A Study on the Technique to Stabilize a Device with Minimum Degradation of Performances

특성 저하를 최소화하는 광대역 안정화 기법에 관한 연구

  • Chung, Myung-Rea (Faculty of Marine Electronic & Communication Eng., Mokpo National Marine Univ.) ;
  • Lee, Sang-Won (Dept. of Avionics Eng., Hankuk Aviation Univ.) ;
  • Kim, Hak-Sun (Faculty of Inform. Comm. & Computer Eng., Taejon National University of Technology) ;
  • Hong, Shin-Nam (Dept. of Avionics Eng., Hankuk Aviation Univ.) ;
  • Lee, Yun-Hyun (Dept. of Telecom & Inform. Eng., Hankuk Aviation Univ.)
  • 정명래 (목포해양대학교 해양전자통신공학부) ;
  • 이상원 (한국항공대학교 항공전자공학과) ;
  • 김학선 (대전산업대학교 정보통신.컴퓨터공학부) ;
  • 홍신남 (한국항공대학교 항공전자공학과) ;
  • 이윤현 (한국항공대학교 항공통신정보공학과)
  • Received : 1999.10.26
  • Published : 1999.12.31

Abstract

In this paper, the equations which can be used to calculate the minimum series stabilizing resistance and /or the minimum parallel stabilizing conductance using the S parameters of an active device has been derived. The equation derived can be used to design a stabilizing circuit of minimum loss of a maximum available gain of a device when the circuit is adopted. For the case of KGF1254B which can be used at 1.9 GHz, the circuit proposed in this paper reduce the maximum available gain by 1 dB, while conventional simple resistor circuit reduce it by 5.2 dB.

본 연구는 소자의 S-파라미터로 부터 소스측과 부하측에 최소 직렬 안정화 저항 값 및 최소 병렬 안정화 컨덕턴스를 계산하는 수식을 유도하여, 안정도를 유지하면서 최대 가용 이득의 손실을 최소화하기 위한 설계 방법을 제시하였다. 1.9 GHz 대역에서 사용되는 KGF1254B 트랜지스터에 일반적으로 사용되고 있는 단순한 안정화 회로를 적용하였을 때는 최대 가용 이득이 5.2 dB 감소되나 본 논문의 방법을 적용함으로써 1 dB 감소만으로도 회로를 안정화시킬 수 있었다.

Keywords