• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.951-959
• /
• 2011

The low power consumption modulation is required for short range communication. In this paper, we analyze performance of low power consumption modulation scheme such as PSPM, PSSK and QAPM using OFDM transmission in AWGN channel. A PSPM, PSSK and QAPM modulation scheme are decrease in bandwidth efficiency but improved power efficiency than existing PSK and QAM. These modulation schemes can achieve power efficiency because every symbol of modulations has a zero-envelope period like PPM techniques. The OFDM system is high bandwidth efficiency than single carrier system. In this paper, we are propose the frequency domain mapping method for OFDM transmission using low power consumption modulation method. Also, we compare low power OFDM communication system regard to BER performance, throughput and PAPR.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.698_699
• /
• 2009

본 논문은 정적 편심과 회전자 도체 봉 파손에 대해서 각각 특성 해석을 한 후, 두 고장이 복합된 상태를 특성 해석하였다. 해석 대상 전동기는 coupled magnetic circuits 방법으로 모델링 하고, 시뮬레이션하였다. 특성 해석에 필요한 중요 파라미터인 인덕턴스는 winding function 이론으로 계산하였다. 시뮬레이션 결과 중에서 고정자 전류를 전류 신호 분석 기술로 특성 해석을 하였다. 특성 해석 결과에서 고장 상태가 변하면 특정 주파수의 크기가 변하는 것을 알 수 있었다. 복합 고장에서는 정적 편심은 아래쪽 측 대역 성분의 크기를 증가시키고, 회전자 도체 봉 파손은 기본 특이 주파수 주변에 기생 성분을 만드는 것을 알 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.755-758
• /
• 2003

본 논문에서 단거리전용통신(DSRC)용 OBE에 사용되는 5.8GHz 송신측 ASK와 PA를 one-chip화하여 MMIC로 설계를 및 제작하였다. 설계된 ASK-PA는 3V 단일 공급전원을 사용하였고, 능동 소자로서 GaAs MESFET을 사용하였다. ASK는 회로의 복잡도를 줄이기 위해 직접변조 방식을 채택하였고, 인접채널 간섭의 영향을 줄이기 위하여 드레인 제어 변조회로를 사용하였다. 또한 전력증폭기는 2단으로 하여 AB급으로 동작하도록 전압분배 바이어스회로로 구성하였다. 측정결과 3V의 공급전압에서 전체이득 20.63dB, 송신출력 7.8dBm으로 나타냈다. 공정은 ETRI 0.5㎛ GaAs MESFET 공정을 사용하였고, Chip size는 1.2mm×l.4mm이다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.221-228
• /
• 2000

본 논문에서는 전기·전자 장비의 활용이 확대되면서 더욱 더 관심이 고조되고 있는 전자파장해에 대하여 논하고자 한다. 기존 PWM 직류전원장치에서는 회로 소자 및 배치에 따른 기생소자와 갑작스런 전압/전류의 변화에 의해 전자파장해를 발생시킨다. 본 논문에서는 PWM 직류전원장치에서 발생하는 전자파장해의 특성을 고찰하고, 출력전압 조절에 큰 영향을 주지 않는 범위내에서 PWM 제어가 가능하면서 두 개의 고정된 스위칭주파수로 연속적으로 변조하는 Bi-FM 변조제어방식과 랜덤하게 변화하는 스위칭주파수 변조제어방식을 이용하여 전도잡음을 저감시킬 수 있는 변조방식을 논할 것이다. 또한 이들 변조 방식의 주파수 스펙트럼 특성을 비교·분석하여 설명하고, 제어기를 분석·설계하여 실험을 통하여 스위칭주파수와 그 고조파 주파수들의 측대역으로 전도잡음이 분산되고 전도잡음의 피크치가 감소됨을 확인하고자 한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.396-401
• /
• 2002

저 대역 부호화된 비트스트림을 네트워크를 통해 전송중 에러가 발생하면 수신측의 복원 화질에 심각한 화질 열화가 발생한다. 따라서, 이러한 에러에 대처하기 위한 복호기에서의 에러 은닉 기법은 화질에 매우 큰 영향을 끼칠 수 있다. 본 논문에서는 SNR(Signal to Noise Ratio) 계층 부호화에 의해 생성된 고급계층의 비트스트림을 통신 채널로 전송시 복호기에서의 오류 은닉 기법을 위해, SNR 계층 부호화 방법에 사용되는 부호화 모드 및 복호기에서 이용가능한 예측 모드에 대해 알아보고, 단일 계층 부호화된 비트스트림의 에러 은닉 기법과의 차이점을 비교, 분석한다. 따라서, 본 연구에서는 저대역폭 비디오 전송을 위해 계층 부호화 모드중 SNR 계층부호화로 부호화된 비트스트림을 에러 발생 가능 채널로 전송시 에러 은닉을 위한 효과적인 방향을 제시한다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.314-320
• /
• 1997

We have observed the orientation behavior of acicular iron oxides in magnetic layer of the particular magnetic tape after magnetic paint was coated on polyester film. As results of the static orientation, orientation of iron oxides come to the maximum at the front and the back of orientation magnets, but it was a litter lower at the back than at the front, and it slowly decreases and come to the constant level after passing through the orientation magnets. In case of edge portion to be futher away from center in the coated film, the orientation of iron oxides in magnetic layer come to worse than that of the center. We think it is owing to the shape and the magnetic magnitude of orientation magnets. The results of the dynamic orientation are as follows. As the orientation of iron oxides in the particulated magnetic tape is higher, the output properties of tape come to better than ever. And the orientation of iron oxides can be changed by drying condition, as result, the output properties of tape can be also. Therefore we think the considrations of the design of orientation magnets and the control of drying condition are needed to improve output properties of the particulated magnetic tape.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.565-572
• /
• 2001

At the most recent years, laser medical instruments, laser applications and laser nuclear fusion need strong visible light and ultraviolet rays. Nonlinear optical devices, such as harmonic generators and parametric oscillators, provide a means of extending the frequency range of available laser sources. Frequency conversion is a useful technique for extending the utility of high-power lasers. It utilizes the nonlinear optical response of an optical medium in intense radiation fields to generate new frequencies. These progresses have been used to generate high-power radiation in all spectral regions, from the ultraviolet to the far infrared. Optical parametric oscillators and amplifiers generate two waves of lower frequency They are capable of generating a range of wavelengths from a single frequency source, in some cases spanning the entire visible and near infrared regions. Consequently, in order to obtain the green light, the pulsed Nd:YAG laser using multiple-mesh PFN(Pulsed Forming Network) method with Nonlinear optical device was adopted. We compared the current pulseshapes with the laser output energy, and conversion efficiency.

• Korean Journal of Optics and Photonics
• /
• v.33 no.2
• /
• pp.59-66
• /
• 2022

A free-form Mueller matrix ellipsometer (MME) based on independent control of the azimuthal angle of each polarizing element is introduced. The azimuthal angles of the polarizer and the matching compensator which generate the optimum Stokes vectors of an incident beam are investigated for the polarization state generator, where the spectral responses of the retardation angle and transmittance ratio of a nonideal compensator are taken into account. Similarly, the azimuthal angles of the analyzer and the corresponding compensator are investigated for the polarization-state detector, to unambiguously determine the Stokes vector of the outcoming beam from the sample, and explicit expressions for the Stokes elements are derived. Since the suggested technique enables one to utilize a nonideal quarter-wave plate as the compensator for an MME, it will contribute to the construction and application of a Mueller matrix spectroscopic ellipsometer (MMSE) operating over a wide spectral range from deep ultra-violet to near infrared.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.259-268
• /
• 2014

In this paper, we suggest a method of extracting circuit parameters of the insulating transformer using S-parameter measurement, especially in high frequency range. At 60 Hz, conventionally, no load test and short circuit test are used to extract the circuit parameters. In this paper S-parameters measured from VNA(Vector Network Analyzer) were used to extract the transformer parameters using data fitting method (optimization). The S-parameters from the equivalent circuit using the extracted parameters showed good agreement with those from measurement. Furthermore, the transformer secondary voltages from the equivalent circuit model also coincide quite exactly to the measured secondary voltages in sinusoidal forms. Finally we assert that the proposed method to extract the parameters for the insulating transformer using S-parameter is valid especially in high frequency.