• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.32-37
• /
• 2004

The charge/discharge capacity of natural graphite anode in lithium secondary batteries was examined as a function of charge/discharge rate. When the natural graphite anode was galvanostatically cycled in the range of 0.0-2.0V $(vs.\;Li/Li^+)$, the charging capacity decreased with an increase in the charging rate, which is caused by an earlier approach to the charging cut-off (0.0 V) before the complete charging that is in turn caused by an ever-increasing overpotential at higher rates. Even if the overpotential of discharging reaction also increased at higher discharge rates, the discharging reaction took place in the range of 0.0-0.3 V that is far below the discharge cut-off (2.0 V). As a result, the discharge capacity was not affected by the discharge rate because all the lithium ions once intercalated are fully discharged even at high current condition. As the overpotential of lithium deposition reaction also increased at high current condition, the charge capacity of natural graphite could be enlarged by lowering the charging cut-off voltage below 0.0 V, There is, however, a limitation for the lowering of cut-off voltage because the resistance for lithium deposition is smaller than that of lithium intercalation into graphite. When the charge cut-off voltage was lowered down to -0.04 V under IC condition, lithium ions were inserted into graphite without lithium deposition such that the discharge capacity could be raised up to $11\%$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.755-760
• /
• 2001

본 연구에서는 카본전극의 표면개질에 따른 리튬이온 전지의 전지특성 변화에 대해서 연구하였다. 즉, mesocarbon microbeads(MCMB) 카본에 에폭시 수지(resin)를 코팅시킴으로서 카본전극 표면에 개질시켰으며, 이에 따른 전극의 전기화학적 특성을 고찰하였다. 에폭시 수지에 의한 카본의 표면코팅은 30%의 H$_2$SO$_4$용액에서 2시간 동안 refluxing한 MCMB를 에폭시 수지를 용해시킨 THF(tetrahydrofuran) 용액에 넣어 혼합함으로써 MCMB 표면에 에폭시 수지가 코팅되도록 하였다. 이렇게 에폭시 수지가 코팅된 MCMB를 약 1000-130$0^{\circ}C$로 열처리하여 고분해능 투과전자현미경으로 관찰한 결과, 코팅층은 비정질 카본 구조를 갖게됨을 알 수 있었다. 또한, 에폭시 수지에 의하여 코팅된 MCMB는 코팅되지 않은 MCMB보다 더 높은 BET 비표면적을 나타내었다. Li/MCMB 전지 cell을 만들어 충방전시험을 수행한 결과, 에폭시 수지에 의하여 코팅된 MCMB로 만든 전극이 더 우수한 충방전 용량과 싸이클 특성을 나타내었다. 에폭시 수지 코팅으로 전극 표면을 개질시킴으로서 전지특성이 개선된 원인에 관하여 에폭시 코팅의 결정구조와 전극계면에서의 부동태 피막(passivation film) 형성과 연계하여 논의하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.107-108
• /
• 2011

납축전지는 전 세계 수천만 자동차부터 골프카트. 오토바이 등 동력기계에는 필수 장치로 널리 사용되고 있기 때문에 전지의 수명을 정확히 예측하고 평가하는 것이 중요하다. 본 논문에서는 납축전지의 충. 방전 특성을 고려해 동적 모델을 구현해 보았다. 회로의 구현을 위해 각기 다른 수명의 전지를 테스트하였고, 나타나는 특성 그래프의 변수들을 프로그래밍기법을 활용하여 전지의 특성을 해석할 수 있는 전기적 회로로 모델링하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.1
• /
• pp.46-52
• /
• 2003

유황 양 전극과 액체 전해질, 리튬 금속을 음극으로 사용한 리튬 유황 전지를 제조하여 그 특성을 조사하였다. 유황 전극은 유황파우더와 carbon black 을 도전재로, 그리고 바인더로 PVdF를 사용하여 제조하였다. 이렇게 제조된 셀은 두개의 다른 전압 구간에서 충방전 실험을 행하였다. 첫 번째 셀은 $S_8+{\chi}Li{\leftrightarrow}Li_2S_x(X=4{\sim}12)$ 반응만을 일어나 게 하기 위하여 2.1V 와 2.5V 사이에서, 그리고 두 번째 셀은 $Li_2S_x+{\chi}Li{\leftrightarrow}Li_2S(x=2{\sim}4)$의 반응만을 일어나게 하기 위하여 1.5V 와 2.5V 에서 충방전 하였다. 그 결과 첫 번째 셀이 더 좋은 싸이클 특성을 가지는 것을 확인 탈 수 있었다. 각 전압구간에서 각 셀이 충방전 되는 동안, 전해질 내로 녹아난 유황의 양은 큰 차치가 없는 것을 확인하였다. 그리고, 전압에 따른 전극의 임피던스를 측정한 결과, 방전이 끝난 후 큰 저항성분이 새로 생긴 것을 확인 할 수 있었다. 이는 사이클이 진행된 후의 전극표면을 SEM 분석을 행한 결과로부터 사이클이 진행된 후 전극 표면에 최종 반응 산물인 $Li_2S$ 가 피막형태로 형성된것을 확인 할 수 있었다.

• 한국전기화학회:학술대회논문집
• /
• 2002.10a
• /
• pp.15-15
• /
• 2002

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.127-132
• /
• 2024

Recently, secondary batteries, commonly known as rechargeable batteries, find widespread applications across various industries. Particularly valued for their compact and lightweight characteristics, they play a crucial role in diverse portable electronic devices such as smartphones, laptops, and tablets, offering high energy density and efficient charge-discharge capabilities. Moreover, they serve as vital components in electric vehicles and contribute significantly to the field of renewable energy as part of Energy Storage Systems(ESS). However, despite advancements in this technology, issues such as reduced lifespan, cracking, damage, and even the risk of fire can arise due to excessive charging and discharging of secondary batteries. To address these challenges, Battery Management System(BMS) are employed to protect against overcharging and improve overall performance. Nevertheless, understanding the protective range settings of BMS using lithium-ion batteries, the most commonly used secondary batteries, and lead-acid batteries can be challenging. Therefore, this paper aims to utilize a battery charge-discharge tester and simulator to investigate the charging and discharging characteristics of lithium-ion batteries and lead-acid batteries, addressing the associated challenges of reduced lifespan, cracking, damage, and fire hazards in secondary batteries.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.349-350
• /
• 2017

본 논문에서는 배터리 충 방전용 양방향 DC-DC 컨버터의 필터 인덕턴스와 제어특성의 영향을 분석한다. 필터 인덕턴스의 값을 변경하여 기존의 제어기법과 개선된 제어기법에 따른 특성 변화를 3 kW급 양방향 2상 인터리빙 DC-DC 컨버터 회로에 적용하여 분석하였으며 시뮬레이션을 통해서 타당성을 검증하였다.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.125-129
• /
• 2008

Rechargeable lithium-ion polymer batteries have been considered to be next-generation power sources for portable electronic devices and electric vehicles. In this work, we tried to improve the cycling performances of lithium-ion polymer cells by coating aluminum fluoride and acrylonitrile-methyl methacrylate copolymer to the polyethylene separator. It was found that the addition of aluminum fluoride to the surface-modified separator reduced the interfacial resistances and thus the cell exhibited a less capacity fading and better high rate performance. The cell showed an initial discharge capacity of 150 mAh/g and good capacity retention at 0.5 C rate.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.615-621
• /
• 2013

Membrane characterization methods for aqueous redox flow batteries aqueous RFBs were modified for non-aqueous RFBs. The modified characterization methods, such as ion exchange capacity, transport number, permeability and single cell test, were carried out to evaluate commercial membranes in non-aqueous electrolyte. It was found that columbic efficiency and energy efficiency in a single cell test were dependent on the ion selectivity of commercial anion exchange membranes. Neosepta AHA anion exchange membrane showed the anion transport number of 0.81, which is a relatively low ion selectivity in non-aqueous electrolyte, however, exhibited 92% of coulombic efficiency and 86% of energy efficiency in a single cell test. It was also found that a porous membrane without ion selectivity is suitable for a non-aqueous redox flow battery at a high current density.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.97-102
• /
• 2020

Recently, various degradation mechanisms of lithium secondary battery cathode materials have been revealed. As a result, many studies on overcoming the limitation of cathode materials and realizing new electrochemical properties by controlling the degradation mechanism have been reported. Li-rich layered oxide is one of the most promising cathode materials due to its high reversible capacity. However, the utilization of Li-rich layered oxide has been restricted, because it undergoes a unique atomic structure change during the cycle, in turn resulting in unwanted electrochemical degradations. To understand an atomic structure deterioration mechanism and suggest a research direction of Li-rich layered oxide, we deeply evaluated the atomic structure of 0.4Li₂MnO₃_0.6LiNi_1/3Co_1/3Mn_1/3O₂ Li-rich layered oxide during electrochemical cycles, by using an atomic-resolution analysis tool. During a charge process, Li-rich materials undergo a cation migration of transition metal ions from transition metal slab to lithium slab due to the structural instability from lithium vacancies. As a result, the partial structural degradation leads to discharge voltage drop, which is the biggest drawback of Li-rich materials.