• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.709-716
• /
• 2016

In this paper, A duplexer module with temperature-insensitive electrical characteristics was proposed for remote wireless communication system. Duplexer modules are required to have performances of low insertion loss, high isolation between transmitted band and received band, harmonic suppression as well as high power durability in the system for transmitting guided information to missile flying a free space on the ground. The proposed duplexer module are consist of transmission bandpass filter and receiving bandpass filter which are connected to common antenna port, planar coupler for output power monitoring and low pass filter for harmonic attenuation of power amplifier and coaxial cavity resonator. The material and dimensions of the resonator are determined for minimum frequency shift by temperature variation using 3D EM simulation. The measured results of the prototype showed a good agreement with the simulation results, and it should be well applied not only for guided weapon systems but also for any other communication systems such as remote radio head.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.145-150
• /
• 2016

The capability of accurate positioning and tracking is necessary to implement an unmanned autonomous driving system. The moving-baseline GPS Technique is a promising candidate to mitigate positioning errors of conventional GPS system. It provides accurate positioning data based on the phase difference between received signals from multiple GPS antennas mounted on the same platform. In this paper, we propose a dual-band dual-circularly-polarized antenna suitable for the moving-baseline GPS. The proposed antenna operates at GPS L1 and L2 bands, and fed by the side of the antenna instead of the bottom. The antenna is firstly designed by calculating theoretical values of key parameters, and then optimized by means of 3D full-wave simulation software. Simulation and measurement results show that the optimized antenna offers 6.1% and 3.7% bandwidth at L1 and L2, respectively, with axial ratio bandwidth of more than 1%. The size of the antenna is $73mm{\times}73mm{\times}6.4mm$, which is small and low-profile.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.38-47
• /
• 2008

In this paper, the narrow band-pass filter with compact-size using the ${\lambda}g/2$ open stubs is proposed. The filter size is reduced by realization of transmission line at second harmonics and at the same time the power can be transferred to the output by using the fundamental wave generated in the resonator and the transmission line in which the impedance mismatch technique is adopted. Thus, the proposed filter can be reduced to half-length of horizontal transmission line than the conventional one. The experimental results show that insertion loss is 1.58 dB and return loss is 9.86 dB, and the fractional bandwidth is 10 % at the center frequency of 5.8 GHz. The filter size is $10.34{\times}18.56\;mm2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.305-313
• /
• 2013

As an FMT (Filtered Multi-Tone) transmission method of Wideband VHF communication system specified by the ETS (European Telecommunications Standards) EN 300 392-2, this paper introduces three existing realization methods, i.e., the direct filtering method using different band SRRC (Square-Root Raised Cosine) filters for each subcarrier, the PPN-DFT method using the IDFT-PPN (Poly-Phase Network) and PPN-DFT at the transmitter and receiver, respectively, and the Extended DFT method. Then, it proposes the extended IDFT-SDFT (Sliding Discrete Fourier Transform) that computes the DFT values only for interested subcarriers every sample time, and shows that it has an advantage of blind symbol timing (using no training symbol) individually for each user signal (independently of other users' signals) in the multi-user environment where the subcarriers are assigned in contiguous or interleaved blocks to each user and each user signal possibly experiences different channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.169-174
• /
• 2018

In this paper, a design method for a wideband LPF for harmonic suppression applications is investigated. The proposed wideband LPF is comprised of four circular slot pairs with different diameters, which are added symmetrically in the ground plane of a CPW transmission line. Four circular slot pairs act as a defected ground structure and provide a wideband low pass characteristic. The circular slot with the smallest diameter is located at the side of port 1, and the diameter of the circular slot is increased as it goes toward port 2. The low pass characteristics of each circular slot are compared with the proposed wideband LPF. The final designed LPF was fabricated on FR4 substrate, and its characteristics were tested. The measured S11 characteristic was maintained at over -3.3 dB in the frequency range of 1.89-20.00 GHz band, whereas the S21 characteristic was less than -21.4 dB in the frequency range of 2.66-20.00 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8C
• /
• pp.803-811
• /
• 2002

Asynchronous Transfer Mode-Passive Optical Network(ATM-PON) Technology is one of the best solutions for implementation of broadband access network. In this paper, we propose a new Dynamic Bandwidth Allocation (DBA) algorithm for ATM-PON systems. The DBA is a key technique for data traffic management. DBA has been studied widely to allow ATM-PON to transport data traffic cost-effectively and efficiently, and currently a hot standardization issue in Full Service Access Network(FSAN) and ITU-T. The proposed DBA algorithm efficiently manages the user traffics according to their service categories. Performance of the proposed algorithm, in aspect of Cell Transfer Delay(CTD) and Cell Delay Variation(CDV), is evaluated using computer simulation.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.174-184
• /
• 1999

In this paper, the equations which can be used to calculate the minimum series stabilizing resistance and /or the minimum parallel stabilizing conductance using the S parameters of an active device has been derived. The equation derived can be used to design a stabilizing circuit of minimum loss of a maximum available gain of a device when the circuit is adopted. For the case of KGF1254B which can be used at 1.9 GHz, the circuit proposed in this paper reduce the maximum available gain by 1 dB, while conventional simple resistor circuit reduce it by 5.2 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.777-783
• /
• 2009

In this paper, we implemented a wireless power transmission system at 2.45 GHz. The transmission power is limited within 20 dBm according to the ISM frequency regulations. We used two zero-bias Schottky diode and optimized the RF-DC converter for working a clock at 80 cm distance using a receiver with a single antenna and an Rf-DC converter to reduce parts and cost compared to previously reported literatures.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.109-116
• /
• 1995

프로세서 제어기기에서 오동작의 주요원인은 EFT로 국제전기기술위원회 (IEC)는 EFT에 대한 내성을 평가하기 위해 의사적인 신호를 규정하고 프로세서 제어기기의 내성을 시험하도록 권고하고 있다 본 논문에서는 IEC에서 규정한 의사 EFT신호를 Frequency domain에서 분석하고 이에 대한 대책용 부품개발에 대한 연구를 수행하였다 대책용 부품의 구성은 전원코드의 입력측에 관통형 컨덴서를 Cy 형태로 취부하고 전선자체에는 CM성분의 임피던스를 높이기 위해 고투자율 재료를 전선의 2차피복에 혼합하거나 감는 구조로 되어있다 그리고 전선자체에 CM성분의 임피던스를 높이는 고토자율 재료 대신에 Permalloy를 취부하여 비교하였다 측정 결과 개발된 전원코드는 EFT신호에 대해 넓은 주파수 대역에 걸쳐 매우 우수한 감쇠특성을 가지는 것이 확인되었다 특히 컴퓨터를 피즉정물로 하여 즉청한 dynamic 특성은 3.6Kv까지 견디는 우수한 특성을 나타내었다. 고안된 전원 케이블의 응용범위는 산업용 설비외에도 군용기기 의료기기등의 정상적인 동작확보에 사용될 수 있을 것이다 뿐만 아니라 사용방버에 따라 전원성을 통해 방사되는 EMI중 대책이 어려운 60MH이상 수GHz 대역의 발생전자파 대책에 좋은 특성을 가질 것으로 판단되면며 부품의 선택방법에 따라 EFT의에 IEC801-2,3,5,6, 모든 내성시험 항목에 효과가 기대된다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.83-89
• /
• 2002

A new scheme for image compression based on texture expression in the wavelet transform domain is presented. After taking wavelet transform, using the fact that the high-pass filtered bands has a lower variance than that of the original, a texture expression for the homogeneous polygonal regions can be more efficiently performed in the wavelet transform domain. The estimated texture parameters are transmitted to the receiver and later used for reconstruction after storing in disk. In most cases, the proposed method has yields good results with respects to the compression ratio and reconstructed image quality when our system has compared to conventional SPIHT scheme.