• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.867-875
• /
• 2005

In this paper, we fabricated along distance wireless communication transmitter and receiver over the 100 which used NRD technology. To make the transmitter and receiver of 400Hz band using the non radiative dielectric wave guide, transmitter was composed of gm oscillator, m modulator and antenna, receiver was composed of local gum oscillator, balanced mixer, 3dB direction coupler and antenna. Also we executed a wireless communication image transmission examination to the transmitter and receiver. We receive the image information in real-time data transmission from receiver after we send the image signal in the wireless distance of the 10km. Therefore, the 400Hz band U transmitter and receiver to be developed will be used widely for the transmission system CATV or broadband transmission system. This will be utilized also to the link device of a long distance high speed wireless communication network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2042-2051
• /
• 1998

VBR compressed, pre-recorded video is known to exhibit significant, multiple time-scale bit rate variability. To reduce the variability and burstiness of the aggregated transmission rate as low as possible, in this paper, we present an adaptive bandwidth smoothing algorithm, that can be effectively applicalble for VoD services over a shared-medium channel. For these environments where many clients are connected to a single server, by introducing the conventional MVBA(minimum variability bandwidth allocation) algorithm and controlling adaptively the conventional MVBA(minimum variability bandwidth asllocation) algorithm and controlling adaptively the aggregated transmission rate whenever a new clients request is arrived at the server side, the proposed algorithm effectively reduces the burstiness and variability of the aggregated transmission rate. Through computer experiments, it is shown that the proposed method perporms better than the convertional non-aggregated bandwidth smoothing schemes in terms of the peak rate, standard deviation, number of rate changes for the aggregated traffic.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.17-20
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated data bits with stored data bits in a PC connected with demodulator. The RF module In the experiments works only in the bandwidth of 424MHz-429MHz. The signal level degrades as the distance between transmitter and receiver increases. We measured the signal level and bit error and present the measured results with various locations in the building. And it is concluded that the measured data may be used in the design of short distance network in a building.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.70-75
• /
• 2022

The critical bandwidth represents response interactions with respect to a signal tone and their neighboring bands. This study was to analyze the critical bandwidths of a clinically important 500 Hz tone in Korean young male and female subjects (male = 10, female = 10) at a conversational level (60 dB HL). Data were measured with notched band noise and two alternative forced choice methods. Results showed that the critical bandwidth was slightly greater (95 Hz) than the previous Western measures. There were no statistically significant differences in gender, nor were there any significant differences in lateralization of the ear (p > 0.05). These results may have implications in optimizing effective tinnitus masking or the related clinical applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.483-486
• /
• 2014

A Visual Light Communication(VLC) system is a concept of converging illumination with communication. Design of the VLC system aims mainly at minimizing flicker for the illumination and maximizing transmission distance for the communication. This paper proposes an effective detection scheme of the transmitted signal by attenuating noises which may be included in the signal, and then presents implementation results. Inserting designated low and high pass filters in first and second implementations, the receiver became to improve the perception rate of transmitted signals. This verified a relatively higher possibility of receiving data in a dim light, so that the communication distance can be expanded in the visual light communication system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1347-1354
• /
• 1994

This paper deals with the experimental research, including measurement and analysis and field survey, on the causes of occurring noise defective gear boxes in hoist production plant in order to reduce the fraction of their occurrence. In this reserch following investigations are performed : measurement and gear-boxes, examination of each machining process of production, measurement and analysis of dimensional accuracy of each part, comparative vibration test with exchanging inaccurate parts. From these investigations, it is found that the machining accuracy of pinion gear tooth thickness is the most sensitive factor of noise problem. By maintaining the tooth thickness error within 0.05 mm tolerance in the gear cutting process, the fraction of noise defective gear-boxes are greatly reduced to less than 2%, where the usual rate of it has been 20-50%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10A
• /
• pp.1662-1670
• /
• 2001

인터넷 서비스 품질의 향상을 위해 고성능 서버의 증설 및 트래픽 분산 등 서비스 대역의 확장으로 인터넷 접속 장치인 서버 및 가입자망의 접속 속도는 급속히 향상되었으나, 인터넷의 접속 품질과 속도에 대한 만족도는 기대에 못 미치고 있다. 이러한 문제는 인터넷 접속장치의 증설로는 증가하는 트래픽을 수용하는 데에는 한계가 있고, 사용자측 노드에서 CP(Content Provider) 서버를 이르는 미들마일(Middel-mile) 구간이 개선되지 못하는데 원인이 있다. 본 논문에서는 지역적으로 분산된 멀티 사이트 인터넷 환경에서 각 클라이언트의 위치에 따라 클러스터링된 서버들의 로드 밸런싱을 유지하면서 서버와 사용자 측 노드를 최소화하여 사용자에게 효율적인 서버를 선택하는 방법을 제안하였다. 제안된 방법에는 효율적인 서버를 선택하기 위해 네트워크 상태 감시자(NSP)와 컨텐츠 서버 관리자를 두어 각 서버의 상태와 각 분산된 네트워크의 상태를 파악할 수 있도록 하였으며, 서버 선택 알고리즘과 알고리즘을 실현하기 위한 서비스 구조를 제시하였다. 또한, 효율적인 서비스 서버를 선택하기 위한 인자들과 측정방법을 나타내었으며, 제안된 서비스 구조에서 실험을 통하여 타당성을 확인하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.175-181
• /
• 1999

There are issues regarding how some of traffic parameters should be set so that ATM and non-ATM service parameters can be compatible. For example, policing method used by frame relay based on CIR(committed information rate) will not exactly match the ATM UPC(Usage Parameter Control) method. ATM and the frame relay have different transfer modes and traffic parameters. The cells and frames are police by their own traffic control schemes. For the same information, the real traffic of the ATM side takes greater bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. IN both networks this bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. In both networks this bandwidth ratio should be considered on traffic parameter mapping to maintain their QoS and to perform efficient network resource management. In this paper we describe traffic parameter mapping schemes between frame relay and ATM in ATM network and how to expect the bandwidth ratio to maintain FR QoS in ATM network. We assumed frame length distribution to Erlang or Exponential probability density function.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.903-906
• /
• 2001

점진적 전송 방식은 낮은 해상도의 영상에서부터 점진적으로 더 높은 해상도의 영상으로 전송이 진행되는 동안 수신측에서 전송된 저해상도의 영상으로 영상의 가치를 판단하여 나머지 부분의 전송을 진행하거나 취소 할 수 있어 제한된 전송 대역을 효과적으로 이용할 수 있다. 본 논문에서는 영상의 점진적 전송을 실현하기 위하여 영상을 비트플랜으로 분리한 후 각 플랜에 대하여 상보 쿼드트리 구조로 재구성한 후 적절한 순서에 따라 데이터를 전송하여 전송 초기단계에 영상의 내용을 대체적으로 파악할 수 있도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.417-426
• /
• 2000

In this paper, CE-CPSK(Constant Envelope Continuous Phase Shift Keying) modulated DS/SS(Direct Sequence Spread Spectrum) transceiver with 908 MHz carrier frequency and 1.5 MHz PN clock rate is proposed. To overcome the effect of nun-linear power amplifier, CE-CPSK modulation method which has the constant envelope and continuous phase characteristics is proposed. To analyze the DS/SS receiver performance with respect to code tracking loop, multipath fading channel is characterized as a two-ray Rayleigh fading channel. To compensate the demerit of analog delay locked loop, digital delay locked loop is employed for code tracking loop. Simulation and experimental examination has been carried out in AWGN(Additive White Gaussian Noise) and Rayleigh fading channel environment in order to prove validity of the proposed method.