• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.261-265
• /
• 2014

The ${\gamma}$-ray concentration and gross-${\beta}$ activity by age group were measured in the teeth of males and females of the domestic residents. They were divided into 7 age groups from 10s to the age of 70s. The gross-${\beta}$ activity concentration was measured by using the Tennelec XLB measuring instrument filled with P10 gas (argon 90%, methane 10%). The ${\gamma}$-ray was measured through the ${\gamma}$-ray spectroscopic analytical method by using the high purity germanium (HPGe) radiation detector. The range of gross-${\beta}$ activity concentration was measured 0.089 to 0.32 Bq/kg in females and 0.13 to 0.26 Bq/kg in males. From the ${\gamma}$-ray spectroscopic analysis of the teeth, the natural radioactive isotopes of $^{40}K$, $^{208}Tl$, $^{228}Ac$ and $^{234}Th$ were detected and their measured ${\gamma}$-ray activity concentrations were found to be 20.7, 21.9, 3.88 and 5.24 Bq/kg, respectively.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.859-865
• /
• 2014

This study was conducted to analyze the hydrocarbons and 2-alkylcyclobutanones as marker compounds in walnuts after the walnuts' exposure to ${\gamma}$ irradiation. The samples were irradiated with gamma rays at 0, 1, 3, 5, 7, and 10 kGy doses. The lipids were extracted via soxhlet extraction using hexane, and were separated by florisil column and identified via gas chromatography / mass spectrometry (GC/MS). The hydrocarbons that were detected were 8-heptadecene ($C_{17:1}$) and 1,7-hexadecadiene ($C_{16:2}$) from oleic acid and 8,11-heptadecadiene ($C_{17:2}$) and 1,7,10-hexadecatriene ($C_{16:3}$) from linoleic acid. The 2-alkylcyclobutanones that were detected were 2-dodecylcyclobutanone (DCB) from palmitic acid, 2-tetradecylcyclobutanone (TCB) from stearic acid, 2-(5'-tetradecenyl)cyclobutanone (TECB) from oleic acid, and 2-(5',8'-tetradecadienyl)cyclobutanone (5',8'-TCB) from linoleic acid. The correlation between the irradiation dose and the concentrations of the hydrocarbons and 2-alkylcyclobutanones in the walnuts was found to be linear. The radio-induced hydrocarbons and 2-alkylcyclobutanones were clearly detected in the irradiated walnuts at 1 kGy and above, but not in the non-irradiated ones. The major hydrocarbons obtained after irradiation were 8-heptadecene from oleic acid and 8,11-heptadecadiene and 1,7,10-hexadecatriene from linoleic acid, and the major 2-alkylcyclobutanones were TECB from oleic acid and 5',8'-TCB from linoleic acid. Therefore, these major compounds were concluded to be the marker compounds for determining the irradiated and non-irradiated samples.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.79-86
• /
• 2015

Korean territories has formed about 70% of mountainous areas that have acidified serious level to average pH 4-5. There are a number of abandoned metal mines about 1,000 in Korea. However, mine tailings and waste rock included heavy metals are exposed to long-term environment without prevention facility or treatment system. Thus, ongoing management and monitoring of soil environment are required. Most of abandoned mine scattered in forest areas of slopes. Soil erosion due to continuous rainfall in the slopy areas can cause the secondary pollution by the influence eutrophication of water system and the productivity loss of the plant. Therefore, this study would like to estimate pH leaching rate by artificial rainfall using waste neutralization-agent in lysimeter. Moreover, the potentially of secondary pollution related to precipitation is figured out through the experiments, and the optimal planting methods would examinate after neutralizing treatment in soil. Experiments composed three kinds of lysimeter; lysimeter 1 had filled only acidic soil, lysimeter 2 had neutralized soil, and lysimeter 3 had planting plants after neutralized soil. In the results, lysimeter 2 showed the lowest pH leaching, and there is not specific relativity with pH leaching of the seasonal characteristics.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.389-400
• /
• 2009

Iron and manganese contents are usually over the limit of drinking water standard (0.3 mg/L) in unconsolidated aquifer of river bank filtration site in Nakdong river. Surge block and air surging techniques used in this study are useful tools to remove the slime within gravels and pebbles, to increase permeability of aquifer, to provide oxygen into aquifer, and to discharge iron and manganese oxides from a well. Surging activity brought about $5{\sim}8$ and $5{\sim}9$ times decreases in $Fe_{(total)}$ and $Fe^{2+}$ contents, and also 10 times decrease in $Mn^{2+}$ contents compared to non-surging condition, respectively. Additionally, iron oxide and manganese oxide increased up $1{\sim}1.2$ times after surging. This result shows that air injection into the aquifer can help iron and manganese content decreased and in-situ treatment technology needs to be introduced in river bank filtration project in South Korea.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.5
• /
• pp.37-44
• /
• 2005

The main object of this study is to develop the infiltration facility that it can be used in grounds, parking areas, roads, pathway, housing etc. As a result, it is much alike in the infiltration method of facility to use permeable concrete, permeable hole and be filled with broken stones. And through this experiment, it was perceived the truth that the state of ground, the groundwater level, buildings around them, the history of submerging and the applicable infiltration facilities are the key. To verify how much the infiltration facility reduce the outflow, we set up the infiltration facility in the test area. In result, it reduced the outflow 89% in 24 mm rainfall, 93% in 12 mm, 51% in 140 mm, 75% in 64 mm and 80% in 54 mm. As the rainfall rate increased, the infiltration increased up to the limited rainfall. And in the limited rainfall, we knew that the infiltration was reduced suddenly. Infiltration is closely related to the state of ground, the rain interval etc. and we will analyze these conditions through the continuous monitoring.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.87-97
• /
• 2000

The effects of environmental conditions, initial dissolved oxygen concentrations, pH, and the presence of electron carrier vitamin $B_{12}$, on the reduction rate of Tn by $Fe^0$ was quantitatively analyzed using a batch reactor In all experiments, TNT reduction was best described with a first order reaction and the reduction rate decreased with the increase in the initial DO concentration. However, the specific reaction rate did not decrease linearly with the increase in the initial DO concentration. In the presence of HEPES buffer 0.2 and 2.0 mM(pH 5.7$\pm$0.2), the specific reaction rate increased more than 5.8 times, which showed reduction rate is rather significantly influenced by the pH of the solution. To test the possibility of reaction rate enhancement, well-known electron carrier(or mediator) , vitamin $B_{12}$, has augmented besides $Fe^0$. In the presence of 8.0 $mu\textrm{g}$/L of vitamin $B_{12}$, the specific reaction rate increased as much as 14.6 times. The results indicate that the addition of trace amount of vitamin $B_{12}$ can be a promising rate controlling option for the removal of organics using a $Fe^0$ filled permeable reactive barrier.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.47-52
• /
• 2008

This investigation was performed in order to study the properties of deposition and layers by Silicon Dioxide, SiO2, as dielectric onto Via and Trench which have high Aspect Ratio (AR). Thus, in order to confirm these properties, three types of CVD, which were PECVD, PETEOS, and ALD, were selected. On the experiment each of the property sections was estimated that step overage of PECVD: <30%, PETEOS: 45%, ALD: 75% and the RSM of PECVD: 27.8 nm, PETEOS: 2.1 nm, ALD: <2.0 nm. As a result of this experiment for the property of electric film, ALD was valuated to be the most favorable outcome. However, ALD was valuated to have the least quality for the deposition rate. ALD deposition rate, $10\;\AA/min$ by $1\;\AA$/1cycle, was prominently lower than PETEOS, which had the deposition rate of $5000\;\AA$/min. Since electric film requires at least $1000\;\AA$ thicknesses, ALD was not suitable for the deposition rate. which is the most important component in a practical use. Therefore, in this particular study, PETEOS was evaluated to be the most suitable recipe.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.289-296
• /
• 2007

Porous media for sewage treatment were developed through a pyrolysis process of food wastes with loess in the study. This work was carried out in two consecutive stages; in the first stage, new porous media were prepared through a high temperature pyrolysis process, and then the resultant media were applied to a simple lab-scale sewage treatment process in the second stage. To determine the optimum operating conditions of pyrolysis and mixing ratio of materials, physical properties such as specific surface area, porosity and compressive strength of final products were analyzed. The removal efficiencies of TOC and COD were measured to evaluate the effectiveness of resultant porous media. As a result of the experiment, we found that the best mixing ratio of food wastes to loess was 1 : 1 at $1,100^{\circ}C$. Average porosity of the developed media was 37.0%, in which pore size ranged from 1 to $20{\mu}m$, showing quite vigorous microbial activation. After immersing the media into a reactor for sewage treatment for eight days, removal efficiencies of TOC and COD were 87.3% and 85.0%, respectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.57-58
• /
• 2001

용수 다소비 산업으로 분류되는 제지공업의 특성 상, 용수사용의 억제 및 용수의 무방류화에 대한 압력이 증가되고 있는 반면, 초지환경은 날로 열악해지고 있는 실정이다. 한 예로써, 용지의 재활용율 및 재사용 비율이 증가함에 따라 원료의 저급화가 심 각한 수준에 이르고 있으며, 이러한 초지환경의 변화는 각질화되고 극도로 미세화된 다량의 미세섬유 발생 및 잡고지로부터 유입되는 점착성 이물질과 무기 충진제의 도입 등을 유발함으로서 제품의 물리적 성질 저하, 탈수부하 증가로 인한 생산성 저하, 약품사용량 증가 등을 초래하여, 결과적으로는 폐수처리장의 부하를 증대시킴과 동시에 청수사용량 및 폐수방류량을 증가시키는 악순환을 되풀이하게 된다. 국내 제지산업이 국제적 경쟁력을 갖추기 위해서는 제품의 증대가 필수적이나, 원료와 설비의존도를 감안할 때, 제품특성과 공정 분을 결정하는 습부공정을 정확히 파악하여 최적 운전조건을 확립하는 것이 가장 경제적이고 용이한 방법일 뿐만 아니라 전체 제지공정의 정정화에도 기여할 수 있을 것으로 판단된다. 일정규모이상의 종이를 생산하는 제지공장은 거의 대부분 컴퓨터로 처리되는 온라인 공정조절 시스템(On-line process control system)을 구비하고 료의 도입에서부터 설비운전 및 제품의 기본적인 품질관리까지 실시간의 자동화되고 안정적인 운전과 관리시스템을 유지하고 있다. 그러나 전체 제지공정 중, 제품 물성과 운전조건의 대부분을 결정하는 습부공정만큼은 아직도 주기적인 분석이 행해지고 있지 않을 뿐만 아니라, 슬러리의 농도나 보류도 정도를 제이하면 분석항목 조차도 변변히 확립되어 있지 않을 실정이다. 이는 다량의 물 속에 존재하게 되는 용전물질(Dissolved solids, DS), 부유물질(Suspended solids, SS), 섬 유(Fibers), 무기 미 세분(Inorganic f fines), 그리고 투입되는 약품간에 발생하는 계면동전현상 및 이러한 현상과 최종 지제 품의 물성간의 상관관계에 대한 이해 정도나 경험 부족에서 기인하는 것으로 생각된다. 1 1983년 미국제지기술연합회(T APpI)의 제지용 첨가제 분과위원회(Papermaking A Additive Committee)에서는 습부공정의 적절한 조절을 위해 어떤 항목들이 필요하며 그 중요도는 어떠한가를 조사하였으며, 그 결과로 전하밀도, 제타전위, 보류도 및 여수 도, 무기 미세분 함량 등이 중요하다고 보고하였다. 그러나 지료의 전기적 특성을 실시 간으로 측정하는 기자재류가 최근에 이르러서야 도입되고 있는 실정이기 때문에 충분 한 현장적용 사례가 보고되지 못하고 있으며, 결과적으로 얻어진 정보와 최종 지제품의 물성 및 초지기 운전조건과의 상관관계를 확립하는 작업결과는 더욱 찾아보기 어렵다. 따라서, 본 연구에서는, 라이너지 제조공장의 습부공정에 투입되는 약품이 지료 의 전기적 성질, 즉 전하밀도와 제타전위에 미치는 영향을 모니터링함으로서 지료의 전기적 성질들과 습부 공정상태와의 상관관계를 살펴보고자 하였다. 본 연구는 다음과 같은 순서로 진행하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.131-135
• /
• 2020

Single crystal phased CaZrO₃ : Eu³⁺ phosphor have been synthesized by skull melting method. The crystal structure, morphology and optical properties of synthesized phosphor were investigated XRD (X-ray diffraction), SEM (scanning electron microscopy), UV (ultraviolet) fluorescence reaction and PL (photo luminescence). The starting materials having chemical composition of CaO: ZrO₂ : Eu₂O₃= 0.962 : 1.013 : 0.025 mol% were charged into a cold crucible. The cold crucible was 120 mm in inner diameter and 150 mm in inner height, and 3 kg of mixed powder (CaO, ZrO₂ and Eu₂O₃) was completely melted within 1 hour at an oscillation frequency of 3.4 MHz, maintained in the molten state for 2 hours, and finally air-cooled. The XRD results show that synthesized phosphor is stabilized in orthorhombic perovskite structure without any impurity phases. The synthesized phosphor could be excited by UV light (254 or 365 nm) and the emission spectra results indicated that bright red luminescence of CaZrO₃ : Eu³⁺ due to magnetic dipole transition ⁵D₀→⁷F₂ at 615 nm was dominant.