectroscopy(XRF), X-ray diffraction(XRD), Dilatometer and Inductively coupled plasma mass spectrometry(ICP-MS), Inductively coupled plasma automic emission spectrometer(ICP-AES) were applied to determine the chemical composition, crystalline phase of samples, firing temperatures, trace elements and rare earth elements. White wares from the Guyre-2ri kiln sites contained high contents of coloring oxides and fluxes. Though firing temperature of each sample was different, they were mostly fired at a temperature below $1200^{\circ}C$ and some of them experienced a low temperature of $1000^{\circ}C{\pm}20^{\circ}C$ and a high temperature above $1200^{\circ}C$. When analyzing body crystalline phases of the white wares using the XRD method, quartz and mullite were extracted from all the samples, and the proportions were similar to each other. When analyzing the excavated white wares using the Seger formula, also, all the samples showed similar clay sources and production techniques. Moreover, the white wares were made of host rocks of the same geological origin, according to the result of rare earth elements analysis.

• Cartoon and Animation Studies
• /
• s.26
• /
• pp.31-56
• /
• 2012

This is a scientific study of subjectivity on recognition types and preferences of animation audience. Therefore, Q-methodology was used as a methodology of this study. As a result, it was possible to find the various characteristics according to the preferences of audience on animation genres. The features of each type were classified into 3 types. First was an artistic and literary value-oriented type that explored storytelling and descriptive value. Second was a pictorial and aesthetic value-oriented type that explored visual beauty such as characters and Mise en scene. Third was a visual and entertainment value-oriented type that explored entertainment factors and attractions. Thus, according to the classification of preference types, it was inferred that digital image generation audience with an active preference that can create and consume images have developed a tendency that independently consumed their preferences based on thoroughly personal or subjective preferences rather than classified and accepted their preferred culture as their symbolic expressions of hierarchical position. In this aspect, Q-methodological consideration that is useful to analyze the subjectivity of audience could be a significant work. Nevertheless, this study alone could not reveal various generative contexts of specific preferences. It seems to have more significant results by applying various qualitative or quantitative methodologies together with this study and analyzing recognition types and preferences of audience.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.9-16
• /
• 1997

The contingent valuation method(CVM) has been used to evaluate the economic value of nonmarket goods such as forest recreation. There are two commonly used CVM questionnaire formats: open-ended and closed-ended. This study evaluates the net economic value associated with day use downhill skiing, using CVM. A random, on-site survey of skiers in Muju, Korea generated the value estimates. In this paper a nonparametric test is introduced to find whether the difference between value estimates from open-ended and closed-ended formats are significantly different because the distributions of WTPs are non-normally distributed. The results show that the net economic benefits of a skier in Muju varies from \15,131 to \25,332. The closed-ended values were 1.15 to 1.67 times as large as the open-ended values, depending on the model specifications. In nonparametric test the mean WTPs of the open-ended and close-ended applications are significantly different. Its reason may be that closed-ended can be more reducing the incentive for strategic behavior than open-ended question. However, we cannot conclude that the closed-ended method is superior to the open-ended method.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.25-33
• /
• 2001

Loop-loop electromagnetic (EM) survey in frequency domain has been carried out in order to provide basic solution to geotechnical applications. Source and receiver configuration may be horizontal co-planar (HCP) and/or vertical co-planar (VCP). Three quadrature components of mutual impedance ratio for each configuration are used to construct the subsurface image. For the purpose of obtaining the model response and validating the reasonable performance of the inversion, we obtained each responses of two-layered and three-layered earth models and two-dimensional (2-D) isolated anomalous body. The response of 2-D isolated anomalous body has been calculated using extended Born approximation for the solution of 2.5-D integral equation describing EM scattering problem. As a result of the least-squares inversion with variable Lagrangian multiplier, we could construct more resolvable image from HCP data than VCP data. Furthermore, joint inversion of HCP and VCP data made better stability and resolution of the inversion. Resistivity values, however, did not exactly match the true ones. Loop-loop EM field data was obtained with EM34-3XL system manufactured by Geonics Ltd. (Canada). Electrical resistivity survey was conducted on the same line for the comparison in advance. Since the constructed image from loop-loop EM data by 2-D inversion algorithm showed almost similar resistivity distribution to that from electrical resistivity one, we expect the developed 2.5-D loop-loop EM inversion program can be applied for the reconnaissance site survey.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.50-59
• /
• 2015

This study aimed at suggesting Willingness To Pay (WTP) for introduction of the Traffic Accident emergency Call (TAC) system by using Contingent Valuation Method (CVM) which is a general valuation method. As the method, this study suggested a WTP estimation method of the TAC system with the double-bound dichotomous choice model. In previous studies, the data are processed differently according to the type of questions and analysis models used for the calculation of willingness to pay. Therefore, we re-organized the model by the cases using the truncated data sets, and showed the difference in WTPs. The dataset was developed by more than 500 questionnaire obtained from online and offline survey with the consideration of composition ratio by age group referring housing census in 2010 to mitigate regional bias of samples. At last, this study applied various statistical methods, survival analysis, multiple regression, and Tobit model for better interpretation of the questionnaires.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.163-169
• /
• 2020

A smart key has been used in a variety of embedded environments and there also have been attacks from a remote place by amplifying signals at a location of a user. Existing studies on defence techniques suggest multiple sensors and hash functions to improve authentication speed; these, however, increase the electricity usage and the probability of type 1 error. For these reasons, I suggest an embedded security controller based on client authentication and user movement information improving the authentication method between a controller and a host device. I applied encryption algorithm to the suggested model for communication using an Arduino board, GPS, and Bluetooth and performed authentication through path analysis utilizing user movement information for the authentication. I found that the change in usability was nonsignificant when performing actions using the suggested model by evaluating the time to encode and decode. The embedded security controller in the model can be applied to the system of a remote controller for a two-wheeled vehicle or a mobile and stationary host device; in the process of studying, I found that encryption and decryption could take less then 100ms. The later study may deal with protocols to speed up the data communication including encryption and decryption and the path data management.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.47-52
• /
• 2006

This paper proposes a novel low-power $32bit\times32bit$ multiplier for deep submicron technologies beyond 130nm. As technology becomes small, static power due to leakage current significantly increases, and it becomes comparable to dynamic power. Recently, shutdown method based on MTCMOS is widely used to reduce both dynamic and static power. However, it suffers from severe power line noise when restoring whole large-size functional block. Therefore, the proposed multiplier mitigates this noise by shutting down and waking up sequentially along with pipeline stage. Fabricated chip measurement results in $0.35{\mu}m$ technology and gate-transition-level simulation results in 130nm and 90nm technologies show that it consumes $66{\mu}W,\;13{\mu}W,\;and\;6{\mu}W$ in idle mode, respectively, and it reduces power consumption to $0.04%\sim0.08%$ of active mode. As technology becomes small, power reduction efficiency degrades in the conventional clock gating scheme, but the proposed multiplier does not.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.58-66
• /
• 1990

A series of test was performed measuring the failure strength and failure mode of Gr/Pi, $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate containing a single pin loaded hole. The finite element method is applied to calculate the stress distribution in the laminates, then the failure load and the failure mode were predicted by means of the characteristic length. 12 different geometric variations were developed to analyze the effects of the ratio of specimen width to hole diameter (W/d) and ratio of edge distance to hole diameter (L/d). X-Ray of NDE methods were utilized in finding out the initial defects, damage and the fracture mechanism, and SEM(Scanning Electron Microscopes) was used the evaluation of the fracture mechanism and crack propagation around hole under tension pin loading. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate are found to be most sensitive to W/d but not so influenced by L/d. The failure mode and tensile strength predicted by the model show agreement with experiment data for pin loading bolted jointed test except range of $L/d{\leqq}3$.