• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2005

The purpose of this study was to establish the accuracy of the industrial photogrammetry system constructed with INCA2 metric camera and V-STARS system on steel box girder measurement under industrial measurement condition. The objective of the measurement was to determine the distances of plane to plane or plane to libs, precise positions of the bolt holes and angles of the plane to plane on the steel box girder using coded targets, tape targets, edge targets and target adapters. The measurement undertaken has shown that industrial photogrammetry method were a very accurate and more importantly were produced quickly to measure the steel box girder.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.11a
• /
• pp.47-80
• /
• 2006

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.205-210
• /
• 2005

As industries developed, industrial goods have got more precise. It led producers to feel like having a way to confirm whether the goods are good enough for the needs of consumers or not. Because of that, producers got interested in industrial photogrammetry that can get accurate data quickly with non-confect method. therefore, this study was examined by photographing an O-2A aircraft which was a large and precise one to check the application of Industrial photogrammetry. To measure the aircraft, the check points, that was attached to it was used as it was not possible to measure the aircraft by its design. The experiment was carried out in three parts considering arrangement of the check points and measured with Pro-spot to check any deformation of its external form. As a result, this study enables us to conferm a state of the aircraft alignment promptly and to provide accurate data for producers, which helps them to make a decision.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.57-63
• /
• 2005

According to increasing of demand for high accurate and quick measuring technology, they became to interest in industrial photogrammetry that can satisfy with this needs. This study is examined O-2A aircraft to check the application of Industrial Photogrammetry technology. To measure the aircraft alignment, the check points marked on it were used without exact aircraft design data. And to check any deformation of its external original feature, Pro-spot system has been used.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.169-175
• /
• 2022

Korea's construction industry has a shortage and aging of construction manpower, low productivity compared to other industries, and a high rate of industrial accidents. The Ministry of Land, Infrastructure and Transport is preparing for the 4th industrial revolution and is expanding investment in construction automation and innovative growth engines to improve productivity in the construction industry. In order for new technologies to be utilized in the road construction field, the accuracy of the technologies and the applicability of each type of work must be evaluated. In this study, the accuracy of the mobile mapping system was tried to verify based on the relevant work regulations, and to suggest the applicability of the mobile mapping system to high-speed driving tracks through data acquisition and analysis on road construction sites. The accuracy of the equipment used in the study was verified in accordance with the relevant work regulations, and the possibility of applying the mobile mapping system used for the study to road construction surveying was presented with a maximum error of less than 10cm in the horizontal and vertical directions. In addition, the possibility of utilizing the road construction survey using the mobile mapping system was presented through comparison with the existing method for data acquisition time for construction surveying, production of construction status survey results, and calculation of heatmap and earthworks. In the future, the use of construction status surveying of the mobile mapping system will greatly improve the efficiency of construction work.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.209-215
• /
• 2004

Together with the requirements of tunnels, its construction methods and technologies have been pretty much developed, but frequent accidents happened under the constructions are just one of important problems which should be improved. To detect the potential hazardous factors in or ahead of time, speedy and accurate observation are absolutely required, but currently surveying method using tapes, level and total station, has been generally taken in measuring of tunnel convergence and crown. The purpose of this study is, as using of industrial photogrammetry system which is supplying more accuracy and speedy in the measure of tunnel convergence and crown. From the result of this study, we have got up to 1/20,000 accuracy and totally 6 minutes, from picturing 5 sections by one person to data edition, has been taken except setting targets.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.69-78
• /
• 2013

Recently, as GIS industry has substantially grown up, convergence between industries such as the application coverage of surveying and cadastral information is gradually on the increase. The new approach of convergence between topographic surveying and cadastral survey is indispensable to make the change of geospatial environment ready and to maximize the utilization of National Spatial Data Infrastructure(NSDI). The purpose of this paper is to seek the way of synergistic improvement in topographic surveying and cadastral survey in comprehensive aspects of national geospatial information. First, we reviewed policy environment to clearly establish aim of convergence and promising perspective of GIS industry policy, considering NSDI. In addition, we examined current state of administration (organization, human resource, service) and institution situation. We came up with interior ability and external policy environment as well as critical success factor for the synergistic convergence by using SWOT analysis. Lastly, we developed basic perspective of convergence and improvement model and concrete scheme for stakeholder to complementary make progress. We can come to conclusion that the convergence of topographic surveying and cadastral survey should be not only carried in macro outline of successful NSDI but also committed to completion and maintenance of GIS framework.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.283-290
• /
• 2001

This paper demonstrates the performance of industrial precise measurement using the digital close-range photograrmmetric system based on a off-the-shelf CCTV-type CCD camera. The system was constructed with a CCD camera and a PC with a frame grabber, coupled with digital image mensuration and self-calibrating bundle adjustment techniques. An artificial fish reef with cubic shape was taken as an object for the application test of the system and the digital images were acquired on multi-station convergent network around the object. The geometric calibration of the CCD camera and the phototriangulation of the entire surface of the object was carried out simultaneously by means of self-calibrating bundle adjustment technique. Also the system comprising a high resolution still-video camera Kodak DCS, which high accuracy potential has been already established, were employed in similar network condition. Then the results from two different camera systems were compared in the accuracies of phototriangulation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.11a
• /
• pp.91-116
• /
• 2006

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.17-25
• /
• 1996

The development of still video CCD cameras has simplified dramatically the digital imaging process. Still video cameras have flexibility that allows digital image acquisition and on-board image storage without being connected to a computer. The objective of this paper is to evaluate the performance of digital close-range photogrammetric system using the still video camera for dimensional inspection and structural monitoring being required in various industries. Some sub-pixel measurement techniques, which is indispensable for digital image measurement, were suggested. The author carried out the self-calibration of a high resolution DCS420 still video camera and then test application of a structure. The self-calibrating bundle adjustments resulted in object space accuracies which exceed 1 :46,000. It is ascertained that this digital close-range photogrammetric system has high accuracy potential and task effectiveness for industrial applications.