• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1199-1203
• /
• 2011

Nanocomposites were prepared through the compounding of rubber and clay. Measurements of the static and dynamic mechanical properties of different compositions over a temperature range $70-100^{\circ}C$ showed that the mechanical properties of these rubber/clay nanocomposites are superior to those of existing rubber materials. In this study, by using the parameter of the maximum Green.Lagrange strain appearing at certain locations, the relationship between fatigue life and maximum Green.Lagrange strain, and the correlations between test-piece tests and bench tests of actual rubber components are proved. In order to predict the fatigue life of rubber components at the design stage, a simple procedure of life prediction is suggested. The predicted fatigue lives of the rubber engine mounts agree fairly well with the fatigue lives determined experimentally.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.401-401
• /
• 2012

유기발광소자는 유연 소자로의 적용, 자체 발광 등의 장점으로 차세대 디스플레이로서 각광받고 있다. 하지만 유기발광소자는 유기물을 발광층으로 하고 있기 때문에 수분에 취약하다는 단점이 있다. 그래서 봉지 기술(encapsulation)을 필요로 한다. 널리 알려진 방법으로는 유리로 소자를 감싸고 내부에 흡습제를 충진하여 수분 투습을 줄일 수 있다. 하지만 위 기술을 사용할 경우 유기발광소자의 장점인 유연 소자의 적용이 어렵다. 따라서 박막 봉지 기술을 이용하면 보다 얇은 두께의 소자 제작이 가능하고 유연 소자의 적용 역시 가능해진다. 박막 코팅을 이용한 봉지 기술 중 화학적 증착법(Chemical Vapor Deposition, CVD)이나 물리적 증착법(Physical Vapor Deposition, PVD)을 이용하는 방법이 널리 알려져 있지만 원자층 증착법(Atomic Layer Deposition, ALD)을 이용하면 보다 낮은 두께의 치밀한 박막을 제작 할 수 있다. 본 연구는 원자층 증착법을 응용한 분자층 증착법(Molecular Layer Deposition, MLD)을 이용하여 Trimethylaluminum과 Ethylene glycol을 순차적으로 주입함으로써 Alucone 유기 박막을 제작하고 유기발광소자의 봉지 기술로의 적용을 위해 투과 방지막 특성에 관하여 분석했다. 박막 봉지 기술로서 적용하기 위해 제작된 투과 방지막은 원자층 증착법으로 Al2O3무기 박막을 제작하고 분자층 증착법으로 Alucone 박막을 순차적으로 증착하였다. 이를 Ca를 이용하여 전도도를 측정하고, 투습도를 계산하여 투과 방지막 특성을 분석하였다. Alucone 박막은 우수한 투과 방지막 특성을 가지지는 못하지만 적층 구조로 제작함으로써 두 쌍의 Alucone/Al2O3일때, $6.07{\times}10^{-2}g/m^2day$의 투습도를 보여주고 있다. Alucone 박막의 존재는 수분이나 산소의 투과 경로 길이를 늘려줌으로써 Alucone/Al2O3 박막의 투과방지 특성이 향상되는 것으로 사료된다.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.183-190
• /
• 2010

We fabricated urethane material based on properties of reversible and unfading for antic-ceramics restoration. This material with low viscosity was made hardness control possible that user want. And it have very strong adhesion and shear strength properties and is shown the best properties for pigment filling, anti-contractibility, coloring as like epoxy system materials. Particularly, the yellowing and ir-reversibility problem in epoxy restoration material were finally solved. So, there is guarantee in the eternity and stabilization of restoration for antic-celamics. And in order to show the reversible state of the restoration, we successfully dissolve this urethane materials in solvent after perfect restoring subsequently.

• Journal of Veterinary Clinics
• /
• v.37 no.5
• /
• pp.278-281
• /
• 2020

A 4-year-old Thoroughbred stallion was referred to J&C Equine Hospital with a quarter crack of the right front foot. On visual inspection, there was a medial quarter crack with laminar necrosis. The first step to treat this problem was to remove the necrotized tissue around the crack using Dremel tools, disinfecting crack, administering antibiotics through regional limb perfusion and systemically administering antibiotics and anti-inflammatory drugs consistently. After one month's anti-inflammatory management, the quarter crack was treated successfully using two series of wiring with one week's term and polymethylmethacrylate composites (Equilox^㉿). After treatment, this racehorse successfully resumed training and racing in Korea Racing Authority Seoul Race Course, and won three times, finishing second and third place once, out of thirteen starts.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.5-12
• /
• 2005

In early days, to analyze the behavior of single pile under axial load, many assumptions were made and field tests were performed. But in recent days, the development of computers led the use of the numerical analysis resulting in more realistic and correct results. The numerical methods are classified into Load Transfer Method and Elastic Solid Approach. In this study a numerical program applying t-z model to Load Transfer Method suggested by Coyle & Reese was developed. And another finite difference program using matrix based on this load transfer was developed. As a result, it is found that the values of the F.D.M. were similar to the values measured in-situ.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.365-373
• /
• 2003

Instead of deodorization appararus of fish oil, an adsorbent such as activated charcoal, activated alumina, silicagel, bamboo charcoal was packed in column alone or mixed with preparative ratio, and then test the effective deodorization with bleaching. In the progress of degumming, the effective method was 18 ml of 2.5% oxalic acid per 100m1 of crude large anchovy oil. The optical condition to deacidified was treating for 30 min at $40^{\circ}C$ with 2.5% sodium hydroride solution. The effective deodorization was added with 3% silicagel under the alone treating adsorbent, and mixed treating was 30% activated alumina and 10% silicagel but added to green tea powder was not effective. The major fatty acid of total lipid were 16:0, 20:5n-3, 18:1n-9, 16:1n-7 and 22:6n-3 after treatment of degumming, deacidfication and deodorizing in the large anchovy oil. The oxidative stability of refined anchovy oil added to $\alpha$-tocopherol was validated 20 days under the control, and 30 days in the case of $\alpha$-tocopherol. The 0.01% $\alpha$-tocopherol was more effective than 0.02% $\alpha$-tocopherol.

• Applied Chemistry for Engineering
• /
• v.35 no.3
• /
• pp.155-181
• /
• 2024

In recent years, significant research has been conducted to enhance the performance of existing membranes for efficient CO₂ capture, aiming to expand their application in carbon capture processes. Membrane technology has emerged as a promising carbon capture approach to addressing the net-zero challenge due to its cost and energy efficiency, continuous operation, and compact process size. Among the various types of membranes studied, mixed-matrix membranes (MMMs) have been proposed as an alternative to conventional membranes to enhance the efficiency of gas separation processes. Various common 2D nanomaterials, characterized by their ease of modification, functionalization, and compatibility with other materials, have been used to create efficient MMMs for gas separation. This article comprehensively reviews the recent developments in MMMs using 2D nanomaterials. It also discusses the current challenges and prospects of 2D nanomaterial-based membranes for CO₂ separation and capture.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.285-292
• /
• 2013

This study was carried out to validate the safety of ametoctradin residues in agricultural commodities by developing an official analysis method. An analytical method was developed and validated using HPLC-PDA detectors. The samples were extracted with methanol, subsequently partitioned with dichloromethane and purified with florisil column chromatograph using acetone/hexane (30/70, v/v) as solvent. The method was validated by using grape, hulled rice, mandarin, and potato spiked with ametoctradin at 0.05 and 5.0 mg/kg, and pepper at 0.05 and 2.0 mg/kg. Average recoveries were 76-114.8% with relative standard deviation less than 10%, and the limit of detection and limit of quantification were 0.0125 and 0.05 mg/kg, respectively. The result of recoveries and overall coefficient of variation of the laboratory results from Gwangju regional Food and Drug Administration (FDA) and Daejeon regional FDA was accorded with Codex Alimentarius Commission Guideline (CAC/GL 40). Based on these results, this method was found to be appropriate for ametoctradin residue determination and can be used as the official method of analysis.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.93-99
• /
• 2017

Collagen synthesis is decreased and matrix metalloproteinase-1 (MMP-1) levels are increased in naturally aged human skin, and these alterations cause changes such as skin wrinkling and decreased elasticity. As a part of our ongoing search for bioactive ingredients, MMP-1 inhibitory and type-1 procollagen synthesis inducing activities of aqueous methanolic extract of manufactured gambir product from Uncaria gambir were investigated in in vitro bioassay systems. In addition, total phenolic contents were quantified using a spectrophotometric method. Among tested samples, 40% MeOH eluate from 80% methanolic extract of manufactured U. gambir using open column chromatography packed with Diaion HP-20 resin showed significant MMP-1 inhibitory activities with an $IC_{50}$ value of $15.6{\pm}1.3{\mu}g/mL$. Furthermore, type-1 procollagen synthesis promoting property of 40% MeOH eluate ($IC_{50}$ value; $6.9{\pm}0.7{\mu}g/mL$) from 80% methanolic extract of manufactured gambir was higher than other eluates. Additionally, the present investigation revealed that 40% MeOH eluate of manufactured gambir product contained a high level of total phenolic compounds. The result suggests a distinct relationship between anti-wrinkle activity and total phenolic contents, and manufactured gambir product could be considered a new effective source of natural bioactive ingredients. Systematic investigation of manufactured gambir product will be performed for further development of its biological properties.